• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.163-171
• /
• 2021

Conventional white light-emitting diodes (LEDs) for lighting applications consist of blue LEDs and yellow phosphors, the spectrum of which lacks deep red. To improve the color-rendering characteristics of white LEDs, a red quantum-dot film was applied to the diffuser plate of LED lighting. The mean free paths of the quantum dots and the concentration of the TiO₂ particles in the diffuser plate were adjusted to optimize the optical structure of the lighting. The color-rendering index (CRI) was greater than 90 for most conditions, which demonstrates that adoption of the red quantum-dot film is an effective way for improving the color-rendering properties of conventional white LEDs. The angular dispersion of color coordinates could be removed by utilizing the optical cavity formed between the diffuser plate and the reflector on the bottom of the lighting, where multiple passages of the light through the quantum-dot film reduced the differences in optical path length depending on the viewing angle.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.400-421
• /
• 2019

This study was conducted to find out the seasonal distribution characteristics of meiobenthic communities to understand the benthic ecosystem of Gwangyang Bay, one of the representative bays in the southern coast of Korea. The faunal sampling was conducted eight times seasonally at 20 stations from 2010 to 2011. Among the meiobenthic fauna that appeared during the study period, the nematodes and harpacticoids were the most dominant. In the summer of 2011, the lowest density ($13ind.10m^{-2}$) was seen at station 10 on the inner part of the bay. In the winter of 2011, the highest density ($3,109ind.10m^{-2}$) was seen at station 4 on the inner part of the bay. Although the trend of seasonal changes in density was not clear, the meiobenthic community was seen to be affected more by the environmental factors in each season. Particularly, while the density of the harpacticoids, a dominant faunal group, showed negative correlations with the organic content and average particle size in the summer sediments (p<0.05, p<0.01), the density of the nematodes showed no significant correlation with the environmental factors except with the winter average particle size and the bottom layer's water temperature. The density change of meiobenthos showed irregular changes in Gwangyang Bay, instead of a general trend showing a low density in winter due to low water temperature but an increased density in spring and summer when the water temperature rises and a decreased one again in fall. Considering such a seasonal trend, it seems that the benthic ecosystem of Gwangyang Bay is affected more by artificial environmental factors than by natural environmental ones.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.659-662
• /
• 2018

We report the properties of infrared photodetectors based on two kinds of quantum dots(QDs): i) 2.0 ML InAs QDs by the Stranski-Krastanov growth mode(SK QDs) and ii) sub-monolayer QDs by $4{\times}[0.3ML/1nm\;In_{0.15}Ga_{0.85}As]$ deposition(SML QDs). The QD infrared photodetector(QDIP) structure of $n^+-n^-(QDs)-n^+$ is epitaxially grown on GaAs (100) wafers using molecular-beam epitaxy. Both the bottom and top contact GaAs layers are Si doped at $2{\times}10^{18}/cm^3$. The QD layers are grown with Si doping of $2{\times}10^{17}/cm^3$ and capped by an $In_{0.15}Ga_{0.85}As$ layer at $495^{\circ}C$. The photoluminescence peak(1.24 eV) of the SML QDIP is blue-shifted with respect to that (1.04 eV) of SK QDIPs, suggesting that the electron ground state of SML QDIP is higher than that of the SK QDIP. As a result, the photoresponse regime(${\sim}9-14{\mu}m$) of the SML QDIP is longer than that (${\sim}6-12{\mu}m$) of the SK QDIP. The dark current of the SML QDIP is two orders of magnitude smaller value than that of the SK QDIP because of the inserted $Al_{0.08}Ga_{0.92}As$ layer.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.471-478
• /
• 2018

The purpose of this study was to investigate effects of reusable organic wastes, on soil organisms and chemical properties. Bone meal, de-oiled cake, and oyster shell were applied and abundances of soil organisms were measured at 3 and 15 months, after treatment in soil under sawleaf zelkova cultivation. Soil organisms are affected, by the quality of applied organic wastes. Abundance of microorganisms was higher in oyster shell treated soils than in untreated soils, suggesting that soil pH is a driving force, altering abundance and structure of the microbial community. Increase in abundance of bacterivorous nematodes was observed under treatment with bone meal and de-oiled cake, but there was slight change in abundance of fungivorous and herbivorous nematodes. Abundance of herbivorous nematode was positively correlated with plant growth, at 15 months after treatment. Response of microarthropods in the Collembola and Oribatida was not apparent. Abundances of primary consumers were not significantly correlated with microorganisms. This study suggested that organic waste influences soil organisms primarily by altering soil chemical properties and bottom-up effects may not occur in trophic reactions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.143-149
• /
• 2019

In this study, a U-shape composite beam was developed to be effectively used for a steel parking lot which is 8m or lower in height. When the U-shape composite beam was applied to a steel parking lot, essential considerations were story-height and long-span. In addition, due to the mixed structural system with reinforced concrete and steel material, the U-shape composite beam needed to have a structural integrity and reliable performance over demand capacity. The main objective of this study was to investigate the performance of the structure consisting of the reinforced concrete (RC) slab and U-shape beam. A U-shape composite beam generally used at a parking lot served as a control specimen. Four specimens were tested under four-point bending. To calculate theoretical values, strain gauges were attached to rebar, steel plate, and concrete surface in the middle of the specimens. As the results, initial yielding strength of the control specimen occurred at the bottom of the U-shaped steel. After yielding, the specimen reached the maximum strength and the RC slab concrete was finally failed by concrete crush due to compressive stress. The structural performance such as flexural strength and ductility of the specimen with the increased beam depth was significantly improved in comparison with the control specimen. Furthermore, the design of the U-shape composite beam with the consideration of flexural strength and ductility was effective since the structural performance by a negative loading was relatively decreased but the ductile behavior was evidently improved.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.551-557
• /
• 2020

This study surveyed the ecological characteristics of Ladislabia taczanowskii at Songcheon Stream from March to November 2019. The species inhabited upstream, where the riverbed structure was mostly covered with boulders and cobbles. The water depth was 31-148 cm, and the stream velocity was fast at 0.94±0.23 (0.51-1.39) m/sec. The gender ratio of females to males was 1 : 0.89. The age according to the total length frequency distribution indicated that the group with 38-70 mm below in total length was one year old, the group with 70-100 mm was two years old, the group with 100-120 mm was three years old, and the group over 120-128 mm was over four years old. The total length of sexually mature fishes was 70 mm for females and 75 mm or more for males. The spawning season was from May to August, and the water temperature was 15.5-20.1℃ during the period. The prosperous spawning season was from June to July, and the water temperature was 15.8-17.2℃ during the period. The spawning ground was where the riffle began in the pool, and its bottom was formed of sand and gravel. The width was about 150 cm, and the water depth was 20 to 50 cm. The average number of eggs in the ovaries was 821 (401-1,314) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 1.62±0.02 (1.43-2.01) mm. The live foods of L. taczanowskii Cyanophyta, Chlorophyta, Bacillariophyta, Ephemeroptera, and Diptera. The feeding habit of L. taczanowskii is omnivorous, but more than 90% of the stomach content was attached algae.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.11-16
• /
• 2021

Recently, three-dimensional (3D) cell culture systems, which are superior to conventional two-dimensional (2D) vascular systems that mimic the in vivo environment, are being actively studied to reproduce drug responses and cell differentiation in organisms. Conventional two-dimensional cell culture methods (scaffold-based and non-scaffold-based) have a limited cell growth rate because the culture cannot supply the culture medium as consistently as microvessels. To solve this problem, we would like to propose a 3D culture system with an environment similar to living cells by continuously supplying the culture medium to the bottom of the 3D cell support. The 3D culture system is a structure in which microvascular structures are combined under a scaffold (agar, collagen, etc.) where cells can settle and grow. First, we have manufactured molds for the formation of four types of microvessel-mimicking chips: width / height ①100 ㎛ / 100 ㎛, ②100 ㎛ / 50 ㎛, ③ 150 ㎛ / 100 ㎛, and ④ 200 ㎛ / 100 ㎛. By injection molding, four types of microfluidic chips were made with GPPS (general purpose polystyrene), and a 100㎛-thick PDMS (polydimethylsiloxane) film was attached to the top of each microfluidic chip. As a result of observing the flow of the culture medium in the microchannel, it was confirmed that when the aspect ratio (height/width) of the microchannel is 1.5 or more, the fluid flows from the inlet to the outlet without a backflow phenomenon. In addition, the culture efficiency experiments of colorectal cancer cells (SW490) were performed in a 3D culture system in which PDMS films with different pore diameters (1/25/45 ㎛) were combined on a microfluidic chip. As a result, it was found that the cell growth rate increased up to 1.3 times and the cell death rate decreased by 71% as a result of the 3D culture system having a hole membrane with a diameter of 10 ㎛ or more compared to the conventional commercial. Based on the results of this study, it is possible to expand and build various 3D cell culture systems that can maximize cell culture efficiency by cell type by adjusting the shape of the microchannel, the size of the film hole, and the flow rate of the inlet.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.113-124
• /
• 2019

In this study, the operational characteristics of a cam-type vegetable transplanter which usually used in domestic was analyzed and operating mechanism of a transplanting device was analyzed. The main components and power path of the transplanter were analyzed. The maximum and minimum control cycles according to the moving speed and the plant spacing were analyzed. 3D modeling and simulation were performed to derive the trajectory of the bottom end of the transplanting hopper and the plant spacing at the each operating condition. The simulation results were verified by the field tests. As main findings of this study, the transplanting device has one degree of freedom (DOF) which consist of 13 links, 17 rotating joints and 1 half joint, and each part has composite structure with cam and links. By continuous and repetitive motion of the structures of transplanting device, the transplanting hopper plants the seedling in the ground with a vertical direction, and the seedling was planted stably. The power is transmitted to the driving part and transplanting device from the engine, and the maximum and minimum plant spacing of the transplanting device were about 900 mm and 350 mm, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2020

A CFRP sheet has been applied as a structural reinforcement in the field, and various studies are conducted to evaluate the effect of CFRP sheets on reinforced concrete. Although many experiments were performed from previous studies, there are still limitations to analyze structural behaviors with various parameters in experiments directly. This study shows the FEA on structural behaviors of RC beams reinforced with CFRP sheets using ABAQUS software. To simulate debonding failure of CFRP sheets which is a major failure mode of RC beam with CFRP sheets, a cohesive element was applied between the bottom surface of RC beam and CFRP sheets. Both quasi-static method and 2-D symmetric FE model technique were performed to solve nonlinear problems. Results obtained from the FE models show good agreements with experimental results. It was found that reinforcement level of CFRP sheets is closely related to structural behavior of reinforced concrete including maximum strength, initial stiffness and deflection at failure. Also, as over-reinforcement of CFRP sheets could give rise to the brittle failure of RCstructure using CFRP sheets, an appropriate measure should be required when installing CFRP sheets in the structure.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.33-42
• /
• 2022

In this study, flow patterns in the ice-harbor fishway were analyzed according to fluctuations of the upstream water level, an increase of weir interval, and the presence or absence of orifices using a three-dimensional commercial numerical model, Flow-3D. In order to prove the suitability of the numerical simulation results, the flow velocity and flow rate at the exit of the fishway were observed using a 3D ultrasonic velocimetry on an actual ice-harbor fishway installed downstream of the Daegok bridge in Gyeongan-Cheon. Four types of turbulence modules can be selected for the Flow-3D model. As a result of verification with observation data, the RNG model best described the flow characteristics in the ice-harbor fishway. The velocity structure in the fishway according to fluctuations of the upstream water level was simulated. The results showed that the plunging flow and the streaming flow were mixed at the lowest water level. When the water level increased about 10 cm or more from the lowest water level, the plunging flow disappeared in all pools and only the streaming flow occurred. Contrary to expectations, even when the water level is rose a little, the flow simply occurred mainly on the streaming flow. If the interval between the weirs is increased, both the plunging flow and the streaming flow are showed continued even if the water level rises. In addition, compared to the case where there are no orifices at the bottom of the weirs, the plunging flow tends to be generated in several pools. It is necessary to prevent blocking orifices through active management so that various flow patterns in the fishway can be generated in multiple pools.