• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.183-193
• /
• 2012

In this study, the S University's energy usage, greenhouse gas emissions situation and potential reduction amount were analyzed using a long-term energy analysis model, LEAP. In accordance with the VISION 2020 and university's own improvement plans, S University plans to complete a second campus through expansion constructions by 2020 and by allocating the needed land. Accordingly, increases in energy usage and greenhouse gas emissions seem inevitable. Hence, in this study, the calculations of potential reduction amount by 2020 were attempted through the use of LEAP model by categorizing the energy used based on usage types and by proposing usage typebased reduction methods. There were a total of 4 scenarios: a standard scenario that predicted the energy usage without any additional energy reduction activity; energy reduction scenario using LED light replacement; energy reduction scenario using high efficiency building equipment; and a scenario that combines these two energy reduction scenarios. As scenario-based results, it was ascertained that, through the scenario that had two other energy reduction scenarios combined, the 2020 greenhouse gas emissions amount would be 14,916 tons of $CO_2eq$, an increase of 43.7% compared to the 2010 greenhouse gas emissions amount. Put differently, it was possible to derive a result of about 23.7% reduction of the greenhouse gas emissions amount for S University's greenhouse gas emissions amount through energy reduction activities. In terms of energy reduction methods, changing into ultra-high efficiency building equipment would deliver the most amount of reduction.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.172-183
• /
• 1994

In the multidatabase systems(MDBS), local autonomy and global consistency are important issues. Global consistency could be maintained by a global concurrency control algorithm and a global recovery algorithm. In this thesis, we propose a global concurrency control algorithm to ensure local autonomy and to guarantee global serializability, and a global recovery algorithm which is possible to recover the multudatabase from any failures. The proposed global concurrency control algorithm uses bottom-up approach, based on three-level transaction processing model. It can produce a local history that the execution order of subtransactions is identical to their serialization order by using dummy-operations in the server when an indirect conflict is caused between subtransactions due to local transactions. At the global module, it can efficiently validate global serializability of global transactions by checking global serializability only for the global transactions which conflict with each other.

• Journal of Distribution Research
• /
• v.6 no.2
• /
• pp.41-64
• /
• 2002

Since its market opening in the year 1996, Korea's retail sector has witnessed the emergence of various new retail formats such as discount stores and Internet shopping malls. Given the competition among various retail formats, it is needed to analyze the previous trends and to measure the future potential of the market with more careful economic models. Using Time Series Analysis on Korean economy and distribution industry, we aim to economic models to follow the trends and to measure the future growth of competing retail formats such as department stores, discount stores and convenience stores. We have found that the growth of department stores, convenience stores and specialty store format is very closely related with the private consumption expenditure. On the other hand, private consumption expenditure is not a good variable to explain the growth of discount stores and the supermarket sector. Following an extensive data analysis, three year forecasting of Korean distribution market including six different retail sectors is proposed. In addition, several discussion points including statistical classification of retail formats are argued.

• Nutrition Research and Practice
• /
• v.11 no.5
• /
• pp.419-429
• /
• 2017

BACKGROUND/OBJECTIVES: The relationship between folate and colorectal neoplasia remains controversial. We examined the association between serum folate concentrations and colorectal adenomas in a case-control study of Korean adults and conducted a meta-analysis. SUBJECTS/METHODS: Our case-control study included 113 pairs of case and control who underwent colonoscopy and provided blood samples. We used multivariable conditional logistic regression models to obtain the odds ratios and 95% confidence interval (CIs). For meta-analysis, we identified the relevant studies by searching the PubMed database up to February 2017, included our case-control study and combined the study-specific relative risks (RRs) using a random-effects model. RESULTS: In this case-control study, we included 58 men and 55 women with colorectal adenomas and sex and fasting status matched the controls. We did not find any significant association between the serum folate levels and colorectal adenomas in either men or women. For meta-analysis, a total of eleven studies were included in our analysis and classified into two groups; polyp clearance group (PC) for the studies that included participants who underwent endoscopies and had their polyps removed at baseline; and no polyp clearance group (NPC) for the studies that included participants whose histories of endoscopies were unknown or who underwent their first endoscopies. Four PC (1,311 cases and 1,672 non-cases) and eight NPC studies (3,501 cases and 11,347 non-cases) were included. The combined RRs (95% CIs) comparing the bottom with the top categories of circulating folate levels were 1.07 (0.97-1.18) for the NPC group but 1.45 (1.16-1.74) for the PC group. CONCLUSIONS: Low circulating folate levels were associated with new adenoma formation.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.378-391
• /
• 2011

In this paper, we suggest a novel method of selecting visual information based on bottom-up visual attention of human. We propose a new model that improve accuracy of detecting attention region by using depth information in addition to low-level spatial features such as color, lightness, orientation, form and temporal feature such as motion. Motion is important cue when we derive temporal saliency. But noise obtained during the input and computation process deteriorates accuracy of temporal saliency Our system exploited the result of psychological studies in order to remove the noise from motion information. Although typical systems get problems in determining the saliency if several salient regions are partially occluded and/or have almost equal saliency, our system is able to separate the regions with high accuracy. Spatiotemporally separated prominent regions in the first stage are prioritized using depth value one by one in the second stage. Experiment result shows that our system can describe the salient regions with higher accuracy than the previous approaches do.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.21-27
• /
• 2008

Triangular structure is used as basic shape of artificial structures for generating the upwelling current in order to make rich fishing ground at sea. Artificial upwelling current could bring the deep sea water containing a lot of nutrients from the bottom up to the surface. The purpose of this study is to examine the flow characteristics around underwater triangular structure with various stratification parameter. An experimental study was carried out for the triangular structure model in the circulating water channel to investigate flow characteristics by flow visualization method. A velocity fields around the underwater structure were measured by particle image velocimetry(PIV). The experimental results showed that the upwelling effect at the back and upper region of the structure could be best when the water depth was 2 times of the structure height and the stratification parameter was approximately 3.0. These quantitative data will be useful to determine the functional efficiency cf artificial upwelling structures.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.31-36
• /
• 2009

In this paper, the laser cutting characteristics of the flexible PCB using high power Nd:YAG UV laser were investigated. A specific FPCB model was selected for the experiment. Test sheets were made, which had equal materials and layer structure to those of the outline (OL) region and the contact pad (CP) region in the FPCB. The experiment is made up of two stages. In the first stage of the experiment, the laser cutting fluence was found, which is the threshold fluence to cut the test sheets completely. The laser cutting fluence of the OL sheet is $1781.26{\sim}1970.16\;J/cm^2$ and that of the CP sheet is $2109.34{\sim}2134.34\;J/cm^2$. In the second stage, cutting performance and its qualities were analyzed by the experiment. The laser cutting performance remained almost unchanged for all laser and process parameter sets. The average cutting width (top side/bottom side) of the OL sheet was $40.45\;{\mu}m/11.52\;{\mu}m$ and that of the CP sheet was $22.14\;{\mu}m/10.93\;{\mu}m$. However, the laser cutting qualities were different according to the parameters. The adjacent region of the cutting line on the OL sheet was carbonized as the beam speed was low and the overlap coefficient was high. The surface quality around the cutting line of the CP sheet was about the same. Carbonization and debris occurred on the surface of the cutting line. As a result of the experiment, the cutting qualities were better as the overlap coefficient was made low and beam speed high. Therefore, the overlap coefficient 2 or 3 is proper for the FPCB laser cutting.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.171-179
• /
• 2002

STEP-NC is the next generation CNC controller taking STEP-based data model as the interface scheme (or language) between CAM and CNC, and carrying out various intelligent functions. At the moment, efforts are being made worldwide to establish international standard for the new interface scheme formalized as ISO14649. As the new language is being established, increasing attention is being paid to the development of the new CNC. Korea STEP-NC is an integrated STEP-NC system taking ISO 14649 as an input, and carrying out various intelligent functions. It is composed of 5 modules: 1) Shop Floor Programming System (PosSFP), 2) Tool Path Generator (PosTPG), 3) Tool Path Viewer (PosTPV), 4) Man Machine Interface (PosMMI), and 5) CNC Kernel (PosCNC). Distinguished from other prototypes (of Europe and USA), the Korea STEP-NC is top-down designed, and bottom-up implemented comprehensively incorporating all the crucial components for realizing the full benefit of STEP-NC paradigm, without using any existing commercial CAD/CAM systems and CNC kernels. The Korea STEP-NC prototype was successfully demonstrated and evaluated in the ISO conventions Together with prototypes of Europe and USA, Korea STEP-NC will be used as a reference system fur the Triangular Conformance Test to be jointly carried out by ISO TC184 SC1, SC4, and IMS Project.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.51-68
• /
• 2020

Korea's general rural development projects, which has shifted its paradigm to a bottom-up approach, should be promoted in the direction of focusing on the subjective well-being of the residents in rural areas. This study analyzed the effect that a general rural development project impact on the subjective well-being of the residents and the village leader in the relationship the spirituality of leadership, the village's social capital to analyze the impact any general rural areas, attributed the success of development projects with diversified.. The results are as follows: First, the basic living-based projects among general agricultural fishing village development projects have positive effects on the subjective welfare of the residents. Second, it was found that the basic living-based projects and regional income raising projects in general agricultural fishing village development projects had a positive effect on the altruistic behaviors and beliefs of spiritual leadership. Third, as a result of analyzing the effect of the level of general farming and fishing village development on social capital, regional income raising projects have a positive effect on the formation of social capital such as trust and network. Finally, as a result of analyzing the influence of social capital on subjective well-being, it was found that social capital such as trust and network has a positive effect on the subjective well-being of rural residents. In future research, it is required to select more extended research subjects not limited to residents of limited areas, and conduct repeated studies, with expanding the model to include the important variables that affect the subjective well-being of the residents.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.3
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.