• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.635-641
• /
• 2010

In this paper, we propose an efficient public key broadcast encryption system which can also extend traitor trace and revoke system. Although the proposed system has limited collusion size, the ciphertext size in the system can be sublinear in the number of total users, the private key size is constant, the computational cost can be sublinear and it can support black-box tracing algorithm, therefore, our system can be an option to applications where reducing the ciphertext size, private key size is a top priority. Furthermore, we can also apply our system to military document broadcast system, because it has such an efficient measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1382-1391
• /
• 2022

White-box cryptography can respond to white-box attacks that can access and modify memory by safely hiding keys in the lookup table. However, because the size of lookup tables is large and the speed of encryption is slow, it is difficult to apply them to devices that require real-time while having limited resources, such as IoT(Internet of Things) devices. In this work, we propose a scheme for collecting short-length plaintexts and processing them at once, utilizing the characteristics that white-box ciphers process encryption on a lookup table size basis. As a result of comparing the proposed method, assuming that the table sizes of the Chow and XiaoLai schemes were 720KB(Kilobytes) and 18,000KB, respectively, memory usage reduced by about 29.9% and 1.24% on average in the Chow and XiaoLai schemes. The latency was decreased by about 3.36% and about 2.6% on average in the Chow and XiaoLai schemes, respectively, at a Traffic Load Rate of 15 Mbps(Mega bit per second) or higher.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.26-37
• /
• 2006

This study addresses the applicability of box fractal dimension, $D_B$, as an index of statistical homogeneity of fractured rock mass. The box-count method's capability in quantifying the combined effect of fracture density and size distribution is examined systematically. Total of 129 two-dimensional fracture configurations were generated based on different combinations of fracture size distribution and fracture density. $D_B$was calculated for the generated fracture network systems using the box-counting method. It was found that was standard deviation of trace length and fracture orientation have no effect on calculated $D_B$. The estimated $D_B$ was found to increase with increasing total density and/or mean trace length. To explore the field applicability of this study, the statistical homogeneity of fractured rock mass was investigated at the rock slope and the underground facility using the box-counting method as well as conventional contingency table analysis. The results obtained in this study clearly show that the methodologies given in this paper have the capability of determining the statistical homogeneity of fractured rock mass.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.363-374
• /
• 2023

A white-box environment refers to a situation where the internal information of an algorithm is disclosed. The AES white-box encryption was first announced in 2002, and in 2016, a side-channel analysis for white-box encryption called Differential Computation Analysis (DCA) was proposed. DCA analysis is a powerful side-channel attack technique that uses the memory information of white-box encryption as side-channel information to find the key. Although various countermeasure studies against DCA have been published domestically and internationally, there were no evaluated or analyzed results from experiments applying the hiding technique using dummy operations to DCA analysis. Therefore, in this paper, we insert LU T-shaped dummy operations into the WBC-AES algorithm proposed by S. Chow in 2002 and quantitatively evaluate the degree of change in DCA analysis response depending on the size of the dummy. Compared to the DCA analysis proposed in 2016, which recovers a total of 16 bytes of the key, the countermeasure proposed in this paper was unable to recover up to 11 bytes of the key as the size of the dummy decreased, resulting in a maximum decrease in attack performance of about 68.8%, which is about 31.2% lower than the existing attack performance. The countermeasure proposed in this paper confirms that the attack performance significantly decreases as smaller dummy sizes are inserted and can be applied in various fields.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.809-815
• /
• 2000

The box capacitor structure with HSG-Si described here reliably achieves a cell capacitance of 28fF with a cell area of a $0.4820\mum^2$ for 128Mbit DRAM. An HSG-Si formation technology with seeding method, which employs Si2H6 molecule irradiation and annealing, was applied for realizing 64Mbit and larger DRAMS. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous doped amorphous silicon electrodes. The HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors.The box capacitor structure with HSG-Si described here reliably achieves a cell capacitance of 28fF with a cell area of a $0.4820\mum^2$ for 128Mbit DRAM. An HSG-Si formation technology with seeding method, which employs Si2H6 molecule irradiation and annealing, was applied for realizing 64Mbit and larger DRAMS. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous doped amorphous silicon electrodes. The HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors.

• Geomechanics and Engineering
• /
• v.14 no.4
• /
• pp.387-398
• /
• 2018

The present study evaluates the interface shear strength between sand and different construction materials, namely steel and concrete, using direct shear test apparatus. The influence of surface roughness, mean size of sand particles, relative density of sand and size of the direct shear box on the interface shear behavior of sand with steel and concrete has been investigated. Test results show that the surface roughness of the construction materials significantly influences the interface shear strength. The peak and residual interface friction angles increase rapidly up to a particular value of surface roughness (critical surface roughness), beyond which the effect becomes negligible. At critical surface roughness, the peak and residual friction angles of the interfaces are 85-92% of the peak and residual internal friction angles of the sand. The particle size of sand (for morphologically identical sands) significantly influences the value of critical surface roughness. For the different roughness considered in the present study, both the peak and residual interaction coefficients lie in the range of 0.3-1. Moreover, the peak and residual interaction coefficients for all the interfaces considered are nearly identical, irrespective of the size of the direct shear box. The constitutive modeling of different interfaces followed the experimental investigation and it successfully predicted the pre-peak, peak and post peak interface shear response with reasonable accuracy. Moreover, the predicted stress-displacement relationship of different interfaces is in good agreement with the experimental results. The findings of the present study may also be applicable to other non-yielding interfaces having a similar range of roughness and sand properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.27-34
• /
• 2014

In this paper, we investigate the statistical correlation of the time series for temperature measured at the heat box in the automobile drying process. We show, in terms of the sample variance, that a significant non-linear correlation exists in the time series that consist of absolute temperature changes. To investigate further the non-linear correlation, we utilize the volatility, an important concept in the financial market, and induce volatility time series from absolute temperature changes. We analyze the time series of volatilities in terms of the de-trended fluctuation analysis (DFA), a method especially suitable for testing the long-range correlation of non-stationary data, from the correlation perspective. We uncover that the volatility exhibits a long-range correlation regardless of the window size. We also analyze the cross correlation between two (inlet and outlet) volatility time series to characterize any correlation between the two, and disclose the dependence of the correlation strength on the time lag. These results can contribute as important factors to the modeling of forecasting and management of the heat box's temperature.

• Journal of Korea Multimedia Society
• /
• v.20 no.8
• /
• pp.1271-1281
• /
• 2017

It is essential to collect and analyze target information around the vehicle for autonomous driving of the vehicle. Based on the analysis, environmental information such as location and direction should be analyzed in real time to control the vehicle. In particular, obstruction or cutting of objects in the image must be handled to provide accurate information about the vehicle environment and to facilitate safe operation. In this paper, we propose a method to simultaneously generate 2D and 3D bounding box proposals using LiDAR Edge generated by filtering LiDAR sensor information. We classify the classes of each proposal by connecting them with Region-based Fully-Covolutional Networks (R-FCN), which is an object classifier based on Deep Learning, which uses two-dimensional images as inputs. Each 3D box is rearranged by using the class label and the subcategory information of each class to finally complete the 3D bounding box corresponding to the object. Because 3D bounding boxes are created in 3D space, object information such as space coordinates and object size can be obtained at once, and 2D bounding boxes associated with 3D boxes do not have problems such as occlusion.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.447-456
• /
• 2006

In this study, a torsional test for U-type steel box girders was performed to observe the effects of the kind of panel for top lateral walateral bracings on the torsional behavior of the U-type steel girder system. For the structural tests, the test specimen with a two-thirds scale of the system actually constructed in the field was used. In the torsional test to observe the efects of top lateral bracings, the most economical arrangement of the top lateral bracing was found to be the panel width to length ratio of 1:1.5 with the inclined angle of $40^{\circ}$.

• Asia pacific journal of information systems
• /
• v.25 no.3
• /
• pp.563-578
• /
• 2015

Forecasting daily box-office performance is critical for planning the distribution of marketing resources, and by extension, maximizing profits. For certain movies, the number of viewers increases rapidly at the beginning of their theatrical run, and the increments slow down later. Other movies are not popular in the beginning, but the audience sizes grow rapidly afterward. Thus, the audience attendance of movies grow in different trajectories, which are influenced by various factors including marketing budget, distributors, directors, actors, and word of mouth. In this paper, we propose a method for predicting the daily performance trajectory of running movies based on the hierarchical linear model. More specifically, we focus on the effect of online word of mouth on the shape of the growth curves. We fitted the mean trajectory of the cumulative audience size as a cubic function of time, and allowed the intercept and slope to vary movie-to-movie. Moreover, we fitted the linear slope with a function of online word of mouth predictors to help determine the shape of the trajectories. Finally, we provide performance predictions for individual movies.