• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.676-681
• /
• 2005

The regenerative braked cars are being introduced in DC electric railway for energy saving. There has been a recent tendency for DC traction substation with regenerative inverter to increase in number. This is strongly related to the desire for effective utilization of electric power regenerated by DC electric cars and to the aim ensuring stable operation of regenerative braking system. The regenerative inverters DC power feed back from a generative car into AC power at a substation and supplies it to distribution lines. This paper suggest the result of characteristic analysis and capacity simulation. economical analysis in the regenerative inverter system.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.54-59
• /
• 2010

In order to develop the deep-underground GTX (Great Train eXpress) in domestic, the running performance analysis of the propulsion system by a variety of route condition must be carried out before studying the specification and the development of the high-speed propulsion system with inverter and traction motor. Then it is necessary to study the running resistance properties of the high-speed traction system for the variety of tunnel type and vehicle organization method at first. In addition, the properties of the power requirement of the traction motors needed to maintain the balanced speed of the high-speed traction system are next studied. We need to study properties of the emergency braking distance caused by the highest operation speed of the high-speed traction system and present the fundamental design technologies to develop the high-speed traction system for the deep-underground GTX. Finally, the paper analyzes the applicability of the conventional Korean Tilting Train eXpress (TTX) propulsion system on the high-speed propulsion system for the deep-underground GTX.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.778-784
• /
• 2017

본 논문에서는 철도화물 물류 효율화를 위한 유선 분산제어시스템과 무선 분산제어시스템 구성방안을 제안하고, 유선 분산제어시스템에 대한 검증을 수행하였다. 검증조건은 화물차량 50량을 연결하여 부산신항에서 진례역까지 21km를 평균속도 약 100km/h로 왕복 운행하였다. 검증결과는 분산중련에 의하여, 제어차와 피제어차의 견인출력과 제동출력이 분산됨을 확인하였다. 이와 같은 분산제어 적용시 기존 화물수송의 2배이상의 물류효율성향상을 기대할 수 있다. 다만, 유선 분산제어시스템의 경우 케이블 포설 및 유지보수가 어려우며, 화물차량의 편성 변경조성이 불가능한 단점이 있다. 유선 분산제어시스템의 검증을 통하여 국내 화물차량에 분산제어시스템 적용가능성을 확인하고, 이를 발전시켜 무선분산제어시스템 적용하기 위함이다. 무선 분산제어시스템 적용을 위하여, 검증구간에 ISM 대역에 대한 전파환경분석을 수행하였고, 그 결과, 해당 구간에 ISM 대역에 Wifi 기술 적용이 가능함을 확인하였다. 또한 대상 차량에 신규 설치되는 WDP(Wireless Distributed Power) 장치 적용을 위하여 추진/제동/종합제어장치와의 송수신 제어신호에 대하여 정의하였다. 무선 분산제어시스템의 경우, 적용과 운용의 편의성이 보장되지만, 차량의 제어를 무선에 의존함에 따라 신뢰도와 비상시 안전대책 수립이 선행되어야 한다.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.57-64
• /
• 2020

첨단 운전자 보조시스템(ADAS, Advanced Driver Assist System)의 주요 기술에는 적응형 순항 제어(ACC, Advanced Cruise Control), 주행 조향보조 시스템(LKAS, Lane Keeping Assist System), 자동 긴급제동 시스템(AEB, Autonomous Emergency Braking) 등이 있다. ADAS 중 LKAS는 카메라(camera)와 적외선 센서(sensor)를 사용하여 운전자가 의도하지 않은 차선이탈이 발생하였을 때, 조향 보조장치를 제어하여 주행 차선으로 복귀하는 시스템이다. 이러한 시스템의 안전성 평가와 검증을 위해 실차시험을 진행한다. 그러나 LKAS 동작 후 임의의 추가 조향각이 인가될 경우에 대한 연구는 미흡하다. 본 논문에서는 선행연구에서 제안한 시나리오에 대해 Prescan을 이용하여 추가 조향각 인가 모델링(modeling)기법을 개발하고 시뮬레이션(simulation) 하고, 실차시험을 통해 취득한 데이터(data)와의 비교분석으로 모델링 기법의 타당성을 검증하였다. 앞바퀴부터 차선까지 최대 거리오차는 0.56 m이며, 시뮬레이션과 실차시험의 차선 복귀 속도의 차이로 인해 발생하였다. 시뮬레이션과 달리 실차시험은 주행 차선으로 복귀 속도가 느려 이탈하는 차의 횡방향 변화가 상대적으로 적어 시뮬레이션과 오차가 발생한 것으로 판단된다. 시뮬레이션과 실차시험 값의 비교분석 결과 차선복귀 속도 차이는 있지만 앞바퀴부터 차선까지 거리가 약 0.5m로 수렴하는 경향성을 나타내어 신뢰성을 확인할 수 있었다.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1763-1769
• /
• 2007

To improve the cycle-life and efficiency of an energy storage system for HEV, a dynamic control system consisted of a switch between a battery and an ultracapacitor module is proposed, which is appropriate for mild hybrid vehicle with 42V power net. The switch can be controlled based on the status of the battery and the ultracapacitor module, and a control algorithm that could largely decrease the number of high charging current peak is also implemented. Therefore the cycle life of the battery can be improved such that it is suitable for a mild hybrid vehicle with frequent engine start-stop and regenerative-braking. Also, by maximizing the use of the ultracapacitor, the system efficiency during high current charging and discharging operation is improved. Finally, this system has the effects that improves the efficiency of energy storage system and reduces the fuel consumption of a vehicle. To verify the validity of the proposed system, this paper presented cycles test results of different energy storage systems: a simple VRLA battery, hybrid energy Pack (HEP, a VRLA battery in Parallel with Ultracapacitor) and a HEP with a switch that controlled by energy management system (EMS). From the experimental result, it was proved the effectiveness of the algorithm.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.145-153
• /
• 2021

Automated Guided Vehicle (AGV) is commonly used in manufacturing plant, warehouse, distribution center, and terminal. AGV is self-driven vehicle used to transport material between workstations in the shop floor without the help of an operator, and AGV includes a material transfer system located on the top and driving system at the bottom to move the vehicle as desired. For navigation, AGV mostly uses lane paths, signal paths or signal beacons. Various predominant sensors are also used in the AGV. However, in the conventional AGV, there is a problem of not turning or damaging nearby objects or AGV in a narrow space. In this paper, a new driving system is proposed to move the vehicle in a narrow space. In the proposed driving system, two sets of the combined steering-drive unit are adopted to solve the above problem. A prototype of AGV with the new driving system is developed for the comparative analysis with the conventional AGV. In addition, the experimental result shows the improved performance of the new driving system in the maximum speed, braking distance and positioning precision tests.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.666-670
• /
• 2011

ATS(Automatic Train Stop)s are is effected by track environment, signal distance and train braking distance. So onboard signaling systems such as ATP(Automatic Train Protection) are installed on conventional lines by some train operation companies. With the mixed signalling, the onboard signaling system is overlaid on a conventional line with ATS, it is possible to run the line with conventional trains and ATP trains and to use the advantages of ATP(higher speed or more trains on the line). This paper includes guidelines a mixed signalling(ETCS and ATS) system architecture, operation concepts and infill balise installation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2998-3006
• /
• 2011

This paper is about the relations between the electric multiple unit and ESS(Energy Storage system, here after) applying bi-direction Buck-Boost Converter. ESS may be possible to suppress the line voltage drops and the power loading fluctuations and to save the regeneration power lapses. This paper confirm for simulation that ESS reusing regenerative power generated during braking in train. Also, presents the influence of regenerative power variation of train and catenary acceptability for energy saving obtained by applying the ESS to Daejeon Metro line 1.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1608-1611
• /
• 2004

Anti-lock brake systems (ABS) are being increasingly used in a wide range of applications due to safety. This paper deals with a high performance optimal sliding mode controller for slip-ratio control in the ABS. In this approach a sliding surface square is considered as an appropriate cost function. The optimum brake torque as a system input is determined by minimizing the cost function and used in the controller. Simulation results reveal the effectiveness of the proposed sliding mode controller.