• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.3
• /
• pp.465-475
• /
• 2022

Due to the impact of COVID-19, people are paying attention to convenience and health, and the use of IoT devices to help them is increasing. In order to embed a lightweight security element in IoT devices that need to handle sensitive information even with limited resources, the development of a lightweight S-box is essential. Until 2021, it was common to develop a lightweight 4-bit S-box by a heuristic method, and to develop an extended structure or repeat the same operation for a larger size lightweight S-box. However, in January 2022, a paper that proposed a heuristic algorithm to find an 8-bit S-box with better differential uniformity and linearity than the S-box generated with an MISTY extended structure, although non-bijective, was published [1]. The heuristic algorithm proposed in this paper generates an S-box by adding AND operations one by one. Whenever an AND operation is added, they use a method that pre-removes the S-box for which the calculated differential uniformity does not reach the desired criterion. In this paper, we improve the performance of this heuristic algorithm. By increasing the amount of pre-removal using not only differential uniformity but also other differential property, and adding a process of calculating linearity for pre-removing, it is possible to satisfy not only differential security but also linear security.

• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.23-26
• /
• 2016

DC motor shafts have several defects such as double cut, deep scratch on surface, and defects in diameter and length. The deep scratches are due to collision among the other shafts. So the scratches are long and thin but their orientations are random. If the smallest enclosing box, i.e. oriented bounding box for a detective point group is found, then the size of the corresponding defect can be modeled as its diagonal length. This paper proposes an suface inspection algorithm for the DC motor shaft using the oriented bounding box. To evaluate the proposed algorithm, a test bed is made with a line scan CCD camera (4096 pixels/line) and two rollers mechanism to rotate the shaft. The experimental result on a pre-processed image with contrast streching algorithm, shows that the proposed algorithm sucessfully finds 150 surface defects and its computation time (0.291 msec) is enough fast for the requirement (4 seconds).

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.164-167
• /
• 2002

This paper presents the design of Rijndael crypto-processor with 128 bits, 192 bits and 256 bits key size. In October 2000 Rijndael cryptographic algorithm is selected as AES(Advanced Encryption Standard) by NIST(National Institute of Standards and Technology). Rijndael algorithm is strong in any known attacks. And it can be efficiently implemented in both hardware and software. We implement Rijndael algorithm in hardware, because hardware implementation gives more fast encryptioN/decryption speed and more physically secure. We implemented Rijndael algorithm for 128 bits, 192 bits and 256 bits key size with VHDL, synthesized with Synopsys, and simulated with ModelSim. This crypto-processor is implemented using on-the-fly key generation method and using lookup table for S-box/SI-box. And the order of Inverse Shift Row operation and Inverse Substitution operation is exchanged in decryption round operation of Rijndael algorithm. It brings about decrease of the total gate count. Crypto-processor implemented in these methods is applied to mobile systems and smart cards, because it has moderate gate count and high speed.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2035-2036
• /
• 2006

Most industrial robot have not load control box because of robot's weight and volume. A robot is connected to its control box by cables. and then there are a lot of problem for transfer, management and operation of robot. Now a day, A lot of control module are made small size by development of electronics part technology and control technology and they are developing as embedded and loading system. For that, control module and its servo system for a mobile robot is developed. they are small size in comparison with conventional products.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2001.07a
• /
• pp.173-180
• /
• 2001

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.147-154
• /
• 1999

This study was performed to survey the exchange of frames on 83 persons. We investigated frame size, frame type, binocular prism effect etc. 80.4% among motives of frame-exchanges was a damage or corrosion. The type of frames was round-like 62.4% and 37.6% square-like. The size of frames was $49{\Box}18$ and vertical length 33mm on old-frames, $47{\Box}17$ and 31mm on new-frames. The scope of axis variation was average +3.20~3.80. According to estimation by the rule of RAL-RG 915, the inappropriate horizontal prism effect of new spectacles was 42.2%, more than 38.5% on old spectacles. The inappropriate vertical prism effect was 24.1% on old, 33.7% on new spectacles.

• The KIPS Transactions:PartB
• /
• v.18B no.4
• /
• pp.221-230
• /
• 2011

Digital comic images are one of popular contents on the Internet. Usually, they are scanned from comic books by digital scanners. Without post-processing, they may have different sizes, skews and margins other than contents at the boundary. To normalize the size of their contents without the skews and margins is an important step in comic image analysis and application such as content-based comic image retrieval system. In this paper, we propose a method to detect a box frame in comic images by extracting of line segments using the gradient Radon transform. The box frame in comic images is the maximum rectangle which consists of contents without margins. We use the detected box frame to normalize the size of comic images and to make them no skew. In addition, the proposed method is implemented by OpenCL to speed up the detection of the line segments. Experimental results show that our proposed method effectively detects the box frame in comic images.

• YAKHAK HOEJI
• /
• v.12 no.3_4
• /
• pp.41-49
• /
• 1968

The optimum reaction conditions for the preparation of the precipitated calcium carbonate of an average particle size of 0.05.mu. in diameter was set in which the Box-Wilson Plan was applied. The reaction conditions are as follows; 1) concentration of milk of lime; 6.56% w/w 2) temperature; 14.24.deg. C #) velocity of carbon dioxide introducing; 1.95l/min. The crystal form was found that of calcite in X-ray diffraction analysis. The particle size was determined by the sedimentation volume measurement. The shape was identified by the elctron micro-diffraction pattern and the electron microscopic photographs.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.27-34
• /
• 1995

Elastic and in-elastic buckling stress analyses are executed by the semi-analytical finite strip method to study the effect of the longitudinal stiffener on the web of box girders. The simple analysis procedure is based on the assumption that the vertical stiffeners has the rigidity enough to force nil deflection line on the web panel so that the boundary condition may be regarded as a hinge. The provisions on the longitudinal stiffeners in plate girders of the Korean Standard Highway Bridge Specifications(1992) are investigated through comparison with the results obtained for various web stiffener size of box girders of the medium span length bridges.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.151-159
• /
• 2012

This paper analyzes the consumers' preference for packaged apple and derives the measures to vitalize the distribution of packaged apple. To do this, survey was conducted for consumers in large cities, Seoul, Busan, and Daegu to observe their purchasing behavior and satisfaction both for packaged and unpackaged apple. Survey was focused to how they are satisfied with several attributes of package such as size, appearance, content, material, and label. On the basis of the survey results, the values of the package attributes were estimated. Survey results show that consumers tend to buy unpackaged apple rather than packaged apple. About 34 percent out of 313 respondents have ever purchased apple packed with paper box while only 10.5 percent have an experience to buy packaged apple with transparent box. Most respondents answered they preferred the package of five to six apples and 1.3 kilograms most. They preferred mid or large size apple. Estimation of the values of the package attributes using the conjoint analysis shows that consumers are giving the highest value to the price of packing material. It means that consumers are reluctant to the extra payment resulted from packing the apple. Therefore, the efforts to reduce the cost of packing apple should be made steadily. In order to vitalize the distribution of small packaged apple, the package should contain high quality apple with high sugar content, proper size, good appearance, and so on. And it needs to be promoted to the consumers that small packaged apple are not inferior to apple packed with paper box.