• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.286-290
• /
• 2018

PURPOSE. Conventional resin-bonded fixed partial dentures (RBFPDs) are usually made with a two-retainer design. Unlike conventional RBFPDs, cantilever resin-bonded fixed partial dentures (Cantilever RBFPDs) are, for their part, made with a single-retainer design. The aim of this study was to compare the effect of tooth surface preparation on the bond strength of zirconia cantilever single-retainer RBFPDs. The objective is to evaluate the shear bond strength of these single-retainer RBFPDs bonded on 3 different amount of tooth surface preparation. MATERIALS AND METHODS. Thirty extracted bovine incisors were categorized to 3 groups (n=10), with different amounts of tooth surface preparations. Teeth were restored with single-retainer RBFPDs with different retainer surfaces: large retainer of $32mm^2$; medium retainer of $22mm^2$; no retainer and only a proximal connecting box of $12mm^2$. All RBFPDs were made of zirconia and were bonded using an adhesive system without adhesive capacity. Shear forces were applied to these restorations until debonding. RESULTS. Mean shear bond strength values for the groups I, II, and II were $2.39{\pm}0.53MPa$, $3.13{\pm}0.69MPa$, and $5.40{\pm}0.96MPa$, respectively. Statistical analyses were performed using a one-way ANOVA test with Bonferroni post-hoc test, at a significance level of 0.001. Failure modes were observed and showed a 100% adhesive fracture. CONCLUSION. It can be concluded that the preparation of large tooth surface preparation might be irrelevant. For zirconia single-retainer RBFPD, only the preparation of a proximal connecting box seems to be a reliable and minimally invasive approach. The differences are statistically significant.

• Journal of dental hygiene science
• /
• v.23 no.3
• /
• pp.236-244
• /
• 2023

Background: The size of the tooth whitening market and toothpaste market is increasing worldwide. The purpose of this in vitro study is to confirm and compare the coffee stain removal effects of commercial whitening toothpaste in sound and demineralized teeth, respectively. Methods: A total of 112 flat permanent bovine teeth specimens were manufactured. Half of the surface of the specimen was coated with an acid-resistant varnish and deposited in an artificial demineralizing solution for 65 hours. The varnish applied to half of the specimen was removed and deposited in a coffee solution for 96 hours to induce coloring. Two control and five experimental group toothpastes for teeth whitening were selected and the main components were investigated. Toothbrushing was performed 50, 100, and 150 times for each toothpaste group. A total of four images were obtained: before the start and after 50, 100, and 150 times of brushing to obtain the lightness (L^*) values of the sound and the demineralized tooth surfaces. The difference in the average value between toothpaste groups at each treatment period was analyzed by one-way ANOVA. The difference in the L^* average value according to the number of the brushing was analyzed by repeated measure ANOVA. Results: All toothpastes in the seven groups contained abrasive agents and had different ingredients for each product. Compared to before brushing, the L^* value changed significantly in all toothpaste groups after brushing 50 times (p<0.05). This was common in both the sound and demineralized teeth surfaces. Demineralized teeth had significantly lower L^* values at all brushing times than that in sound teeth (p<0.05). Conclusion: The effect of whitening teeth was different for each toothpaste. Demineralized teeth were more likely to cause coloration than sound teeth, and the coloration was not removed well.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.803-814
• /
• 2000

Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, biological mediators. Platelet Rich Plasma have been reported as a biological mediator which regulate activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the possibility of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were PRP plus bovine bone and bovine bone only. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus bovine bone group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 4 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during early stage of periodontal tissue regeneration.

• Journal of Periodontal and Implant Science
• /
• v.31 no.2
• /
• pp.437-449
• /
• 2001

The socket preservation procedure was a simple and effective technique, and has better prognosis for implantation. The socket preservation usually used barrier membrane in combination with/without alloplastic bone materials. A recently study had shown that a regenerative therapy to tooth extraction utilizing growth factors made better results. Platelet-rich plasma was clinically easy method that acquired the growth factors, and is known that accelerated new bone formation and mineralization of bone graft materials. The purpose of this study was to evaluate clinical and histopathologic results which occur following socket preservations using platelet-rich plasma and bovine bone powder. Twelve patients who required extraction of one or more teeth for implantation at the department of periodontics in Dankook University Dental Hospital were selected. Extraction sockets were treated by using platelet-rich plasma and bovine bone powder. 3 months later, we observed clinical and histopathological results as follows: 1. Internal vertical measurement was an average of 7.33mm preoperatively and statistically significantly decreased to an average of 1.42mm postoperatively(p<0.05). 2. External vertical measurement was an average of 3.33mm preoperatively and decreased to an average of 2.75mm postoperatively; therefore there was no significant difference. 3. Horizontal measurement was an average of 7.75mm preoperatively and statistically decreased to an average of 6.08mm postoperatively(p<0.05). 4. Osteocyte-like cells and new bone formation connected with bovine bone grafts were observed in histopathologic examination. This study implied that platelet-rich plasma and bovine bone powder grafts were effective treatment for socket preservation and regeneration of severe bony defect made by implantation failure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2523-2529
• /
• 2009

The purpose of this study was to observe the demineralization effects of children's range beverage on bovine enamel. 15 bovine teeth without dental caries were divided into 4 experimental groups (n=12) and control group (n=3). All samples immersed in beverages maintained 48 hours by $37^{\circ}C$ in incubate respectively. The surface microhardness values(${\Delta}VHN$) between before and after 48 hours treatment decreased and DIGNOdent value increased because enamel surface were corroded by experimentation beverage. Especially, there was statistical significantly difference in the carbonated drink. Morphological changes by scanning electron microscope were indicated that children's range beverage cause significant enamel demineralization effects on bovine tooth surface among five beverages.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.729-736
• /
• 2008

Purpose: Anterior ridge defect after tooth extraction results in unfavorable appearance. Ridge augmentation procedures should be preceded by careful surgical-prosthetic treatment planning, and various techniques can be used in anterior ridge augmentation. Materials and Methods: Three patients showed deformed ridges after tooth extraction. Three different techniques ; onlay-interpositional connective tissue graft; bovine hydroxyapatite graft with free connective tissue graft; bovine hydroxyapatite graft with resorbable collagen membrane following free connective tissue graft; were used for anterior ridge augmentation. Result: Soft tissue graft can be used in small amount of ridge defect, hard tissue graft combined with soft tissue graft can be used in large amount of ridge defect. After ridge augmentation, about three months of healing period, augmented tissue was stabilized. The final restoration was initiated after this healing period, and the tissue form was maintained stable. Conclusion: Careful diagnosis and surgical-prosthetic treatment planning with joint consultation prior to surgery should be performed in order to attain an optimal esthetic results.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2017

Objectives: The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium disilicate glass ceramic. Materials and Methods: The specimens (dimension: $2mm{\times}2mm{\times}25mm$) of the composite resin, lithium disilicate glass ceramic, and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) were prepared. These were then divided into nine groups: three non-luting groups, three non-adhesive luting groups, and three adhesive luting groups, for each restorative material. In the non-luting groups, specimens were placed on the bovine tooth without any luting agents. In the non-adhesive luting groups, only zinc phosphate cement was used for luting the specimen to the bovine tooth. In the adhesive luting groups, specimens were pretreated, and the adhesive luting procedure was performed using a self-adhesive resin cement. For all the groups, a flexural test was performed using universal testing machine, in which the fracture resistance was measured by recording the force at which the specimen was fractured. Results: The fracture resistance after adhesive luting increased by approximately 29% in the case of the composite resin, 26% in the case of the lithium disilicate glass ceramic, and only 2% in the case of Y-TZP as compared to non-adhesive luting. Conclusions: The fracture resistance of Y-TZP did not increased significantly after adhesive luting as compared to that of the composite resin and the lithium disilicate glass ceramic.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.377-383
• /
• 2018

Objective: This study was performed to investigate the effects of external tooth bleaching with flouridation on the appearance of white spot lesions (WSLs) in vitro. Methods: In total, 125 bracket-bonded bovine incisor enamel blocks with artificial WSLs were randomly divided into a control group and four treatment groups (home bleaching, home bleaching + fluoridation, in-office bleaching, and in-office bleaching + fluoridation). A spectroradiometer (SR) and digital images (DIs) were used to evaluate colorimetric parameters (Commission Internationale l'Eclairage $L^*a^*b^*$) for all specimens. Color measurements were obtained before WSL formation (T1), after WSL formation (T2), and after completion of the external tooth bleaching treatment (T3). Results: The SRbased color change after bleaching was significantly greater in the treatment groups than in the control group (p < 0.05). SR-based lightness ($L^*$) and redgreen ($a^*$) values were significantly higher at T2 than at T1 (p < 0.001), with no significant changes in yellow-blue ($b^*$) values. At T3, SR-based $L^*$ values had increased while $a^*$ and $b^*$ values had decreased in the treatment groups (p < 0.001). The DI-based color difference between the sound enamel and WSL areas (DE*DI) increased significantly from T1 to T2 in all groups (p < 0.001) and significantly decreased from T2 to T3 in the treatment groups (p < 0.001). No significant differences in ${\Delta}E^*DI$ at T3 were shown between the four treatment groups (p > 0.05). Conclusions: The findings of this study suggested that external tooth bleaching with fluoridation can alleviate the conspicuity of WSLs.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.229-240
• /
• 2008

Animal mucins have structural characteristics similar to human salivary mucins. Animal mucins have been regarded as suitable substances for saliva substitutes. Since animal mucin molecules in saliva substitutes and host-derived antimicrobial salivary molecules exist simultaneously in whole saliva and the pellicles of patients with dry mouth, interactions may occur between these molecules. The purpose of this study was to investigate the influence of animal mucins on peroxidase activity in solution and on the surface of hydroxyapatite(HA) surfaces. The effects of animal mucins on peroxidase activity were examined by incubating porcine gastric mucin(PGM) or bovine submaxillary mucin (BSM) with either bovine lactoperoxidase(bLPO) or saliva samples. For solid-phase assays, immobilized animal mucins or peroxidase on three different HA surfaces(HA beads, HA disc, and bovine tooth) were used. Peroxidase activity was determined with an NbsSCN assay. The obtained results were as follows: 1. PGM enhanced the enzymatic activity of bLPO in solution phase. PGM did not affect the enzymatic activity of peroxidase in saliva sample(POS). 2. BSM did not affect the enzymatic activities of both bLPO and POS in solution phase. 3. HA-adsorbed PGM increased subsequent bLPO adsorption in all three HA phases. The activity of POS was increased on both the HA beads and bovine tooth. 4. The peroxidase activities on the HA beads and disc were increased when the HA surfaces were exposed to a mixture of bLPO and PGM. 5. The binding affinity of bLPO to PGM was greater than that of bLPO to BSM. Collectively, our results suggest that animal mucins affects the enzymatic activity of peroxidase on the HA surfaces as well as in solution. Saliva substitutes containing animal mucins may affect the function of antimicrobial components in natural saliva and saliva substitutes.