• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2007년도 추계학술 발표회
• /
• pp.207-211
• /
• 2007

• 드라이브 ㆍ 컨트롤
• /
• 제2권2호
• /
• pp.13-20
• /
• 2005

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.173-173
• /
• 2007

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.372-376
• /
• 2001

Due to several advantages of Pulse Width Modulation(PWM) Converter, such as unity power factor operation, elimination of low-order harmonics and regeneration of motor braking energy to source, the application range of PWM Converter has been rapidly extended in industrial application. Nowadays, vector control algorithm and space vector PWM(SVPWM) method are applied to improve the performances of PWM Converter, but vector control algorithm and SVPWM require to use Microprocessor and other digital devices in hardware, causing costly and somewhat large dimension system. In every practical application of energy conversion equipments, the design and implementation should be carried out considering cost and performance. High performance and low cost is the best choice for energy conversion equipments. So, this paper presents the practical design method and implementation results of 3-phase PWM Converter with analog hysteresis current controller, and verifies the performances of unit power factor operation and energy regeneration operation via experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.240-244
• /
• 1989

This paper describes an electric vehicle DC-DC drive system capable of delivering motoring current and of generating braking current. The power transistor chopper Is adopted to operate a DC series motor. The transistor chopper adopted, a high chopping frequency and avoids additional inductance In series with the armature winding. The four-quadrant drive is applied to save the energy. The energy saving is critical in operating the Independent power source electric vehicle. Using software simulation, regeneration and braking characteristics are investigated. The microprocessor-based controller is used to operate the whole system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.966-971
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and CO2 emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the Energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut CO2 to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. This paper presents effects by applying the energy storage system to SeoulMetro Line 2.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.290-295
• /
• 2004

Electrification of existing railroad as well as extension of double track, need a large amount of electric energy. Especially, increase in energy consumption of high cost causes much problems in domestic economy. It is neccessary to save energy for the crisis of exhaust of fossil energy. About $20{\~}25\%$ of regenerated energy of an electric railcar is lost on down slope run or on braking. In order to save energy in electric railway system, Therefor, application of energy regeneration system is proposed and introduced in the present paper.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1287-1295
• /
• 2002

In this work, the fuel economy of a parallel hybrid electric vehicle is investigated. A vehicle control algorithm which yields operating points where operational cost of HEV is minimal is suggested. The operational cost of HEV is decided considering both the cost of fossil fuel consumed by an engine and the cost of electricity consumed by an electric motor. A procedure for obtaining the operating points of minimal fuel consumption is introduced. Simulations are carried out for 3 variations of HEV and the results are compared to the fuel economy of a conventional vehicle in order to investigate the effect of hybridization. Simulation results show that HEV with the vehicle control algorithm suggested in this work has a fuel economy 45% better than the conventional vehicle if braking energy is recuperated fully by regeneration and idling of the engine is eliminated. The vehicle modification is also investigated to obtain the target fuel economy set in PNGV program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2998-3006
• /
• 2011

This paper is about the relations between the electric multiple unit and ESS(Energy Storage system, here after) applying bi-direction Buck-Boost Converter. ESS may be possible to suppress the line voltage drops and the power loading fluctuations and to save the regeneration power lapses. This paper confirm for simulation that ESS reusing regenerative power generated during braking in train. Also, presents the influence of regenerative power variation of train and catenary acceptability for energy saving obtained by applying the ESS to Daejeon Metro line 1.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.204-212
• /
• 2010

전동차가 주행중에 브레이크 페달의 작동으로 주행모터의 양단에 발전된 전류는 전기에너지 특성상 바로 소비되지 않으면 제동력이 발생하지 않는 현상(회생 실효)가 발생하기 때문에 주변에 역행차량이 없거나 가선 전압이 안정되지 않는 경우 안정된 제동성능을 확보할 목적으로 발전제동을 병설한 차량이 존재하고 있다. 그래서 입력된 에너지의 55%를 전동차에서 소비하고 하구배 구간이나 회생 제동시 45%의 입력에너지 사용되며 그중25%는 가선을 통해 다른차 의 역행을 사용되므로 기존의 시스템을 크게 벗어나지 않고 회생 수단,회생 실효를 줄이기 위해서는 변전소의 배출전압저하(5%)정도 하여 회생시 지나친 가선 전압 상승를 완화 시킬 수 있다. 실제로 1호선 직류구간에 혼잡시간때 한구간에 상선기준으로 3대의 전동차가 운행되어 1500V의 전압측정과 비혼잡시간에는 1대~2대의 전동차정도 운행으로 1700~1800V 측정되므로 5%정도 조정은 운행에 지장을 초래하지 않을것으로 사료된다. 적정전압 측정 데이터을 통한 탄력적인 배출전압 조정을 통해 지하철 또한 에너지 소비효율을 위한 연구가 필요하다고 본다.