• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2751-2761
• /
• 1994

A numerical investigation on the three-dimensional laminar natural convection heat transfer in the periodically fully developed PCB channel has been performed. When heat generating blocks mounted on the adiabatic wall make a channel with their facing shrouding wall, the flow inside the channel becomes periodically fully developed. A single module in the periodically fully developed region is chosen for computational domain in order to save computer storage and computational time. The periodic boundary condition is applied in the anlaysis. The effects of the parameters such as the Rayleigh number, the number of the modules, and the height of channel are examined to obtain the optimum condition for the enhancement of the cooling effectiveness. The result shows that the cooling effect is improved with increasing Rayleigh number and channel height, and decreasing the number of the module. The result also indicates that increasing the height of the channel and number of the module is recommended for a limited space.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.151-157
• /
• 1999

In this study, tile characteristics of three dimensional flow fields in centrifugal flump impeller are investigated by numerically. Detailed analysis and understanding of flow field in centrifugal pump are very important to predict performance of components. The three dimensional viscous fluid flow in centrifugal pump is distingushed isentropic process region from irreversible process region by wall shear effect, secondary flow, centrifugal and Coriolis forces, variation of boudary layers. Development of low momentum region by viscous fluid flow in the centrifugal impeller causes stall and blockage which is irreversible process region, and resulting in decrease of the performance and efficiency of centrifugal pump. Especially, the result is that Coriolis and centrifugal forces are most powerful factors which are increasing the irreversible region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.92-101
• /
• 2005

It is difficult to detect the accurate detection which leads the camera it moves follows in change of the noise or illumination and Also, it could be recognized with backgound if the object doesn't move during hours. In this paper, the proposed method is updating changed background image as much as N＊M pixel mask as time goes on after get a difference between imput image and first background image. And checking image pixel can efficiently detect moving by computing fixed distance pixel instead of operate all pixel. Also, set up minimum area of object to use boundary point of object abstracted through checking image pixel and motion detect of object. Therefore motion detection is available as is fast and correct without doing checking image pixel every Dame. From experiment, the designed and implemented system showed high precision ratio in performance assessment more than 90 percents.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.491-498
• /
• 1997

Geographic Infprmation System(GIS)is being apply to extended from specified ppkication to general purpose deu to the omprovement of computing power.As one part of postal Integarated Information Servies, Postalroute Optimication system(PROS) is comprsed of the composed of the shortest pathe genrator for providing fast and shortest route of postal delivery, the ischronal area generator, the boudary relacation generator, GIS engine, road map, and rdelational database , etc.This paper is related to creation algorithm of the shortest path generation (SPAWD;Shortest Path Algorithm With Direction)from PEOS model.To differ from the exsting shortest path generating methods, this paper suggests SPAWD alforithm for searching destinations of fast time between start and destination points with dirdstion.It comapares and analyzes the new algorithm with existion algorithms, and suggests directions of future studies.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.176-176
• /
• 2000

Recently developed Austenite stainless steel,309L was to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also. the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied.1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained.2) The form of martensite at the transition region was occured by reversible transition region, leading to increasing Ms point.3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling.4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the grain boudary.(Received August 3, 1999)

• Korean Institute of Interior Design Journal
• /
• v.22 no.4
• /
• pp.23-32
• /
• 2013

This study represents something in common and differences of organic characteristics between early modern architecture and contemporary architecture analysing F. L. Wright's Robie House and Toyo Ito's Sendai Mediatheque. A natural organic body cannot be separated from the natural environment, and each part of an architecture has each own property and forms a whole at the same time. That is a basic concept of organic architecture, and a framework for analysis is set up based on it. The followings are similarities and differences of organic concept and interpretation between Wright's Robie House and Ito's Sendai Mediatheque First, Wright' Robie house unites with the natural surrounding, using a physically close connection to the ground. In contract, Ito's Mediatheque shows characteristics of noncentural and fluidic space that are metaphorically reflecting tangible and intangible of factors in modern city, where there is an ambiguous physical boundary between architecture and urban environment. Next, floors, walls and ceilings of Wright's housing as for basic building blocks are physically separated and at the same time form formative unity from the point of view of a physical and structural organic body. And continuous flow of faces of separated walls form an organism united with the nature from a physical aspect. On the contrary to this, there is an no-boudary and floating organic architecture of integrated structure from ambiguous setting of relation between architecture and urban space in Ito's architecture. Especially, Mediatheque shows semantic integration of floating urban environmental factors through horizontal and vertical integration of horizontal slabs, vertical pipes, and skins. Last, horizontal and vertical factors of Wright' Housing is appreciated as an basic experienced structure in terms of spacial perception and fluidic inner spaces in Wright's housing is completed with a series of spatial experiences in a visual sense. On the other hand, no-boundary and floating space of Ito's architecture accept user's physical and virtual body. Especially, there is an integration transcending beyond time and space, accepting an imaginary body and events with the course of time at Ito's Mediatheque.