• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.962-968
• /
• 2013

화석연료의 고갈에 따른 연료유의 가격상승과 세계온난화에 따른 그린하우스가스(Green House Gas, GHG)등의 문제가 주목받고 있다. 이러한 이유로 해상운송사업은 연료의 소비를 줄이고 환경보호를 위해 온실가스를 줄이기 위한 친환경선박(Green ship) 기술에 대하여 관심을 보이고 있다. 선박의 전력시스템은 안전한 운항을 위한 가장 주요한 요소 중 하나이다. 이러한 이유로 선박 설계에 있어 대부분의 선박은 바우 스러스터(Bow thruster, B/T), 크레인 등의 장비사용에 따른 피크부하로 인하여 큰 용량의 발전기를 사용하고 있다. 이러한 이유로 선박의 항해에 있어 대부분의 선박의 발전기는 저부하 운전구간에서 운전되게 된다. 50%또는 그 이하의 운전율인 저부하 운전에서는 발전기의 운전효율이 저하하게 되어 많은 연료유를 소비하며 발전기 수명에 좋지 않은 영향을 미치게 된다. 본 논문에서는 입출항이 비교적 많이 있는 컨테이너선박에 이차전지 적용방안에 대하여 연구하였다. 그 결과 이차전지를 적용하여 항해 중 발전기 운전율을 높이므로 연료 소비를 줄일 수 있음을 확인하였다.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.10-18
• /
• 2022

선박을 통한 세계교역 증가에 따라 침입외래종(Invasive Alien Species, IAS)로 인한 해양생태계파괴 및 사회경제적 피해가 지속적으로 증가하고 있다. 특히 선체표면과 틈새구역(Niche Area)에 부착된 해양생물의 이동은 외래종침입 문제뿐만 아니라 선박의 마찰저항을 증가시켜 운항효율감소 및 온실가스배출 증가를 유발한다. 국제해사기구(IMO)는 최근 선체부착생물 통제 및 관리에 대한 지침 개정작업에 착수하였고 뉴질랜드와 미국 캘리포니아는 이미 자국법으로 선체부착생물 관리를 규제하고 있다. 본 논문에서는 국내에 입항하는 국제운항선 5척을 대상으로 선체부착생물 관리현황과 생물부착현황을 조사하였고, 생물부착종과 피도(Coverage)를 분석하여 생물부착단계 등급(Level of Fouling, LoF rank)을 평가하였다. 모든 선박에서 대형부착생물(Macrofouling)이 관찰되었고 특히 선수 스러스터(Bow thruster), 빌지킬(Bilge keels) 및 해수 흡입구 격자(Sea-chest gratings)와 같은 틈새구역의 대형개체(Macro organisms) 부착이 심각한 수준으로 나타났다. 본 연구에서는 국내 선체부착생물 관리방안을 제시하고, 실선대상 생물부착단계등급 적용 및 검사(Inspection) 방법 개선방안을 제안하고자 하였다.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.265-287
• /
• 2016

The change of the global performance of a turret-moored FPSO (Floating Production Storage Offloading) with DP (Dynamic Positioning) control is simulated, analyzed, and compared for two different internal turret location cases; bow and midship. Both collinear and non-collinear 100-yr GOM (Gulf of Mexico) storm environments and three cases (mooring-only, with DP position control, with DP position+heading control) are considered. The horizontal trajectory, 6DOF (degree of freedom) motions, fairlead mooring and riser tension, and fuel consumptions are compared. The PID (Proportional-Integral-Derivative) controller based on LQR (linear quadratic regulator) theory and the thrust-allocation algorithm which is based on the penalty optimization theory are implemented in the fully-coupled time-domain hull-mooring-riser-DP simulation program. Both in collinear and non-collinear 100-yr WWC (wind-wave-current) environments, the advantage of mid-ship turret is demonstrated by the significant reduction in heave at the turret location due to the minimal coupling with pitch mode, which is beneficial to mooring and riser design. However, in the non-collinear WWC environment, the mid-turret case exhibits unfavorable weathervaning characteristics, which can be reduced by employing DP position and heading controls as demonstrated in the present case studies. The present study also reveals the plausible cause of the failure of mid-turret Gryphon Alpha FPSO in milder environment than its survival condition.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.345-352
• /
• 2020

This study aims to investigate the crabbing motion of the research vessel "NARA" by full-scale maneuvering trials. The crabbing test method refers to ITTC recommended procedures and guidelines. In order to minimize the fluctuation of the heading angle due to the external force acting on the hull during the pure lateral motion, the tests are conducted using the dynamic positioning system applied to the ship. The test results are analyzed by applying a low-pass filter to remove the noise included in the measurement data. Three conditions are set to define the steady state of crabbing motion. The index to be derived from the crabbing test is quantitatively presented. The ship is confirmed to be capable of the lateral motion of up to 0.844m/s in Beaufort 3.

• 한국해양공학회지
• /
• 제30권5호
• /
• pp.400-404
• /
• 2016

This paper presents experimental results for the vibration characteristics of the small unmanned underwater vehicle (UUV) OPKO 300, which was designed and manufactured by Daewoo ship and Marine Engineering Ltd. The autonomy of UUVs has led to an increase in their use in scientific, military, and commercial areas because their autonomy makes it possible for UUVs to be utilized instead of humans in hazardous missions such as mine countermeasure missions (MCM). Since it is impossible to use devices based on electromagnetic waves to gather information in an underwater environment, only sonar systems, which use sound waves, can be used in underwater environments, and their performance can strongly affect the autonomy of a UUV. Since a thruster system, which combines a motor and propeller in a single structure, is widely used as the propulsion system of a UUV and is mounted on the outside of a UUV’s stern, it can generate vibration, which can be transferred throughout the shell of the UUV from its stern to its bow. The transferred vibration can affect the performance of various sonar systems such as side-scan sonar or forward-looking sonar. Therefore, it is necessary to estimate the effect of the transferred vibration of the UUV on the sonar systems. Even if various numerical methods were used to analyze the vibration problem of a UUV, it would be hard to predict the vibration phenomena of a UUV at the initial design stage. In this work, an experimental study using OKPO 300 and an impact hammer was carried out to analyze the vibration feature of a small real UUV in the air. The frequency response function of the vibration based on the experimental results is presented.