• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.847-862
• /
• 1999

본 논문에서는 유한버퍼의(finite-buffered) 동기화된(synchronous) 큐잉모델(queueing model)을 이용하여 명령어들간의 병렬성, 분기명령의 빈도수, 분기예측(branch prediction)의 정확도, 캐쉬미스 등의 파라미터들을 고려하여 프로세서의 명령어 실행율을 예측하며 캐쉬의 성능과 파이프라인 성능간의 관계를 분석할 수 있는 새로운 해석적 모델을 제안하였다. 해석적 모델은 모델의 타당성을 검증하기 위해서 시뮬레이션을 수행하여 얻은 결과와 비교하였다. 해석적 모델과 시뮬레이션을 비교한 결과 대부분 10% 오차 내에서 일치하였다. 본 연구를 통하여 얻은 해석적 모델을 사용하면 시뮬레이션에서는 드러나지 않는 성능제약의 원인에 대한 명확한 규명이 가능하기 때문에 성능향상을 위한 설계자료를 얻을 수 있으며, 시스템 성능 밸런스를 위한 캐쉬와 비순차이슈 파이프라인 성능간의 관계에 대한 정확한 분석이 가능하다.Abstract This research presents a novel analytic model to predict the instruction execution rate of superscalar processors using the queuing model with finite-buffer size and synchronous operation mode. The proposed model is also able to analyze the performance relationship between cache and pipeline. The proposed model takes into account various kinds of architectural parameters such as instruction-level parallelism, branch probability, the accuracy of branch prediction, cache miss, and etc.. To prove the correctness of the model, we performed extensive simulations and compared the results with the analytic model. Simulation results showed that the proposed model can estimate the average execution rate accurately within 10% error compared to simulation results. The proposed model can explain the causes of performance bottleneck which cannot be uncovered by the simulation method only. The model is also able to show the effect of the cache miss on the performance of out-of-order issue superscalar processors, which can provide an valuable information in designing a balanced system.

• The Korean Journal of Malacology
• /
• v.29 no.3
• /
• pp.197-205
• /
• 2013

Even though seedling production of Haliotis discus hannai has fully developed, the culture of benthic diatom as a live food for larvae is still a barrier to solve in commercial hatchery. The farmer depends on mixed microalgae which are non-selectively attached on the plate by flowing of natural seawater. The adequate diatom on the plate for the larvae in terms of quality and quantity is always significant bottleneck in the hatchery. In this study, two benthic diatom species, Caloneis schroederi and Rhaphoneis sp. were separately cultured in mass and inoculated to four tons' settlement tank of the larvae. And the larvae and the spats were cultured for nineteen and nine weeks, respectively. The result on seedling production of H. discus hannai with this method was compared to that of the farmer's traditional method as a control. With regard to variation of species composition of benthic diatom on the plate, C. schroederi and Rhaphoneis sp. were dominant for first three weeks after inoculation. But the diverse diatoms mainly, Navicula, Amphora, Cylindrotheca, Licmophora, Pleurosigma began to attache on the plate from the 4th week. The larvae attached 2.5 times more in C. schroederi tank than in the control tank. The final total biomass of the seeds in Rhaphoneis sp. tank was 3.2 times more than that of the control tank. The retared-spats in the seedling production also showed significantly higher growth and survival in the spat fed Rhaphoneis sp. or C. schroederi than those in the control group. We suggest that C. schroederi is proper for settlement of the larvae and Rhaphoneis sp. is appropriate for the growth of the larvae and spats in the commercial hatchery of H. discus hannai.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.28-33
• /
• 2021

With the recent growing interest in eco-friendly cars, as interest in eco-friendly cars increases, interest and purchase of hydrogen fuel cell vehicles that do not emit pollutants are increasing. Recently, the government is supporting the expansion of hydrogen charging station and localization of core parts according to the government's hydrogen energy dissemination policy. In this study, the flow characteristics of the hydrogen flow control valve were investigated. As the differential pressure increases, the mass flow rate and flow coefficient tend to be different from the volume flow rate. And it was confirmed that it affects the hydrogen temperature due to the nozzle effect in the bottleneck section, and the change in density affects the mass flow rate.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.57-64
• /
• 2021

The domestic semiconductor industry can produce various products that will satisfy customer needs by diversifying assembly parts and increasing compatibility between them. It is necessary to improve the production line as a method to reduce the work-in-process inventory (WIP) in the assembly line, the idle time of the worker, and the idle time of the process. The improvement of the production line is to balance the capabilities of each process as a whole, and to determine the timing of product input or the order of the work process so that the time required between each process is balanced. The purpose of this study is to find the optimal WIP and buffer size through SA (Simulated Annealing) that minimizes lead time while matching the number of two parts in a parallel assembly line with bottleneck process. The WIP level and buffer size obtained by the SA algorithm were applied to the CONWIP and DBR systems, which are the existing production systems, and the simulation was performed by applying them to the new hybrid production system. Here, the Hybrid method is a combination of CONWIP and DBR methods, and it is a production system created by setting new rules. As a result of the Simulation, the result values were derived based on three criteria: lead time, production volume, and work-in-process inventory. Finally, the effect of the hybrid production method was verified through comparative analysis of the result values.

• Geomechanics and Engineering
• /
• v.36 no.6
• /
• pp.575-587
• /
• 2024

The contact pressure between the surrounding rock and the support is an important indicator of the surrounding rock pressure. There has been a bottleneck in the prediction of contact loads between surrounding rock and primary support in deep-buried mountain tunnels. The main reason is that a reliable method wasn't existed to quantify the contact loads. This study had been taken into account the flexible support role of the primary support, and the fitting curve of surrounding rock deformation for dynamic tunnel construction was proposed. New formulas for the calculation of contact loads between surrounding rock and primary support were obtained by inversion. Comparative analysis of the calculation results with numerical simulation verified the reliability of the calculation method in this study. It can be seen from the analyses that the contact load between surrounding rock and primary support increases, remains unchanged and decreases during acceleration, uniform velocity and deceleration, respectively, and the deformation of the surrounding rock in the acceleration and deceleration stages cannot completely converted into contact loads. The contact loads between surrounding rock and primary support of medium-strength and weak surrounding rock tunnels are generally within 150 kPa and 1 MPa, respectively. For tunnels with weak surrounding rock, advanced support can be installed to reduce the unique release coefficient λ₀ and the value of the constant D, with the purpose of reducing the contact loads between surrounding rock and primary support. Changes in support parameters have a small effect on the contact loads between surrounding rock and primary support, but increase or decrease the safety factor, resulting in a waste of resources or a situation that threatens the safety of the support. The results of this research provide guidance for the prediction of contact loads between surrounding rock and primary support for dynamic tunnel construction.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.516-526
• /
• 2004

Main-Memory DataBase(MMDB) system where all the data reside on the main memory shows tremendous performance boost since it does not need any disk access during the transaction processing. Since MMDB still needs disk logging for transaction commit, it has become another bottleneck for the transaction throughput and the commit protocol should be examined carefully. There have been several attempts to reduce the logging overhead. The pre-commit and group commit are two well known techniques which do not require additional hardware. However, there has not been any research to analyze their effect on MMDB system. In this paper, we identify the possibility of deadlock resulting from the group commit and propose the disk group commit protocol which can be readily deployed. Using extensive simulation, we have shown that the group commit is effective on improving the MMDB transaction performance and the proposed disk group commit almost always outperform carefully tuned group commit. Also, we note that the pre-commit does not have any effect when used alone but shows some improvement if used in conjunction with the group commit.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.478-487
• /
• 2015

This study proposed a Variable Speed Limits(VSL) algorithm to use traffic information based on Cumulative Demand-Capacity Analysis and evaluated its performance. According to the analysis result, the total of delay consisted of 3 separate parts. There was no change in total travel time although the total of delay decreased. These effects was analysed theoretically and then, evaluated through VISSIM, a microscopic simulator. VISSIM simulation results show almost same as those of theoretical analysis. Furthermore in SSAM analysis with VISSIM simulation log, the number of high risk collisions decreased 36.0 %. However, the total delay decrease effect is not real meaning of decrease effect because the drivers' desired speed is same whether the VSL model is operated or not. Nevertheless this VSL model maintains free flow speed for longer and increases the cycle of traffic speed fluctuation. In other words, this is decrease of delay occurrence and scale. The decrease of speed gap between upstream and downstream stabilizes the traffic flow and leads decrease number of high risk collision. In conclusion, we can expect increase of safety through total delay minimization according to this VSL model.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.2
• /
• pp.115-129
• /
• 2007

Using internal transcribed spacer (ITS) sequences and inter-simple sequence repeats (ISSRs) data, genetic diversity of a rare species, Hibiscus hamabo Siebold & Zucc. was examined for 3 populations in Jeju Island, Korea. A total of 14 nucleotide (excluding 3 ambiguous nucleotide) site variation in the ITS was observed from 18 individuals (Population 1, Hadori), which differed up to 13 bp in pair-wise comparison. On the contrary, the ITS sequences of all individuals in Populations 2 and 3 were identical. Genetic diversity estimates including Nei's gene diversity (h) generated by ISSR data were substantially high in Population 1 compared to other two populations. Low genetic variation in Populations 1 and 2 is considered due to genetic drift (bottleneck effect) and limited gene flow in these populations. Considering the differences in genetic diversity, protection of the Population 1(Hadori) is very critical for in situ conservation of Hibiscus hamabo in Korea. If ex situ conservation is required, making the full use of Population 1 will be most efficient.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 2002.09b
• /
• pp.5-56
• /
• 2002

The problems in the current domestic forage production were evaluated, and the prospective improvement was suggested in this paper. Grassland development in forest, production of high quality forages in upland and paddy land, efficient utilization of rice straw, development of new varieties of forages suitable for our environmental conditions and imported forages were described Among them, preferential production and utilization of forages using paddy field after rice harvest . should be enlarged for domestic supply of forages in Korea. Several studies were carried out to select the promising forage crops and barley cultivars for whole crop silage production, to determine productivity, nutritive value and production cost of forages produced in paddy field, and feeding effect of forages with Hanuwoo and milking cow for whole crop silage with forages produced in paddy field, 1999 to 2001, and also discussed restraint factors and activation plans for enlargement of forage production in paddy land. The promising forage crops in paddy field were rye and barley for Middle region, and rye, barley, early maturing Italian ryegrass and wheat for Southern region. The promising barley cultivars for whole crop silage in paddy field were Albori in Suwon, Keunalbori, Milyang 92, Saessalbori, and Naehanssalbori in Iksan, and Keunalbori, Albori, Naehanssalbori, and Saegangbori in Milyang, respectively. Silage production, quality and animal palatability of silage by trench and round bale were also compared. The production yields of whole crop barley silage(WBS) were 17,135kg as a fresh matter, and 6,011kg as a dry matter per ha, and the quality of WBS was 2∼3 grade, while that of rice straw silage was 4 grade as a farm basis. The production cost of WBS per kg was 83won as a fresh matter, and 238won as a dry matter. Feeding of WBS as forages on Hanwoo was very desirable for the improvement of live-weight gain, beef quality and farm income, particularly in growing stage of Hanwoo. Milk production and income were also increased, and feed cost was decreased by feeding of WBS. The daily voluntary intake of WBS in milking cow was 26.3kg as a fresh matter(DM 7.7kg) per head. Milk production when WBS was fed, was very similar to that of imported hay feeding such as Kentucky bluegrass or domestic corn silage. The issues to be solved in near future f3r stable forage production and supply in paddy land are sustainable livestock-forages policy, development & seed production of new varieties of barley, rye, Italian ryegrass and other promising forages, efficient demand & supply system of forages, solidification for mass production and utilization of forages, efficient application management of animal slurry on paddy field considering environmental agriculture/livestock industry, and break k development of bottleneck technique in production field. Domestic production & supply of high cost agricultural machine (round baler, wrapper, handler and so on), plastic wrapping film, and silage additives are also important.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.25-35
• /
• 1998

The control system architecture in switching systems have undergone numerous changes to provide various call processing capability needed in telecommunication services. During call processing in a distributed switching control environment, the delay effect due to communication among main processors or peripheral controllers is one of the limiting factors which affect the system performance. In this paper, we propose a performance model for an IPC(Inter Processor Communication) interface hardware block which is required on the ATM cell-based message processing in a distributed ATM exchange system, and analyze the primary causes which affect the processor performance through the simulation. Consequently, It can be shown that the local CPU of the several components(resources) related to the IPC scheme is a bottleneck factor in achieving the maximum system performance from the simulation results, such as the utilization of each processing component according to the change of the input message rate, and the queue length and processing delay according to input message rate. And we also give some useful results such as the maximum message processing capacity according to the change of the performance of local CPU, and the local CPU maximum throughput according to the change of average message length, which is applicable as a reference data for the improvement or expansion of the ATM control system.