• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.9-15
• /
• 2018

This study investigates a bidirectional quasi-Z-source inverter (Bq-ZSI) system with bidirectional power transfer capability and a modified space vector modulation scheme for reducing the ripple of the inductor current. By replacing the diode in the impedance network with an active switch, the power flow can be bidirectional. The average inductor current of the Bq-ZSI network is negative in the regenerative braking mode, thereby regenerating the power. In addition, modified space vector modulation scheme is applied to the Bq-ZSI to control shoot-through time effectively. A 5 kW prototype is built and tested to implement the proposed system. Experimental results show that the Bq-ZSI system is capable of regenerative braking of the induction motor and that the modified space vector modulation method is efficient.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.13-19
• /
• 2017

This paper presents safety assessment scenarios for cyclist autonomous emergency braking(AEB) system. To assess the safety performance of AEB in real traffic situation with limited number of scenarios, scenario should reflect the characteristics of real traffic collision cases. For this, statistic data of real traffic car-to-cyclist collision in Korea are analyzed. Many types of accidents are listed and categorized based on the movement of vehicle and cycle just before the collision. Then, the characteristics, main issues and limitations of each scenarios are discussed. Not only the test scenario itself but also the cost and time for the test are very important issues for the test scenarios to actually repeat the test for various systems. Also, the performance of AEB can be effected by the algorithm of AEB and the technical limitation of the sensors and hardwares. Therefore, required number of tests, possibility of dummy destruction and other technical issues are discussed for each scenarios. Based on these information, typical scenarios are selected. Also, using this information, vehicle speed range, cyclist speed and collision point are established. Proposed scenarios are verified and modified based on the vehicle test results. vehicle test was evaluated 5 times for each scenarios. Based on this results, final test scenarios are modified and proposed.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.85-96
• /
• 2010

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issues in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. The efficient use of regenerated energy is considered to save energy. Namely, Using regenerative energy is that to store the energy generated during braking and discharge it again when a vehicle accelerates. Reusing energy stores and discharges energy, consequently enables a complete exchange of energy between vehicles, even if they are not braking and accelerating at precisely the same time, as is most frequently the case in everyday service. This paper analyzes effects of energy saving and $CO_2$-cut by using regenerative energy of electric vehicles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.971-975
• /
• 2005

In this study, a car-door-controlled collision protection system using proximity sensor is proposed and its preliminary analysis and several preliminary experiments are conducted. The proposed system has three additional sub-components on the car-door that is, a pair of extra electro-magnetic actuator that are attached to the sliding bar of the open/close car-door four-bar mechanism, a proximity sensor that would be attached to the outside surface of the door which is likely to frequently contact to the object and a driving control circuit of the whole system. A proximity sensor is used to detect object close to the car-door, the driving control circuit provides actuating power command to the electro-magnets to generate braking force to stop the swing motion of the car-door. It is verified through kinematic analysis of the four-bar car-door open/close mechanism and through experiments that the magnitude of maximum electronic magnetic force could provide the braking force enough for this application. For this purpose, an electro-magnet driving circuit is implemented and tested. And also to increase the safety of the system a time delay circuit is implemented and tested.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.596-603
• /
• 2020

전기기계식 제동장치(EMB : Electro-Mechanical Brake)는 자동차 및 철도차량의 차세대 제동장치로서 현재 연구가 활발히 진행되고 있다. 현재의 철도차량용 제동장치는 공압 실린더를 이용하여 제동 압부력을 발생시키나 전기기계식 제동장치 (EMB)에서는 전기 모터 및 기어와의 조합을 통하여 압부력을 발생시킨다. 본 연구에서는 고압부력 발생이 가능한 편심회전축 기반의 전기기계식 제동장치에 대한 유한요소 모델링 및 내구 수명해석을 통하여 국내 기준에 부합하는 전기기계식 제동장치의 설계를 진행하였다. 이때 내구수명해석의 정확도를 향상하기 위하여 시제품에 사용되는 소재와 동일한 열처리 등을 거친 피로시험 시편을 3종을 제작하여 소재별로 피로시험을 진행하였다. 각각의 소재에 대한 피로시험 결과로부터 피로물성치(응력-수명 선도)를 획득하여 해석모델에 반영하였다. 피로해석 결과로부터 EMB 시제품의 설계가 국내 철도차량용 내구수명 조건인 상용최대 제동/완해 53 만회를 만족할 수 있음을 확인하였다. 또한, 이 설계를 바탕으로 시제품을 제작하고 내구시험을 완료하여 개발된 시제품의 내구성 특성을 입증할 계획이다.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.150-155
• /
• 1995

In order to analyze the thermal effects of the rotor models, the finite element technique was used in this study. The length of the hat was investigated as a design parameter. At the start of each brake application the disk surface temperature rapidly increases to a maximum value and then decays due to external cooling and thermal conduction to the hat. The calculated results indicate that the long length of the hat shows the minimum deformation in axial direction, which is related to the thermal problems, coned wear, vibration and noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.397-400
• /
• 2001

In eddy, current brake system(BS), high current may flow for increase of braking force within a short time. Therefore, the estimation of thermal characteristics for BS is required. In this paper, the thermal characteristics of eddy-current brake for the Korean high speed train are analyzed by using 2-dimensional Finite Element Method (2D-FEM) and measured.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.485-493
• /
• 1998

The EMS/LIM driven system, called UTM-01 has been under development for LRT type urban transit applications. At the present time, the 1st vehicle of UTM-01 (a two vehicle system) is undergoing various tests on the 1.1km test track at the KIMM premises in Taejon. This paper describes the design, characteristics and test results of the Levitation /Guidance, the Propulsion/Braking System and the Leakage Flux for 1st vehicle of UTM-01.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1099-1105
• /
• 2000

The interactive bicycle simulator presented in this paper consists of a Stewart platform manipulator, magneto-rheological steering and braking devices, and a visual simulator. To provide a rider with reality, these devices should be controlled in real-time and motions of the devices and the visual should be also synchronized. If any of the devices and the visual gets unsynchronized due to significant blocking of control signals, the reality of the simulator is no longer secured. This paper presents communication protocols that minimize the blocked time of the control processes to guarantee the synchronization. The protocols are designed based on IPC (InterProcess Communications) of QNX, TCP/IP, and serial communication. The performance of the designed communication protocols is evaluated with the implemented bicycle simulator, and found satisfactory.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.609-615
• /
• 2012

무인운전 경전철 운전계획을 위해 수동운전 기반의 TPS(Train Performance Simulation) 대신에 ATO(Automatic Train Operation) 자동운전에 기반한 TPS가 요구된다. 본 논문은 ATO 패턴을 사용하는 새로운 TPS 모델을 제시하고, 서울지하철 6호선의 시험구간과 부산-김해 경전철 전체 노선의 실제 자동운전 운행결과와 시뮬레이션 결과를 비교하였다. 실제와 유사한 ATO 운행패턴은 상용감속도, 저크, 역정차감속도, 구배환산거리의 4가지 파라미터를 도입한 새로운 TPS 모델에 의하여 매우 정밀하게 시뮬레이션 될 수 있다. 무인 자동운전을 위한 상업운전용 표정시분은 ATO기반 TPS의 "Fast" 운전모드 운행시간에 경전철 표준사양에 따라 km당 3초의 여유를 가지도록 본 논문에서 제시된다.