• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.29-36
• /
• 1998

In this paper, two-stage braking method of 3-phase induction motrois proposed. This brake involves tow stages. The first stage is capacitor self-excitation braking, and the second stage is three-phase magnetic braking. In several applicatons, a low cost and effective brake is required for three-phase induction motor. A mechanical friction brake, typical braking method for induction motor requires external energy sources which is not safe, expensive and requires maintenance. Static and dynamic analyses of the proposed brake scheme are along with analytical result, simulated waveforms and experimental waveforms are compared. The experimental results shows good agreement with the simulated results.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.40-44
• /
• 2007

Light rail vehicle is optimized vehicle system for complex urban circumstance. LRT systems have many merits such as improve accuracy, speediness and safety. There are many LRT systems such as monorail, tram, automated guideway transit, linear induction motor propulsion and so on. These systems have operated in Japan and other advanced countries. In Korea, local government has many projects to apply the advanced LRT system. But there are no standardized specification, performance test specification, construction specification for monorail system, linear induction motor propulsion system, tram in Korea up to now. So, we need to establish of standardized to economical construction and safety. The linear induction motor system has been usually applied in Japan subway and ART(Advanced Rapid Transit) of Canada. In Korea, the linear induction motor system has been adopted for Yongin LRT and currently under construction. This paper covers the contents and technical base for main items of rolling stock, performance standard, carbody structure, bogie, electronic unit and brake equipment in order to implement linear induction motor LRT system according to local conditions.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.414-419
• /
• 2015

Recently, commercial ships and other specialized vessels with electric propulsion system employ variable speed induction motor as its prime mover. The wide application of electrical motors also includes being the main drive system in most industrial machineries. However, during its start-up, shutdown, and brake switch operation, excessive torque variation are generated. As such, flexible coupling are installed in order to reduce the transmitted torque fluctuation to the driven side. In this paper, the pulse torque generated by an variable speed induction motor was analyzed theoretically and through measurement of torsional vibration. Induction motor with inverter on marine propulsion system and industrial compressor were used as experimental subjects. The study confirmed that pulse torque are generated regardless of motor speed and interpreted as a vibration source of the whole system. Results presented herein can be adopted as the basis in future amendment of inspection classifying body regulations.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2010

Currently, vector control is used for speed control of trains because induction motor has high performance is installed in Electric railroad systems. Also, control of the induction motor is possible through various methods by developing inverters and control theory. Presently, rolling stocks which use the induction motor are possible to brake trains by using AC motor. Therefore model of motor block and induction motor is needed to adapt various methods. There is Variable Voltage Variable Frequency (VVVF) as the control method of the induction motor. The torque and speed is controlled in the VVVF. The propulsion system model in the electric railroad has many sub-systems. So, the analysis of performance of the speed control is very complex. In this paper, simulation models are suggested by using Matlab/Simulink in the speed control characteristic. On the basis of the simulation models, the response to disturbance input is analyzed about the load. Also, the current, speed and flux control model are proposed to analyze the speed control characteristic in the train propulsion system.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.116-127
• /
• 2021

In this paper, we propose simultaneous control which improve in transient state performance of mechanical parking facilities through simultaneous control of PLC and inverter. In conventional mechanical parking facilities, it is controlled only by PLC, and it is more likely to generate over-currents in induction motors, and the ride comfort is reduced due to wear and damage caused by friction on the brake pads, and the life is shortened. To improve this problems the application of control techniques through simultaneous control of PLC and inverter prevents over-currents in induction motors, protects brake pads, improves ride comfort, increases control and ensures safety. We verify its validity by applying the proposed control method via simultaneous control of PLC and inverter to a mechanical parking facility.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.1007-1012
• /
• 2002

In this paper, a regeneration inverter is proposed using 3-level inverter. Electric regeneration means regeneration brake in electric railway vehicles. Induction motors, generally used with railway vehicles, convert the electric energy to the movement energy when vehicle is running. When the vehicle stop, the induction motor convert the movement energy to the electric energy. Usually, this energy is used with another running vehicle in the same section. If there is no vehicle around when the regeneration is occurred, regeneration energy is consumed by heat energy with resistors. The proposed inverter is capable of reuse this regeneration energy in another place.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.2
• /
• pp.44-48
• /
• 2000

The high temperature superconducting bulk can be used as the rotor of an ac motor. This paper presents the fabrication and test results of a ac motor with HTS bulk rotor. The rotor of a conventional squirrel cage induction motor was replaced with cylinder type YBCO bulk. Height and outer diameter of the HTS bulk was 15mm and 46mm, respectively. Eddy current brake using aluminium disk was used to measure the torque of the HTS motor. No load test, locked rotor test and load test were performed to examine the characteristics of the HTS motor. Test results show the motor can rotate at synchronous speed without any special starting circuit. Maximum output power of the constructed HTS motor was 408W.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.281-285
• /
• 1990

Our N.C. sewing machine is a device that acts sewing automatically in reference to N.C. data made by data input device. Our N.C. sewing mechine is composed of induction motor that has electric clutch and brake, step motor that drives x-y table. Sewing area of our machine is 170 mm * 100 mm, maximum sewing speed is about 2000 spm, maximum stitch length 6.2 mm. In actual sewing, synchronization between motion of needle up-down and motion of x-y table is a critical factor. In this paper, technology about synchronization will be profoundly discussed.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.90-95
• /
• 2004

본 연구에서는 일반적으로 사용되고 있는 랜덤 수 발생 알고리즘인 LCG(Linear Congruential Generator)대신에 카오스 2중 텐트사상(Tent Mapping)에 의한 저 스위칭 소음 유도모터구동 시스템을 제안하였다. 2중 텐트사상에 의한 랜덤 수 발생을 위해 카오스 발생 영역인 $\lambda=0.99$에서의 2중 텐트사상의 분기도(Bifurcation Diagram)를 사용하였다. 카오스 랜덤수와 3상 기준 정현파는 80C196 마이크로 콘트롤러가 전담하고 있으며, 80C196으로부터 발생된 카오스 랜덤 수에 의하여 MAX038로부터 랜덤 주파수의 삼각파 캐리어가 발생된다. 기계적인 소음이 없는 ECB(Eddy current Brake)를 부하로 사용한 3상 유도모터 구동 장치를 제작하여 본 연구의 타당성을 입증하였다.