• 제목/요약/키워드: Bracket mural paintings

검색결과 3건 처리시간 0.015초

Material and Manufacturing Properties of Bracket Mural Paintings of Daeungjeon Hall in Gaeamsa Temple, Buan

  • Lee, Hwa Soo;Yu, Yeong Gyeong;Han, Kyeong-Soon
    • 보존과학회지
    • /
    • 제38권1호
    • /
    • pp.45-54
    • /
    • 2022
  • This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

내소사 대웅보전 포벽화 제작기법 연구 (Study on Manufacturing Techniques of Bracket Mural Paintings of Daeungbojeon Hall in Naesosa Temple)

  • 이화수;이나라;한규성
    • 보존과학회지
    • /
    • 제34권6호
    • /
    • pp.557-568
    • /
    • 2018
  • 내소사 대웅보전 포벽화에 대한 벽체 구조 및 재질특성 그리고 채색층에 대한 정밀분석을 통해 제작기법을 연구하였다. 벽체 골조는 외가지 구조이며, 벽체층과 마감층 그리고 채색층의 세 층위로 구성되어있다. 벽체를 구성하는 벽체층 및 마감층은 석영과 장석류 등 모래와 황토를 혼합하여 제작하였다. 벽체층은 중립사 이상 크기와 세립사 이하 크기가 약 0.8:9.2 비율이고, 내 외부 마감층은 각각 약 6:4 비율로 벽체층보다 중립사 이상의 모래 비율이 상대적으로 높게 나타났다. 채색층 정밀분석 결과, 뇌록을 사용하여 최대 $456.15{\mu}m$로 비교적 두꺼운 바탕칠층을 마련하였으며 그 위로 녹염동광 및 백토 그리고 산화철 계통의 안료를 사용하여 채색하였다. 연구결과, 토벽체와 채색층 제작기법은 현재까지 연구된 조선시대 사찰벽화 제작양식 범주에 속하는 것으로 확인되었다. 그러나 마감층 모래 함량이 높고 중벽층과 짚여물이 확인되지 않는 점 등은 내소사 대웅보전 포벽화 벽체가 지닌 구조 및 재질특성으로서, 이와 같은 결과는 향후 벽화 보존상태 평가 또는 보존처리 방안 마련에 주요 정보가 될 수 있다.

직지사 대웅전 포벽화 보존방안을 위한 과학적 조사 (Scientific Investigation for Conservation Methodology of Bracket Mural Paintings of Daeungjeon Hall in Jikjisa Temple)

  • 이화수;김설희;한경순
    • 보존과학회지
    • /
    • 제34권2호
    • /
    • pp.107-118
    • /
    • 2018
  • 직지사 대웅전 포벽화에 대한 보존상태 진단 및 재질분석 등 과학적 조사를 통해 벽화 보존방안 마련을 위한 연구를 실시하였다. 포벽화 보존상태 평가 결과, 채색층 열화 및 벽화면 오염 등의 손상이 큰 것으로 나타났으며, 벽체 균열 및 파손 그리고 층간 분리 등 벽체의 구조적 손상이 심화된 것으로 나타났다. 광학적 조사결과 밑그림 또는 덧칠의 흔적 등 채색층에서의 특이점은 확인되지 않았다. 벽화 별 초음파 탐상 속도는 표면 위치에 따라 낮게는 약 195.8 m/s부터 높게는 392.7 m/s까지 측정되어 위치에 따른 표면 물성을 비교할 수 있었으며, 적외선 열화상 촬영에서는 벽체 층간 분리 및 채색층 박리부위가 면밀하게 검출되어 손상에 대한 객관적인 파악이 가능하였다. 재질 분석 결과 벽체는 모래와 풍화토를 사용하여 제작한 것으로 확인되었으며, 벽체층은 모래와 세립사 이하 크기의 토양을 거의 5:5로 혼합하였고, 마감층은 중립사와 세립사를 약 6:4 비율로 혼합한 것으로 나타났다. 그러나 마감층의 경우 극세립사 이하 크기의 혼합비율이 벽체층에 비해 현저히 적은 것으로 나타났다. 직지사 대웅전 포벽화는 토벽체가 갖는 구조 특성과 함께 벽체층간 밀도 차이로 인해 벽체 파손과 층간 분리현상이 발생한 것으로 판단된다.