• Structural Engineering and Mechanics
• /
• v.18 no.3
• /
• pp.377-388
• /
• 2004

Based on the basic equations of elasticity, free-edge effects on stresses in cross-ply laminated plates are found by using the state space method. The laminates are subjected to uniaxial-uniform extension plate, which is a typical example of general plane strain problem. The study takes into account material constants of all individual material layers and the state equation of a laminate is solved analytically in the through thickness direction. By this approach, a composite plate may be composed of an arbitrary number of orthotropic layers, each of which may have different material properties and thickness. The solution provides a continuous displacement and inter-laminar stress fields across all material interfaces and an approxiamte prediction to the singularity of stresses occurring in the boundary layer region of a free-edge. Numerical solutions are obtained and compared with the results obtained from an alternative numerical method.

• Computers and Concrete
• /
• v.1 no.4
• /
• pp.433-455
• /
• 2004

The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.

• Journal of the Chungcheong Mathematical Society
• /
• v.21 no.2
• /
• pp.269-278
• /
• 2008

Let ${\partial}D$ be the boundary of the open unit disk D in the complex plane and $L^p({\partial}D)$ the class of all complex, Lebesgue measurable function f for which $\{\frac{1}{2\pi}{\int}_{-\pi}^{\pi}{\mid}f(\theta){\mid}^pd\theta\}^{1/p}<{\infty}$. Let P be the orthogonal projection from $L^p({\partial}D)$ onto ${\cap}_{n<0}$ ker $a_n$. For $f{\in}L^1({\partial}D)$, ${\hat{f}}(z)=\frac{1}{2\pi}{\int}_{-\pi}^{\pi}P_r(t-\theta)f(\theta)d{\theta}$ is the harmonic extension of f. Let ${\hat{P}}$ be the composition of P with the harmonic extension. In this paper, we will show that if $1, then ${\hat{P}}:L^p({\partial}D){\rightarrow}H^p(D)$ is bounded. In particular, we will show that ${\hat{P}}$ is unbounded on $L^{\infty}({\partial}D)$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1474-1482
• /
• 1994

In order to study the influence of a circular inclusion on a stress field neat a crack tip, mutual interference of a crack and the circular inclusion is analyzed by using the two dimensional boundary element method program made for the analysis of a bimaterial inclusion. The stress intensity factor of an inclusion which has small stiffness is a little greater than that of large stiffness in the near-by crack tip, and similar values tends to appear for distant crack tips. A line crack shows the repetition phenomena which caused by stress mutual interference depending on the radius and stiffness of an inclusion, and the repetition phenomena becoms weak in the inclusion which has large stiffness. Stress mutual interference shows repetition phenomena after extension of a line crack by the length of the radius of the inclusion which has small stiffness.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.179-185
• /
• 2001

Through the observation of wear scar of two ceramic materials, microstructural wear mechanisms was investigated. As for the $Al_2O_3$-5 vol% SiC nanocomposite, the grain boundary fracture was suppressed by the presence of SiC nano-particles. The intragranular SiC particles have inhibited the extension of plastic deformation through the whole grain. Part of plastic deformation was accommodated around SiC particles, which made a cavity at the interface between SiC and matrix alumina. On the other hand, gas-pressure sintered silicon nitride showed extensive grain boundary fracture due to the thermal fatigue. The lamination of wear scar was initiated by the dissolution of grain boundary phase. These two extreme cases showed the importance of microstructures in wear behavior.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.4
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.

• KIEAE Journal
• /
• v.11 no.5
• /
• pp.55-67
• /
• 2011

The purpose of this research is to find applicable design characteristics and methods of communal spaces in vertical urban multi-family housing. With this goal, several overseas' multi-family housing projects are selected and their communal spaces are identified. The design characteristics of the communal spaces are analyzed with a special focus on the territories such as an individual unit boundary, building interior and exterior boundary. In terms of the framework for analysis, territoriality, openness, and unique characteristics are reviewed. As a result, the communal spaces are created using various spatial composition methods such as addition, subtraction, connection, extension, accumulation, and isolation. The communal space programs are integrated in plans and sections throughout the buildings. Visual openness and connection with surrounding urban environments are articulated by void spaces, transparent and translucent building materials, green spaces, and applications of graphical images. Communal identities and aesthetics are emphasized by unique building forms and space arrangements. The uses of finish materials, colors, objects, and images add strong characters to the communal spaces. For a further research, it is necessary to combine a design method study with residents' behaviors and community interactions.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3E
• /
• pp.118-135
• /
• 2009

The level set based approach is one of active methods for contour extraction in image segmentation. Since Osher and Sethian introduced the level set framework in 1988, the method has made the great impact on image segmentation. However, there are some problems to be solved; such as multi-objects segmentation, noise filtering and much calculation amount. In this paper we address the drawbacks of the previous level set methods and propose an extension of the traditional fast level set to cope with the limitations. We introduce a relationship matrix, a new split-and-merge criterion, a modified Chan-Vese criterion and a novel filtering criterion into the traditional fast level set approach. With the segmentation experiments we evaluate the proposed method and show the promising results of the proposed method.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.31-38
• /
• 2002

The purpose of this study is to investigate the architectural change of the modern Korean farm-houses. Regional boundary of this study is confined to Pocheon-Gun, and the object is mainly forty-two farm-houses as long as sixty years since it was built. An analysis is made on the change of spaces, facilities and finished materials of farm-houses. The results of this study, An-Chae have changed for the more comfortable living conditions through the spatial changes as like the fittest facilities with spatial extension and integration. And in Arae-Chae, unlike An-Chae, the old and unused space often have transformed to the other function and the its facilities remained still unimproved.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.264-267
• /
• 2014

본 논문에서는 High Efficiency Video Coding (HEVC)의 확장 버전에 적용된 바 있는 화면 내 블록 복사 (Intra Block Copy; IntraBC) 기술에 대해 개선 알고리듬을 제안하고 있다. IntraBC 는 화면 내 부호화 진행 시, 예측 유닛 (prediction unit; PU)단위로 현재 부호화하고 있는 코딩 트리 유닛 (coding tree unit; CTU)의 왼쪽에 위치하는 CTU 를 탐색하는 기법이다. 이때, 왼쪽 CTU 에서 가장 비슷한 블록을 찾아 그 움직임 벡터 (motion vector)를 저장 및 전송하게 된다. 제안하는 알고리듬은 움직임 벡터를 찾기 전, 왼쪽의 복원된 CTU 에 대해 특정 필터를 적용하여 블록킹 열화 (blocking artifact)를 완화시키고, 더욱 정확하고 섬세한 움직임 벡터를 찾도록 하였고, 이는 자연영상보다 스크린 콘텐츠에 더욱 적합함을 확인할 수 있었다.