• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.1
• /
• pp.20-31
• /
• 2018

Marine parasitoid Amoebophrya infects and kills various bloom-forming dinoflagellates and strongly influences the harmful algal bloom dynamics. We investigated the effect of temperature on survival, infectivity, generation time of the parasite from the parasitoid Amoebophrya sp. and the harmful dinoflagellate host Akashiwo sanguinea system. Temperature had a significant effect on the parasite generation time and infectivity. While the lower temperature ($15^{\circ}C$) arrested parasite intracellular development and infectivity, resulting in the longer generation time ($115{\pm}0.1h$), the higher temperatures ($25^{\circ}C$ and $20^{\circ}C$) accelerated the parasite development, with the generation times of $58{\pm}0.1h$ and $83{\pm}0.1h$, respectively. Parasite prevalence (percent of host infected) was $71.5{\pm}0.30%$, $54.3{\pm}1.68%$, and $29.6{\pm}1.42%$ at $25^{\circ}C$, $20^{\circ}C$, and $15^{\circ}C$, respectively. These results suggest that biological control by parasitism on A. sanguinea bloom would not be highly effective during low water temperature season. Further, water temperature would be an important factor of bottom-up controls for the host-parasite population dynamics.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.637-648
• /
• 2005

Innovative prestressed steel plate girders were presented in this study. Hot-rolled H beams were loaded first, then relatively high-strengthsteel plates were welded on the top and bottom flanges of preloaded H beams. Finally, high prestressed plate (HiPP) girder was manufactured by simply releasing prestresses of rolled beams. To verify prestress distributions induced in this girder, the experimental study was conducted and some guidelines to manufacture these girders effectively were addressed. In addition, methods to determine the allowable bending stress of HiPP girders and to check welding stresses were addressed for design of temporary bridges. The efficiency and effectiveness of the present girder were demonstrated through design examples of temporary bridges adapting the prestress-induced girder or the plate girder of the same section without prestresses. As a result, it has been found to be possible that the span length of HiPP girders for temporary bridges is longer than that of girders without prestresses.

• Journal of Magnetics
• /
• v.7 no.3
• /
• pp.63-71
• /
• 2002

Three fabrication techniques for forming thin barrier layer with uniform thickness and large barrier height in magnetic tunnel junction (MTJ) are discussed. First, the effect of immiscible element addition to Cu layer, a high conducting layer generally placed under the MTJ, is investigated in order to reduce the surface roughness of the bottom ferromagnetic layer, on which the barrier is formed. The Ag addition to the Cu layer successfully realizes the smooth surface of the ferromagnetic layer because of the suppression of the grain growth of Cu. Second, a new plasma source, characterized as low electron energy of 1 eV and high density of $10^{12}$ $cm^{-3}$, is introduced to the Al oxidation process in MTJ fabrication in order to reduce damages to the barrier layer by the ion-bombardment. The magnetotransport properties of the MTJs are investigated as a function of the annealing temperature. As a peculiar feature, the monotonous decrease of resistance area product (RA) is observed with increasing the annealing temperature. The decrease of the RA is due to the decrease of the effective barrier width. Third, the influence of the mixed inert gas species for plasma oxidization process of metallic Al layer on the tunnel magnetoresistance (TMR) was investigated. By the use of Kr-O$_2$ plasma for Al oxidation process, a 58.8 % of MR ratio was obtained at room temperature after annealing the junction at $300{^{\circ}C}$, while the achieved TMR ratio of the MTJ fabricated with usual Ar-$0_2$ plasma remained 48.4%. A faster oxidization rate of the Al layer by using Kr-O$_2$ plasma is a possible cause to prevent the over oxidization of Al layer and to realize a large magnetoresistance.

• Particle and aerosol research
• /
• v.10 no.2
• /
• pp.83-91
• /
• 2014

Since airborne bacteria have been known to aggravate indoor air quality, studies on reducing bacteria particles increase recently. In this study, a chamber(0.8m x 0.8m x 1.56m) system was built in order to simulate real conditions for reducing airborne bacteria, and evaluated by a simple aerosol reduction test. A method utilizing CFD(Computational Fluid Dynamics) simulation was used to detect the horizontal cross-sectional area which represents particle distribution in the chamber. Then an air-cleaner with HEPA filter and Carbon Fiber Ionizer was located on that area for aerosol reduction test. The CFD result found the area was located at 0.2m height from the bottom of the chamber, and the test showed aerosol reduction efficiencies using measurements of number concentration and CFU(colony forming unit) per each case. At the measurement of number concentration, the reduction efficiency of air-cleaner with filter and ionizer(Case 3) was about 90% after 4 minutes from the stop of the bacteria injection, and that with only filter(Case 2) was about 90% after 8 minutes from the beginning. Lastly, that without filter and ionizer(Case 1) was about 30% after 10 minutes. At the measurement of CFU, it shows similar results but it is related to viability of bio-aerosol.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.119-128
• /
• 2012

The applicability and accuracy of Revised Universal Soil Loss Equation (RUSLE) model on the estimation of soil loss at impacted area of shooting range was tested to further the understanding of soil erosion at shooting ranges by using RUSLE. At a shooting range located in northern Kyunggi, the amount of soil loss was estimated by RUSLE model and compared with that estimated by Global Positioning System-Total Station survey. As results, the annual soil loss at a study site (202 m long by 79 m wide) was estimated to be 2,915 ton/ha/year by RUSLE and 3,058 ton/ha/year by GPS-TS survey, respectively. The error between two different estimations was less than 5%, however, information on site conditions should be collected more to adjust model coefficients accurately. At the study shooting range, sediments generated by rainfall was transported from the top to near the bottom of the sloping face through sheet erosion as well as rill erosion, forming a gully along the direction of the storm water flow. Coarser fractions of the sediments were redeposited in the limited area along the channel. Distribution characteristics of explosive compounds in soil before and after summer monsoon rainfall in the study area were compared with the erosion patterns. Soil sampling and analyses results showed that the dispersion of explosive compounds in surface soil was consistent with the characteristics of soil erosion and redeposition pattern of sediment movements after rainfalls.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.4
• /
• pp.11-19
• /
• 2008

The layer technique is to produce many memorable scenes by generating layers of new experiences on the existing ones as it is adding the cognitive layers on to the visually seen landscape. Its need is high for places whose landscape itself influences perception, value or expression and which determines the spatial and quality standards. The existing floor plan-based design methods have failed to be useful in generating complex visual experiences. In order to maximize the aesthetical landscape experiences in landscape planning, cognitive layers are needed which complement the input of adequate cognitive elements and the inter-element relationships. Here, layers are utilized to change the arrangement of the landscape elements and coordinate the cognitive flow so that the images could be connected and imagination could occur. A case in point is Anhyun Village in Gochang where physically distinctive layers are additionally set to make a visual experience enriching. The new landscape layers discover the fact that it provides diversity in experiencing the village landscape and forming the sense of beauty and that it is deeply immersed into the daily life of the village. Meanwhile, Guwau Village in Taebaek is an example showing the usefulness of various-layer setting in landscape planning in setting effective circulation planning. That is, the bottom line is the spacing-starting where and making it stay where for a few seconds, and the visual layers. It is also critical to encourage inducing circulation so that layers of the senses stimulating five senses could intervene. Lastly, Mulgeon-ri in Namhae is a case which directly made a parallel of the physical layers of the landscape composition and the cognitive layers of the landscape experience. Artificial landscape planning is mostly about manipulating of visual traits that people feel beautiful, but the layer technique is linked to how to make experiences enriching and renewed.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.1-19
• /
• 2011

The physical and chemical characteristics of loess-paleosol sequence in Jeongjang-ri, Geochang basin are examined using the magnetic susceptibility measurement, grain size analysis, OSL age dating, major, rare earth and trace elements analysis. The grain size characteristics of the loess-palesol sequence are obviously different from those of river sediment forming river terrace deposits and the Chinese Loess Plateau. The loess-paleosol sequence consisting of L1, L1LL1, L1S1, L1L2, S1 and L2 from top to bottom is estimated to MIS 2~MIS 6 and the river terrace to MIS 7. The compositions of major, rare earth and trace elements indicate that the sequence show more weathered characteristics than the Chinese Loess Plateau and originated from the Chinese Loess Plateau. These features are in harmony with the previous studies in Korea.

• 한국해양학회지
• /
• v.16 no.1
• /
• pp.31-37
• /
• 1981

Saline water movements in relation to tidal condition and river discharge in the estuary of the Nakdong River are discussed on the basis of the observation data. The difference of salinity between the surface and the bottom layer was 1∼3 at spring tide forming a vertically homogeneous estuary, while at neap tide, it ranges up to 7∼15 indicating a sharp salt wedge. The maximum salinity appeared approximately at an hour after the high water, that is, three hours after the landward velocity maximum, while the salinity maximum at around an hour after the low water, that is, three hours after the seaward velocity maximum. The density current speed at a section located 10km landward from the river mouth was observed approximately to be 45cm sec$\^$-1/ at 8m layer.The relations between the salinity at Gupo and the river discharge at Jindong are estimated by means of the least square method. The maximum length of the salt wedge is calculated approximately to be 22km at neap tide and 16km at spring tide, which is in accordance with the observed data. The salinity influence area is deduced to be 45km at spring tide and 35km at neap tide. The diffusion coefficient of salinity was estimated approximately to be 1.5 10$\^$8/$\textrm{cm}^2$ sec$\^$-1/ at Samrak and 8 10$\^$5/$\textrm{cm}^2$ sec$\^$-1/ at Gupo at neap tide, while it was 1.4 10$\^$7/$\textrm{cm}^2$ sec$\^$-1/ at Dongwon at spring tide.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.190-198
• /
• 2013

In order to predict acoustic pressure distributions by exterior incident wave at Cylindrical Hydrophone Array (CHA) sensor's positions, acoustic pressure analysis is performed by using beam tracing method. Beam tracing method is well-known of reliable pressure analysis methods at high-frequency range. When an acoustic noise source is located at the center of rectangular room, acoustic pressure analysis is performed by using both beam tracing method and Power Flow Boundary Element Method (PFBEM). By comparing with results of beam tracing method and those of PFBEM, the accuracy of beam tracing method is verified. We develop the CHA pressure analysis program by verified beam tracing method. The developed software is composed of model input, sensor array creator, analysis option, solver and post-processor. We can choose a model option of 2D or 3D. The sensor array generator is connected to a sonar which is composed of center position, bottom, top and angle between sensors. We also can choose an analysis option such as analysis frequency, beam number, reflect number, etc. The solver module calculates the ray paths, acoustic pressure and result of generating beams. We apply the program to 2D and 3D CHA models, and their results are reliable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.1-7
• /
• 2016

A range of techniques have been being developed to remove the volatile organic compounds from paining processes. High temperature decomposition of harmful VOCs using arc plasma has recently been proposed, and this work analyzed the extreme hot process by computer-aided fluid dynamics prior to the reactor design. Numerical simulations utilized the conservation equations of mass and momentum. The simulation showed that the fluid flowed down along the inner surface of the centrifugal reactor by forming intensive spiral trajectories. Although the high temperature gas generated by plasma influences the bottom of the reactor, no heat transfer in radial direction appeared. The decomposition efficiency of a typical VOCs, toluene, was found to be a maximum of 67% across the reactor, which was similar to the value (approximately 70%) for the lab-scale test.