• 제목/요약/키워드: Boundary extraction

검색결과 306건 처리시간 0.026초

특징 영역 추출을 통한 내용 기반 영상 검색 (Content-based Image Retrieval by Extraction of Specific Region)

  • 이근섭;정승도;조정원;최병욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
    • /
    • pp.77-80
    • /
    • 2001
  • In general, the informations of the inner image that user interested in are limited to a special domain. In this paper, as using Wavelet Transform for dividing image into high frequency and low frequency, We can separate foreground including many data. After calculating object boundary of separated part, We extract special features using Color Coherence Vector. According to results of this experiment, the method of comparing data extracting foreground features is more effective than comparing data extracting features of entire image when we extract the image user interested in.

  • PDF

최적화 기법에 의한 다결정 TFT(Thin Film Transistor)의 매개 변수 추출 (The Parameters Extraction in Poly TFT Using Optimization Technique)

  • 김홍배;손상희;박용헌
    • 대한전기학회논문지
    • /
    • 제40권6호
    • /
    • pp.582-589
    • /
    • 1991
  • We used Cd Se as the semiconductor to analyze the Poly-TFT. Cd Se TFT is fabricated by the vacuum evaporation method and the characteristics curves of the current-voltage are obtained using the results of measurement of Cd Se TFT devices. Employing least square method and Rosenbrock algorithm, we can extract the device parameters(grain boundary mobility, trap density). The current-voltage relations calculated by extracted parameters are in good agreement with experimental results.

  • PDF

밝기 및 움직임 정보에 기반한 시공간 영상 분할 (Spatio-Temporal Image Segmentation Based on Intensity and Motion Information)

  • 최재각;이시웅김성대
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.871-874
    • /
    • 1998
  • This paper presents a new morphological spatio-temporal segmentation algorithm. The algorithm incorporates intensity and motion information simultaneously, and uses morphological tools such as morphological filters and watershed algorithm. The procedure toward complete segmetnation consists of three steps: joint marker extraction, boundary decision, and motion-based region fusion. By incorporating spatial and temporal information simultaneously, we can obtain visually meaningful segmentation results. Simulation results demonstrates the efficiency of the proposed method.

  • PDF

스네이크를 이용한 심근 SPECT short-axis 영상의 내외벽에 대한 경계선 추출 (Boundary extraction about endocardial and epicardial of myocardial SPECT short-axis images using snakes)

  • 김령주;김영철;손병환;이병일;최흥국
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2001년도 추계학술발표논문집
    • /
    • pp.111-114
    • /
    • 2001
  • 게이트 심근 SPECT 영상은 좌심실 구혈률(EF), 확장기말 부피(end-diastolic volume), 수축기말(end-systolic volume)부피 등의 지표로 심근의 기능을 평가하는데 널리 이용된다. 이러한 지표들을 구하기 위해서는 심근 안팎의 경계선을 추출해야 한다. 본 연구는 좌심실의 SPECT short-axis 영상에서 전처리 과정을 거친 영상을 Hough Transform을 이용하여 초기점 설정한 후 심실 내외벽의 경계선을 추출하기 위해 Williams 가 제안한 Active Contour Model(snakes)을 이용하여 심근의 경계선을 자동으로 추출하였다.

  • PDF

LIDAR 포인트 cloud에서 분리된 포인트 군집의 윤곽 포인트 추출에 관한 연구 (A study on the extraction of boundary points of point group segmented from LIDAR point cloud)

  • 한수희;이정호;유기윤;김용일
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 춘계학술대회 논문집
    • /
    • pp.148-152
    • /
    • 2007
  • 본 연구에서는 LIDAR 포인트 자료로부터 분리된 포인트 군집의 윤곽 포인트 추출을 위하여,가상격자를 이용한 검색 영역의 제한을 통한 윤곽 포인트 추출 방식을 제안하였으며 성능을 평가하기 위해 보편적으로 사용되는 TIN을 이용한 방식과 비교하였다. 실제 건물 포인트 자료에 대하여 적용한 결과 TIN을 이용한 방식보다 빠른 처리가 가능하며 시각적인 평가를 통해 결과물의 품질 면에서도 두 가지 방식이 거의 유사함을 확인할 수 있었다.

  • PDF

임의 시점 영상 합성을 위한 깊이 정보 추출 기법 (Depth Information Extraction Technique for Arbitrary Viewpoint Image Synthesis)

  • 박남준;이제호;권용무;박상희
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1997년도 학술대회
    • /
    • pp.161-164
    • /
    • 1997
  • 본 논문에서는 임의 시점 영상 합성을 위한 깊이 정보 추출에 관한 방법을 제안한다. 깊이 정보의 추출을 위한 방법으로서 기존의 MBS(Multiple-Baseline Stereo) 방법의 깊이 맵의 경계선 연장(boundary overreach) 문제를 감소시키며 처리 시간을 개선하는 방법으로서 계층적 방법인 MR-MBS(Multi-Resolution MBS) 방법을 제시한다. 또한 MBS 방법에서 고려하지 않고 있는 폐색 영역에 대한 적절한 처리 방법을 제시한다.

  • PDF

능동 윤곽선 모델을 이용한 경계선 추출과 다이나믹 프로그래밍 (A Boundary Extraction Method Based on Active Contour Model and Dynamic Programming)

  • 김령주;김영철;최흥국
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2002년도 춘계학술발표논문집(상)
    • /
    • pp.282-285
    • /
    • 2002
  • 의료영상에서 윤곽선의 추출은 관심영역 대한 객관적인 수치 즉 면적, 부피, 장단축의 길이 등을 분석하고 3차원 재구성을 위해 선행되어야 하는 중요한 과정이다. 현재 윤곽선 추출에 대한 않은 방법들이 개발 중에 있으나 이 방법들은 한계를 지니고 있어 더 높은 수준의 처리가 요구된다. 본 논문에서는 active contour model(snake)을 이용하여 MR뇌 영상에서 종양을 추출하였다. Snake의 에너지 최적화 문제를 dynamic programming을 사용하여 개선하였으며 canny edge detection을 이용하여 잡음에 덜 민감하도록 하였다.

  • PDF

LiDAR 데이터를 이용한 옥트리 분할 기반의 지붕요소 자동추출 (Automatic Extraction of Roof Components from LiDAR Data Based on Octree Segmentation)

  • 송낙현;조홍범;조우석;신성웅
    • 한국측량학회지
    • /
    • 제25권4호
    • /
    • pp.327-336
    • /
    • 2007
  • 건물의 3차원 모델링은 3차원 공간정보를 구축하는데 있어서 매우 중요한 요소이다. 기존의 3차원 건물 모델링은 대부분 입체 항공사진을 이용하여 도화사에 의해 수동으로 진행되어 많은 시간과 비용이 소요된다. 또한 연구논문이나 실험적으로 시도되고 있는 일부 자동화 방법은 건물을 정확하고 세밀하게 묘사하는데 한계가 있다. 건물의 3차원 모델링을 자동화하기 위해서는 건물 외곽선과 지붕 모양을 정확하게 추정할 수 있는 알고리즘이 필수적이다. 최근 다양한 분야에서 활용되고 있는 항공라이다(LiDAR) 데이터는 지형지물에 대한 3차원 정보를 제공하지만, 이를 이용하여 건물 외곽선을 정확하게 추정하기에는 기술적으로 어려움이 있다. 따라서 기존에 구축된 수치지도의 건물 외곽선을 이용한다면, 항공라이다 데이터를 이용하여 3차원 평면을 최소단위로 하는 건물지붕의 구성요소들을 조합하여 자동으로 건물지붕의 3차원 모델링이 가능하다. 본 논문은 기 구축된 수치지도의 건물 외곽선과 옥트리(octree) 분할을 기반으로 항공라이다 데이터를 이용하여 건물지붕의 구성요소를 자동으로 추출하는 방법을 제안하였다. 건물지붕에 대한 항공라이다 데이터를 3차원 공간상에서 재귀적으로 분할하여 패치(patch)를 구성하고, 동일한 속성을 갖는 패치들을 병합하여 지붕의 구성요소를 추출한다. 항공라이다 데이터를 이용하여 제안된 방법으로 실험한 결과, 평면, 게이블, 다면, 곡면 등 다양한 형태의 지붕에 대한 구성요소들을 자동으로 추출 할 수 있었다.

앵커 객체 추출을 이용한 앵커 프레임 검출 (Anchor Frame Detection Using Anchor Object Extraction)

  • 박기태;황두선;문영식
    • 대한전자공학회논문지SP
    • /
    • 제43권3호
    • /
    • pp.17-24
    • /
    • 2006
  • 본 논문에서는 뉴스 비디오에서 앵커 프레임 검출을 위한 알고리즘을 제안한다. 제안된 알고리즘은 다음과 같이 4단계로 구성된다. 첫 번째 단계에서, 뉴스 비디오를 비디오 샷들로 분할하기 위해 누적 히스토그램(cumulative histogram) 기법을 이용하여 샷 경계(shot boundary)를 검출한다. 두 번째 단계에서는 각 비디오 샷 경계에서 얼굴 영역들을 찾기 위해서 피부 컬러(skin color) 정보를 이용하고, 세 번째 단계에서는, 앵커 객체를 추출하기 위해서 사람의 상체 부분의 컬러 정보를 이용하여 앵커 후보 프레임을 검출하며, 마지막 단계에서, 후보 프레임들에 대해서 앵커 프레임과 비앵커 프레임을 분류하기 위해서 그래프 이론을 이용한 클러스터 분석 알고리즘을 적용한다. 실험 결과를 통해서 제안한 알고리즘이 효과적으로 앵커 프레임을 검출하는 것을 보여준다.

Question Similarity Measurement of Chinese Crop Diseases and Insect Pests Based on Mixed Information Extraction

  • Zhou, Han;Guo, Xuchao;Liu, Chengqi;Tang, Zhan;Lu, Shuhan;Li, Lin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권11호
    • /
    • pp.3991-4010
    • /
    • 2021
  • The Question Similarity Measurement of Chinese Crop Diseases and Insect Pests (QSM-CCD&IP) aims to judge the user's tendency to ask questions regarding input problems. The measurement is the basis of the Agricultural Knowledge Question and Answering (Q & A) system, information retrieval, and other tasks. However, the corpus and measurement methods available in this field have some deficiencies. In addition, error propagation may occur when the word boundary features and local context information are ignored when the general method embeds sentences. Hence, these factors make the task challenging. To solve the above problems and tackle the Question Similarity Measurement task in this work, a corpus on Chinese crop diseases and insect pests(CCDIP), which contains 13 categories, was established. Then, taking the CCDIP as the research object, this study proposes a Chinese agricultural text similarity matching model, namely, the AgrCQS. This model is based on mixed information extraction. Specifically, the hybrid embedding layer can enrich character information and improve the recognition ability of the model on the word boundary. The multi-scale local information can be extracted by multi-core convolutional neural network based on multi-weight (MM-CNN). The self-attention mechanism can enhance the fusion ability of the model on global information. In this research, the performance of the AgrCQS on the CCDIP is verified, and three benchmark datasets, namely, AFQMC, LCQMC, and BQ, are used. The accuracy rates are 93.92%, 74.42%, 86.35%, and 83.05%, respectively, which are higher than that of baseline systems without using any external knowledge. Additionally, the proposed method module can be extracted separately and applied to other models, thus providing reference for related research.