• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1514-1519
• /
• 2001

This paper is concerned with design, manufacturing and performance test of LIPCA ( Lightweight Piezo- composite Curved Actuator) using a top carbon fiber composite layer with near -zero CTE(coefficient of thermal expansion), a middle PZT ceramic wafer and a bottom glass/epoxy layer with high CTE. The main point of this design is to replace the heavy metal layers of THUNDER by thigh tweight fiber reinforced plastic layers without losing capabilities to generate high force and large displacement. It is possible to save weight up to about 30% if we replace the metallic backing material by the light fiber composite layer. We can also have design flexibility by selecting the fiber direction and the size of prepreg layers. In addition to the lightweight advantage and design flexibility, the proposed device can be manufactured without adhesive layers when we use epoxy resin prepreg system. Glass/epoxy prepregs, a ceramic wafer with electrode surfaces, and a graphite/epoxy prepreg were simply stacked and cured at an elevated temperature (177 $^{circ}C$ after following an autoclave bagging process. It was found that the manufactured composite laminate device had a sufficient curvature after detached from a flat mold. The analysis method of the cure curvature of LIPCA using the classical lamination theory is presented. The predicted curvatures are fairly in agreement with the experimental ones. In order to investigate the merits of LIPCA, a performance test of both LIPCA and THUNDE$^{TM}$ were conducted under the same boundary conditions. From the experimental actuation tests, it was observed that the developed actuator could generate larger actuation displacement than THUNDERT$^{TM}$.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.284-294
• /
• 2020

As a solution to local and social problems, the active use of smart city living labs is becoming increasingly important. The answer to solving local and social problems lies in the citizen and the field. The purpose of this study is to establish a smart city living lab model based on citizen participation. In this study, smart city living lab model(4P-SCLLM) based on citizen participation was established through domestic and overseas living lab methodology and case analysis. In order to evaluate the systemicity and specificity of the 4P-SCLLM, a smart city living lab model, we recently compared it with the living lab process in Busan where smart city living lab is applied. As a result of analyzing, the analysis shows similar trends in each stage, and Busan's private sector showed a similar process to 4P-SCLLM On the other hand, public and private sector cooperation and support systems were found to be less than the 4P-SCLLM model And In technology and methodology, the 4P-SCLLM model is analyzed to have a living lab process that incorporates new technologies. In order to maintain the 4P-SCLLM continuously, first, participants and stakeholders need to participate actively and communicate while collaborating on the whole process from start to finish. Second, public awareness needs to be improved. Third, continuous citizenship verification of services is needed. Fourth, citizens' constant participation is needed. Through these implications, this study proposed 4P-SCLLM as a smart city living lab model suitable for the domestic situation.

• Journal of Internet Computing and Services
• /
• v.11 no.5
• /
• pp.81-94
• /
• 2010

The purpose of the study is to suggest a standardized teaching-learning model as a method for strengthening the practical effect of the information ethic education for the adolescent, which is practiced in schools as the inter-disciplinary way. A survey was put to teachers and their needs are analyzed. At the same time, in order to draw the practical teaching-learning model, the teaching examples were collected for contesting. Through this process, a bottom-up approach which tries to analyze the actual class examples and generalizes them, the teaching-learning model has been suggested. As a result, another survey was conducted for the investigation of the efficacy of the model between beneficiary group and comparison group. The results are as followings; the experiment group showed a higher index in regard with such items as Information Culture Index, Lesson Satisfaction Degree, and Practice Will than Comparison Group, and the differences are statistically significant. According to the results of the analysis.

• Journal of the Korean Institute of Educational Facilities
• /
• v.27 no.2
• /
• pp.35-47
• /
• 2020

The need for communication is emphasized in decision making, design methods and processes for the educational environment that contain new curricula and learning methods. In this study, we tried to find the direction and agenda of learner-centered environment restructuring through the 'user-integrated platform' in which various subjects related to school space environment understand each other's position and overcome the barriers and prejudices of each sector. The project was planned in a 'bottom-up process' method that uncovered the singularities of the previous stage and led the main contents of the next stage. The various subjects who participated in the project shared their own experiences and different positions regarding the school space. At the workshop, the topics of the participating teams were divided into two categories. The teams in the category of the 'school culture and space' insisted innovation of 'the school culture' as a premise for the restructuring of the 'school space', and proposed schools with different interpretations of 'authority and rules of school', 'the meaning of learning and play' and 'the main character of school. The teams in the category of the 'school borders and spaces' focused on 'communication' and proposed schools containing 'emotional care of students', 'borders between schools and villages', 'village community schools', and 'interspace and niche time'. After the workshop, we were able to derive the direction and architectural strategy of the school space restructuring by analyzing the works of the participants. Through this study, we confirmed the possibility of translating user's ideas into the professional domain through careful planning, preparation, facilitation, and analysis in Participatory Design.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.497-509
• /
• 2022

Lines are the oldest visual elements in human history and are closely related to human life and drawings and symbols drawn with lines on cave paintings and rocks have existed as alternative images for human survival. In arts the line reveals the core of the object within a short period of time and in art therapy it becomes a medium that can diagnose the client's psychological state and intervene therapeutically. However although line drawing has therapeutic importance in the process as well as diagnosis studies on its effectiveness and therapeutic characteristic have not been actively conducted. Therefore in this study the characteristics related to line art in art therapy are first derived through 'Triangular Verification of Theory', 'Qualitative Content Analysis', and 'Finding Common Parts' in domestic and foreign literature. As a result I will examine the Movement which is a key therapeutic element of line drawing in connection with the brain structure. Through this I will examine the therapeutic mechanisms that affect the body, brain and mind of the movement of line drawing and examine and suggest how it can be used in art therapy.

• Clean Technology
• /
• v.17 no.4
• /
• pp.389-394
• /
• 2011

A compact adsorption-based process for removal of carbon dioxide and nitrogen from natural gas has been discussed. Among the adsorption-based processes, especially, the pressure swing adsorption (PSA) process has been a suitable unit operation for the purification and separation of gas because of low operation energy and cost. A step cycle is made up of pressurization, feed, equalization, blowdown and rinse. In this work, the PSA process is composed of zeolite 13X and carbon molecular sieve (CMS) for removal of carbon dioxide and nitrogen from mixed gas containing $CH_4/CO_2/N_2$ (75:21:4 vol%). A CMS selectively removes carbon dioxide and a zeolite 13X separates nitrogen from methane. CMS is investigated experimentally due to the high throughput of the faster diffusing component ($CO_2$). The gas composition of top, bottom and feed tank was measured with the gas chromatography (GC) using TCD detector, helium as carrier gas and packed column for analysis of methane, carbon dioxide, and nitrogen.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2010

The LCC (Liquid Cadmium Cathode) structure to be developed for inhibiting the formation and growth of the uranium dendrite has been known as a key part in the electrowinning process for the simultaneous recovering of uranium and TRU (TRans Uranium) elements from spent fuels. A zinc-gallium (Zn-Ga) experimental system which is able to be functional in aqueous condition and normal temperature has been set up to observe the formation and growth phenomena of the metal dendrites on liquid cathode. The growth of the zinc dendrites on the gallium cathode and the performance of the existing stirrer type and pounder type cathode structure were observed. Although the mechanical strength of the dendrites appeared to be weak in the electrolyte and easily crashed by the various cathode structures, it was difficult to effectively submerge the dendrite into the bottom of the liquid cathode. Based on the results of the aqueous phase experiments, a lab-scale electrowinning experimental apparatus which are applicable to the development of LCC srtucture for the electrowinning process was established and the performance tests of the different types of LCC structure were conducted to prohibit the uranium dendrite growth on LCC surface. The experimental results of the stirrer type LCC structures have shown that they could not effectively remove the uranium dendrites growing at the inner side of the LCC crucible and the performances of the paddle and harrow type LCC structure were similar. Therefore a mesh type LCC structure was developed to push down the uranium dendrites to the bottom of the LCC crucible growing on the LCC surface and at the inner side of the crucible. From the experimental results for the performance test of the mesh type LCC structure, the uranium was recovered over 5 wt% in cadmium without the growth of uranium dendrites. After completion of the experiments, solid precipitates of the bottom of the LCC crucible were identified as an intermetallic compound (UCd11) by the chemical analysis.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.105-119
• /
• 2021

The innovation cluster is formed by cooperation and networking among a number of actors, including companies, universities, research institutes, government and other supporting organizations, but the main subject of innovation in the venture ecosystem, which can be said to be the core of the innovation cluster, is the enterprise. Therefore, enterprises in innovation cluster can be seen as a major user of the innovation cluster policy. In order for the policy to be executed smoothly, policy acceptance is important. However, existing research on policy prioritization tends to be centered on policy providers, so it is necessary to check them from the perspective of policy users. Accordingly, this study conducted discussions from a two-way perspective to establish the correct policy direction through a balanced perspective between a policy provider-centered top-down perspective and a policy user's bottom-up perspective. First, the factors for activating the innovation cluster (three factors in the first level and 14 factors in the second level) were derived through prior research and expert interviews. After that, the importance of the factors for activating the innovation cluster was analyzed using AHP (Analytic Hierarchy Process) for the policy provider group and the user group in the Daedeok Innopolis, a representative case of innovation cluster policy. As a result of analyzing the importance of the innovation cluster activation factors from the perspectives of policy providers and users, some similarities were also seen, but overall differences in mutual perception were found. It was found that the policy provider group focused on innovation creation factors, while the policy user group viewed innovation creation, clusters, and industrial location factors from a more balanced perspective. This study is meaningful in that it deals with both perspectives in a balanced way by expanding the targets from the existing policy provider-centered research to policy users. In addition, practical contributions exist in the aspect of providing basic data so that policies can be carried out based on corporate needs in fostering innovation clusters.

• Journal of Internet Computing and Services
• /
• v.23 no.6
• /
• pp.79-86
• /
• 2022

This study aims to analyze the research trends on the civic participation in a smart city and to present implications to policy makers, industry professionals and researchers. As rapid urbanization is defining development trend of modern city, urban problems such as transportation, environment, and energy are spreading and intensifying around the city. Countries around the world are introducing smart cities to solve these urban problems and to achieve sustainable development. Recently, many countries are modifying urban planning from top-down to down-up by actively engaging citizens to participate in the urban construction process directly and indirectly. Although the construction of smart cities is being promoted in Korea to solve urban problems, awareness of smart cities and civic participation are low. In order to overcome this situation, discussions on ideas and methods that can increase civic participation in smart cities are continuously being conducted. Therefore, in this study, by collecting publication containing both 'Smart Cities' and 'Participation (Engagement)' in Scopus DB, the topics of related studies were categorized and research trends were analyzed using topic modeling. Through this study, it is expected that it can be used as evidence to understand the direction of civic participation research in smart cities and to present the direction of related research in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.3
• /
• pp.137-149
• /
• 2021

Cable-stayed bridges are infrastructure facilities of a highly public nature; therefore, it is essential to ensure operational safety and prompt response in the event of a collapse or damage caused by natural and social disasters. Among social disasters, impact accidents can occur in bridges when a vehicle collides with a pier or when crashes occur due to aircraft defects. In the case of offshore bridges, ship collisions will occur at the bottom of the pylon. In this research, a procedure to evaluate the structural behavior of a cable-stayed bridge for aircraft impact is suggested based on a numerical analysis approach, and the feasibility of the procedure is demonstrated by performing an example assessment. The suggested procedure includes 1) setting up suitable aircraft impact hazard scenarios, 2) structural modeling considering the complex behavior mechanisms of cable-stayed bridges, and 3) structural behavior evaluation of cable-stayed bridges using numerical impact simulation. It was observed that the scenario set in this study did not significantly affect the target bridge. However, if impact analysis is performed through various scenarios in the future, the load position and critical load level to cause serious damage to the bridge could be identified. The scenario-based assessment process employed in this study is expected to facilitate the evaluation of bridge structures under aircraft impact in both existing bridges and future designs.