• 대한조선학회지
• /
• 제23권2호
• /
• pp.1-13
• /
• 1986

The nonlinear hydrodynamic forces acting on a two-dimensional circular cylinder, oscillating with large amplitude in the free surface, are calculated by using the Semi-Lagrangian Time-Step-ping Method used by O.M. Faltinsen. In present calculation the position and the potential value of free surface are calculated using the exact kinematic and dynamic free surface boundary condition. At each time step an integral equation is solved to obtain the value of potential and normal velocity along the boundaries, consisting of both the body surface and the free surface. Some effort was devoted to the elimination of instability arising in the range of high frequency. Numerical simulations were performed up to the 3rd or 4th period which seems to be enough for the transient effect to die out. Each harmonic component and time-mean force are obtained by the Fourier transform of forces in time domain. The results are compared with others' experimental and theoretical results. Particularly, the calculation shows the tendency that the acceleration-phase 1st-harmonic component(added mass) increases as the motion amplitude increases and a reverse tendency in the velocity-phase 1st-harmonic component(damping coefficient). The Yamashita's experimental result also shows the same tendency. In general, the present result show relatively good agreement with the Yamashita's experimental result except for the time-mean force.

• 한국전산구조공학회논문집
• /
• 제21권5호
• /
• pp.475-482
• /
• 2008

본 논문은 로터 시스템의 디스크 회전운동을 표현하는데 있어 운동방정식을 통합하는 과정에서 기존 연구자들이 채택한 오일러 각 사용법이 일관성이 없음을 지적하였다. 기존 연구자들은 오일러 각 순서가 달라서 속도와 운동에너지도 달리 산정하였음은 물론, 운동방정식은 오직 선형 시스템만 취급해 왔다 이러한 오일러 각 사용법의 단점을 극복하기 위하여 회전운동을 더욱 단순하게 매개화할 수 있는 4원법(quaternion)과 구 좌표계를 적용하여 비선형 시스템을 도출하였다. 이를 바탕으로 수치해석을 통하여 기존 방법과 비교하여 제안한 방법의 신뢰성과 우수성을 보였다.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.34-41
• /
• 1997

This paper presents a technique to control a very flexible robot moving in a vertical plane. The flexible robot is modeled as an Euler-Bernoulli beam. Elastic deformation is approximated using the assmed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID cnotrol tech- nique. The proportional, integral and deivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and no steady state error, and short settling time. The effectiveness of the developed control scheme is showed in the hub angular diaplacement control experiment. Three different end masses are uned in the experiment. The experimental results show that developed control algorithm is very effective showing little overshoot, no steady state error, and less than 2.5 second settl- ing time in case of having an end mass which is equivalent to 45% of the manipulator mass. Also the experimental results show that the residual vibration fo the end point is effectively controlled.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.305-330
• /
• 2022

This article aims to investigate the static deflection and stress analysis of bi-directional functionally graded porous plate (BDFGPP) modeled by unified higher order kinematic theories to include the shear stress effects, which not be considered before. Different shear functions are described according to higher order models that satisfy the zero-shear influence at the top and bottom surfaces, and hence refrain from the need of shear correction factor. The material properties are graded through two spatial directions (i.e., thickness and length directions) according to the power law distribution. The porosities and voids inside the material constituent are described by different cosine functions. Hamilton's principle is implemented to derive the governing equilibrium equation of bi-directional FG porous plate structures. An efficient numerical differential integral quadrature method (DIQM) is exploited to solve the coupled variable coefficients partial differential equations of equilibrium. Problem validation and verification have been proven with previous prestigious work. Numerical results are illustrated to present the significant impacts of kinematic shear relations, gradation indices through thickness and length, porosity type, and boundary conditions on the static deflection and stress distribution of BDFGP plate. The proposed model is efficient in design and analysis of many applications used in nuclear, mechanical, aerospace, naval, dental, and medical fields.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.35-47
• /
• 1996

포텐셜을 기저로 하는 판요소법을 사용하여 자유 표면이 존재하는 유동장에서 일정 속도로 전진하는 3차원 물체의 형상을 설계하였다. 설계 방법으로는 원하는 압력 분포를 경계 조건으로 부여하고 이를 만족하는 물체 형상을 찾아내는 역해석법(inverse method)을 사용하였다. 즉, 주어진 압력으로부터 물체 표면에 분포된 법선 다이폴의 세기인 포텐셜 값을 결정하게 되며, 이는 물체 표면에 대한 Dirichlet형태의 경계 조건으로서 Green의 정리로부터 유도된 적분 방정식을 해석하게 된다. 전체 속도 포텐셜은 기본 유동인 선속에 대한 성분과 선제에 의하여 교란되는 성분으로 구성되어진다고 가정하였으며, 교란 포텐셜을 사용하여 선형화된 자유 표면 경계 조건을 적용하였다. 적분 방정식에 대한 수치 해석을 위해 물체 표면에 법선 다이폴과 Rankine 쏘오스를 분포하였으며, 자유 표면에는 Rankine 쏘오스를 분포하고 4점 유한 차분법을 사용하여 자유 표면 경계 조건이 만족되도록 하였다. 해로서 얻어지는 각 판요소에서의 Rankine 쏘오스의 세기는 가상의 유동 출입량으로서 형상 수정항으로 사용되었다. 몰수 회전 타원체의 형상 설계에 대하여 본 설계법을 적용한 결과 무한 수심에서나 조파 상태에서 $4{\sim}6$회의 반복 계산으로 충분히 수렴된 해를 얻을 수 있었다. 또한 자유 표면을 가르고 전진하는 Wigley 수학적 선형에 대한 형상 설계를 수행하여 만족스러운 결과를 얻어내었으며, 얻어진 수치해는 매우 안정적이고 빠른 수렴성을 보였다. 선형의 우열 비교를 통해 조파 저항을 감소시킬 수 있는 압력 분포의 형태를 파악하였으며, 이를 바탕으로 조파 저항의 관점에서의 5500TEU급 콘테이너 운반선의 설계를 수행하였다. 설계되어진 새로운 선형은 조파 저항의 관점에서 기존의 선형보다 계산과 실험에서 모두 우수하게 개량된 것으로 나타났다.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.159-173
• /
• 1991

본 논문에서는 양력판 이론을 사용하여 2차원 수중익에 발생한 비 대칭 초월 공동 문제를 포텐셜을 기저로하여 수치 해석하였다. 수중익과 공동 표면에 법선 다이폴을 분포하고 공동 표면에는 공동 형상을 찾기위하여 쏘오스를 분포하였다. 수중익 표면에서의 운동학적 경계조건은 수중익 내부에서의 전체 포텐셜이 0이라는 조건으로 대치하였고 공동 표면에서의 역학적 경계조건은 공동 표면에서의 접선 방향 속도가 일정하다는 조건으로 표현되었다. 표면에 특이 함수를 분포하여 포텐셜을 기저로하여 공동 문제를 해석하였기 때문에 압력 분포에 대하여, 특히 수중익의 앞날 근처에서는 양력면 이론에 의한 결과보다 더욱 향상된 정도의 결과를 얻었다. 본 이론은 먼저 주어진 공동 길이에 대하여 그에 상응하는 공동 형상 및 공동수를 구하였다. 좀더 좋은 결과를 얻기 위하여 새로이 계산된 공동 표면과 수중익 표면에 또 다시 특이 함수를 분포하여 그곳에서 경계 조건을 만족시킴으로써 새로운 공동 형상 및 공동수를 구하는 반복 계산을 수행하였다. 본 이론에 의한 계산 결과의 검증을 위하여 폭 넓은 수렴성 시험을 수행하였으며 특히, Geurst의 선형 이론에 의한 해석해 및 Wu의 비 선형 이론에 의한 해석해, 그리고 Acosta, Parkin, Meijer, Silberman, Waid의 실험 결과와 비교한 결과, 본 이론의 효용성을 입증하였다.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1156-1162
• /
• 2005

In this study, a noble method is proposed to prevent the edge overcoating (EOC) that may develop near the edge of the steel strip in the gas wiping process of continuous hot-dip galvanizing. In our past study (Trans. of the KSME (B), Vol. 27, No. 8, pp. $1105\~1113$), it was found that EOC is caused by the alternating vortices which are generated by the collision of two opposed jets in the region outside the steel strip. When the two opposed jets collide at an angle much less than $180^{o}$, non-alternating stable vortices are established symmetrically outside the steel strip, which lead to nearly uniform pressure on the strip surface. In order to deflect both jets downward by a certain angle, a cylinder with small diameter is installed tangentially to the exit of the lower lip of the two-dimensional jet. In order to find an optimum cylinder diameter, the three dimensional flow field is analysed numerically by using the commercial code, STAR-CD. And the coating thickness is calculated by using an integral analysis method to solve the boundary layer momentum equation. In order to compare the present noble method with the conventional baffle plate method to prevent the EOC, the flow field with a baffle plate is also calculated. The calculation results show that the tangentially installed cylinder at the bottom lip of the jet exit is more effective than the baffle plate to prevent EOC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.21-34
• /
• 1988

Machinery enclosures are widely adopted to reduce the noise emission in various fields of application. Emitted noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound with different path of propagation. One is the "structure-borne sound", while the other is "air-borne sound". In order to get a most efficient machinery enclouser a prudent consideration upon the above structure-borne and air-borne sound is required, as the guiding principle of contermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subjects for the structure-borne sound, and the specifications of absorbing members and damping panels are the major related matters for the air-borne sound. Hence, it seems very efficient to separate the total sounds into two categories with a great accuracy when one think of further reduction of noise from the existing enclosure, although its separating methods have not been made clear for many years. Author proposes an application method of experimental modal analysis to extract the structure-borne sound from the measured total radiation sound, as the air-borne sound is deduced by the vectorial difference between the measured total radiation sound and the calculated structure-borne sound. In order to calculate the correct structure-borne sound by the excitation at an arbitrary point on the enclosure structure, it is important to decide 1) how to estimate the enclosure's surface vibration velocity and 2) how to compute the radiation sound which is considered as the effect of vibration modes of enclosure surface. The former can be solved with total frequency response function calculated by the application of experimental modal analysis. The latter is to be solved by the author's new approaches for radiation sound computation by means of the Rayleigh's integral equation and the boundary-element method applied complex surface vibration velocity. As a first step, structure-borne sound by the excitation at an arbitry point on the rectangular plate with fixed edges, has been calculated to verified the reliability of the developed computation methods. The results of calculation show good agreements with those of the actual measurements.actual measurements.

• Structural Engineering and Mechanics
• /
• 제75권2호
• /
• pp.193-209
• /
• 2020

This paper presents a new hyperbolic shear deformation plate theory including the stretching effect for free vibration of the simply supported functionally graded plates in thermal environments. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. This theory has only five unknowns, which is even less than the other shear and normal deformation theories. The present one has a new displacement field which introduces undetermined integral variables. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume power laws of the constituents. The equation of motion of the vibrated plate obtained via the classical Hamilton's principle and solved using Navier's steps. The accuracy of the proposed solution is checked by comparing the present results with those available in existing literature. The effects of the temperature field, volume fraction index of functionally graded material, side-to-thickness ratio on free vibration responses of the functionally graded plates are investigated. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates with stretching effect in thermal environments.