• Journal of KIISE:Software and Applications
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2006

As the size of software is getting huge, it has been impossible for testers to test all of source coed. Therefore, the method which uses information of requirements for testing has been researched and accepted. Although there are a lot of test methods based on requirement specification, each method has a different approach and coverage. So we should consider their various approach and coverage in the stage of test planning. This paper presents the empirical comparison and the result by applying various black-box testing methods to software system. For this experiment we studied five black-box testing methods including UML based specification technique. We applied the five testing methods to application system and evaluated the coverage of extracted test case.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.4
• /
• pp.39-46
• /
• 2004

This experiment was carried out to study on the effect of surface coating on thermal insulation of farm structures to improve thermal resistance and reflective effect of solar radiation. Nine different types of experimental specimen were compared in the temperature variations of inside and outside; A, B, C, D. E and F types are box container and G, H and I types are drum container. The size of these containers is $1,500{\times}2,000{\times}2,500$ mm and ${\varphi}$ $280{\times}330$ mm, respectively. Specimen of 3-type box(A, B, C) is galvanized steel sheet of thickness 0.45 mm. D, E and F types are sandwich panel of the thickness 50 mm inserted with urethane, glass wool and polystyrene form, respectively. G, H and I types are paint pot using in general. The surface of A. D, E, F and I types didn't any treatment, B, C and G types were treated with thermal insulation coating on the outside surface(B, G) or the inside and outside surface(C). And H type was treated with water paint coating on the only outside surface. In general, the experimental results showed the following tendencies; In case of A, B and C types. it was found that the thermal insulation effect of types coated with thermal insulation coating was improved remarkably than that of no treatment. And the thermal insulation effect between steel sheet and sandwich panel type was nearly similar There was not a significant difference of thermal insulation effect between thermal insulation coating and water paint coating. In time of drum container filled with rough rice, The difference of heat transfer tendency and temperature variation among surface treatments was nearly similar that of box types of galvanized steel sheet. And there was time lag about 6 hours between the temperature of middle part of rice and that of inside or outside surface.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.83-92
• /
• 2014

We examined the annual film distribution portfolio of a Korean film distributor, Lotte Entertainment, investigating how the company puts big-budget films and low-budget movies together. As a result, the distributor was found to invest more than 80% of its whole budget in producing medium-size movies. The more successful box office, however, was witnessed from big-budget films that the company spent more than 6 billion Korean wons. With respect to genre, comedy and drama were the most and second-most frequently produced. However, Those two genres were not the most successful genres in the box office. Korean movie-goers favored actions and thriller the most and second most. Comedy took only the third place of the Korean box office, signifying a discord between the portfolio and the Korean box office.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.195-203
• /
• 2006

The crossing construction under railroad have two methods which are cut and cover and trenchless method. first, cut and cover method is an extremely limited method concerning non-running time. Whereas, trenchless method is free from restriction such as train speed and running time, and has the strong points of safe and rapid construction. Front Jacking method, one of the trenchless methods, is frequently applied recently due to its stability during construction and vantage of assuring schedule reliability. The procedure is that after minimizing interlocking friction with structure and earth pressure due to jacking the small steel tube, pulling the precast box manufactured at the field in the ground using PC strand and hydraulic Jack. This method is able to be applied regardless of section size and length of box and condition of ground. And that is also pro-environmental. This paper presents the case of Daejeon E. W. perforate Road Project applied with the Front Jacking method.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.305-308
• /
• 2012

The box tree pyralid, Glyphodes perspectalis, was reared on an artificial diet based on dried powder of box tree leaves, Buxus microphylla var. koreana, and INSECTA F-II (Nihon Nosan Co., Ltd) at a ratio of 3:7 (w:w) and analyzed in their developmental characteristics from $1^{st}$ to $4^{th}$ generation. The developmental period of larva reared on artificial diet was longer than that of larva reared on host plant. Significant difference in larval period was also observed between $1^{st}$ and other generation groups. Pupation rate was the highest in $4^{th}$ generation followed by $3^{rd}$, $2^{nd}$, $1^{st}$ and host plant group. Significant difference in pupal period was noted between $1^{st}$ and 3rd generation group. Emergence rate was the highest in $4^{th}$ generation group followed by $3^{rd}$, host plant, $1^{st}$ and $2^{nd}$ generation group. There is a significant difference in male and female size between $1^{st}$ and $4^{th}$ generation group. Our result indicated that stable rearing of box tree pyralid through the year is possible by artificial diet, and the best adaptation to artificial diet was achieved at $4^{th}$ generation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.30-40
• /
• 2010

The hard disk is one of the most frequently used storage in IPTV sep-top box. It has large storage capacity and provides fast I/O speed compared to its price whereas it causes high power consumption due to mechanical characteristics of spindle motor. In order to play streaming data in the set-top box, spindle motor of hard disk keeps active mode and it causes high power consumption. In this paper, We propose an offset-buffering and multi-mode spin-down method to reduce power consumption for streaming data playback. The offset-buffering inspects the user's viewing pattern and performs buffering based on the analysis of viewing pattern. So, it can maintain the status of spindle motor as idle mode for long time. Besides, it can reduce power consumption by spinning down according to offset-buffer size. The experimental result shows that proposed offset-buffering and multi mode spin-down method is about 28.3% and 12.5% lower than the full-Buffering method in terms of the power consumption and spin-down frequency, respectively.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.45-53
• /
• 2012

Hollows are easily made and bearing capacity is lowered near underground structures of concrete pavement because of poor compaction and long term settlement of the ground. Distresses occur and lifespan is shortened because of larger stress induced by external loadings expected than that in the design. In this paper, the distresses of the concrete pavement slab over box culverts were investigated at the Korea Expressway Corporation(KEC) test road. The transverse cracking of the slabs over the culverts was compared between up and down lines with different soil cover depth. The box culvert without soil cover and concrete pavement were modeled and analyzed by the finite element method(FEM) to verify the transverse cracking at the test road. Wheel loading was applied after self weight of the pavement and temperature gradient of the concrete slab at Yeojoo, Gyeonggi where the test road is located were considered. Positions of maximum tensile stress and corresponding positions of the wheel loading were found for each loading combination. Joint position minimizing the maximum tensile stress was found and optimal slab length over the culverts with diverse size were suggested.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.221-232
• /
• 1996

An abrasive, calcium hydrogen phosphate dihydrate (DCPD), was synthesized in a Box-wilson experimental design by reactions between phosphoric acid and milk of lime, and calcium chloride and sodium phosphate solutions, and stabilized with TSPP and TMP. The optimum conditions for preparation of DCPD from phosphoric acid with milk of lime were such as; reaction temp.; $51.9^{\circ}C$, conc. of lime; 25.9%, conc. of phosphoric acd; 77.9%, drying temp.; $60.2^{\circ}C$ and final pH; 6.46. The physico-chemical and pharmaceutical properties of DCPD were showed as follows: glycerin absorption value(68 ml/100g), whiteness(99.5%), particle size(10.9 nm), pH(7.8), and set test(pass). XRD and SEM of DCPD indicated a monoclinic system crystallographically. $N_2$ adsorption isotherm curve by BET showed non porous type II form. The micromeritic parameters of DCPD showed that surface area was $3.27{\sim}4.6\;cm^{2}/g$ and pore volume, pore area and pore radius were negligible. The rheogram of the toothpaste containing DCPD showed pseudoplastic flow with yield value of 321, and thixotropic behavior forming hysteresis loop. These results meet the requirements as abrasive standard, and sythesized DCPD is expected as a good dental abrasive such as a high quality grade in practice.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.77-87
• /
• 2013

A present LSD (limited state design) code for temperature load in the domestic bridge design has applied a uniform standard for various bridge types. In this study, in order to calculate the effective temperature, a specimen of steel box girder bridge section with real size dimension was manufactured. For a year, the temperature data were measured at the 18 point in steel deck of steel box girder bridges specimen. Effective temperature within the cross section according to atmospheric temperature was calculated by this experiment data. The analyzed results were very similar correlation when compared with the effective temperature of the Euro Code. Therefore, the effective temperature which calculated based on the present data could be used as the basic data in order to present to the appropriate design criteria for the thermal loads on the domestic bridge design.

• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.657-678
• /
• 2016

This study deals with the effect of online word-of-mouth (OWOM) variables on the box office. From the result of statistical analysis on 276 films with audiences of more than five hundred thousand released in the Korea from 2012 to 2015, it can be seen that the variables showing the size of OWOM (such as the number of the portal movie rater, blog, and news after release) are associated more with the box office than the portal movie rating showing the direction of OWOM as well as variables showing the inherent properties of the film such as grade, nationality, release month, release season, directors, actors, and distributors.