• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1742-1747
• /
• 1991

Since inspection, ID-code recognition, and pattern match processes requiring vision depend upon the high-grade human recognition capability, these processes have conventionally caused a bottle-neck in automatizing sewing system. However, the authors have recently developed the technology of inspecting the surface defects of textiles and recognizing ID-code by fully utilizing the image processing technology. In the ID-code recognition technology, the most difficult data given on patterns can be read as a result of developing the image processing technology and eliminating noises by using a special (fluorescent) ink. The inspection and pattern match technology was verified to be able to put into practical use through evaluation experiments in an experimental plant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.698-701
• /
• 2005

Nowadays, because of the frequent market change and variable customer's requirements, product's life-circle is becoming shorter. So, automobile companies are forced to rapidly develop new products and efficiently reduce both manufacturing lead time and cost, with the world level quality. Among them, Press Die is not only just a bottle neck but also an important resource exerting certain effect in quality of car body appearance. Since 2000, due to efforts to reduce the time of design phase, many companies have used 3D design methods. Actually the method didn't reduce the period of design because the company didn't develop the best practice. This paper wish to solve this problem by modular based hybrid dies template.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.240-246
• /
• 2000

An in-process estimation of the ground surface roughness is a bottle-neck and an essential field in conventional grinding operation. We defined the dimensionless average roughness factor (D.A.R.F) that exhibits a roughness characteristics of ground surface. The D.A.R.F was composed easily of the absolute average and the standard deviation values which were the analytic parameters of the acoustic emission (AE) signal generated during the machining process. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.337-340
• /
• 1991

The most difficult, time-consuming, and expensive task in building an ES (Expert System) is constructing and debugging its knowledge base. Our goals are to eliminate the knowledge-acquisition bottle-neck for ES creation in data rich situations and to make an ANN (Artificial Neural Network) model behave as much as possible like an ES. The ANN ES has many benifits: Once it has been learned, inference time is very short. It can provide a reasonable conclusion for insufficient input data. But it has also several demerits : Learning time is too long to converge. We cannot guarantee the convergence of its weights. We introduce an ANN ES model which makes most of its benefits and compensates its shortcomings.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.28-35
• /
• 2000

For the merit of a container in transportation and cargo handling the amount of container freight has been continuously on the increase. On the other hand container crane had got the bottle neck in cargo handling due to low productivity so that freight congestion had been often occurred at ports. in this paper A mathematical model for container crane system is represented a method for designing a fuzzy controller of container crane system for high productivity in cargo handling is presented. The fuzzy controller is compared with other optimal controller at the same condition. in the computer simulation the fuzzy controller obtained an excellent response to reference change better than the optimal controller. For disturbance such as a strong storm and parameter change due to change of cargo weight the result was also stable and robust than the optimal controller.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.119-122
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of 1 vol.% carbon nanotube (CNT)-metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT-Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature. It was found by mechanical testing of the consolidated 1 vol.% CNT-Cu that high mechanical strength could be achieved effectively as a result of the Cu matrix strengthening and improved particle bonding during ECAP. The ECAP processing of powders is a viable method to achieve fully density CNT-Cu nanocomposites.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2007

One of the most important processes is the face milling in processing task. It makes the smooth surface of processed goods. In processing stage, the formation of burr is inevitable. The formed burr decreases a detailed drawing and effects the safety of workers. So, it causes a deburring process for removing and a bottle-neck condition. Therefore, the study which can minimize the generation of burr is needed. In this paper, complex feature, such as line, arc, circle, spline is studied more reality than any other papers. And also, the algorithm which can predict the path of generated burr is established. Moreover, the finality goal is that the system which can produce tool-path minimized has to be developed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.470-472
• /
• 1996

POSCO has a plan for facility expansion in plate mill by building No.3 Plate Mill. By No.3 Plate Mill's coming on line, POSCO' current plate production of 2.3 million tons will increase by over 1 million tons to 3.36 million tons (Currently, annual domestic demand for plates is 4.42 million tons). With the plan of facility expansion, POSCO also has the plan of integrating the Plate Warehouse. But, we came to have a question whether the roller table from the mill to the warehouse could carry extended products. Engineers working in the mill wanted to install transfer facility to reduce the load of the roller table, but the engineers in facility purchasing team didn't want to buy the new facility. So, We needed to analyzed the material flow by simulation. The simulation was done on the VAX system by SLAM II. And this project was done by two engineers for 2 months. In the end, we concluded that two transfer facilities are needed for material flow with no bottle neck point.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.47-55
• /
• 2016

Router main task is to provide routing of Internet Protocol (IP) packets. Routing is achieved with help of the IP lookup. Router stores information about the networks and interfaces in data structures commonly called as routing tables. Comparison of IP from incoming packet with the IPs stored in routing table for the information about route is IP Lookup. IP lookup performs by longest IP prefix matching. The performance of the IP router is based on the speed of prefix matching. IP lookup is a major bottle neck in the performance of Router. Various algorithms and data structures are available for IP lookup. This paper is about reviewing various tree based structure and its performance evaluation.