• Journal of Biomedical Engineering Research
• /
• 제26권1호
• /
• pp.43-47
• /
• 2005

We have developed a small bore x-ray CT for small animal imaging with a linear x-ray detector array and small-scale slip rings. The linear x-ray detector array consists of 1024 elements of 400□m×400□m with a gadolinium oxysulfide (GOS) scintillator on top of them. To avoid use of expensive large diameter slip rings for projection data transmission from the X­ray detector to the image reconstruction system, we used the wireless LAN technology. The projection data are temporally stored in the data acquisition system residing on the rotating gantry during the scan and they are transmitted to the image reconstruction system after the scan. With the wireless LAN technology, we only needed to use small-scale slip rings to deliver the AC electric power to the X-ray generator and the power supply on the rotating gantry. The performances of the small animal CT system, such as SNR, contrast, and spatial resolution, have been evaluated through experiments using various phantoms. It has been experimentally found that the SNR is almost linearly proportional to the tube current and tube voltage, and the minimum resolvable contrast is less than 30 CT numbers at 40kVp/3.0㎃. The spatial resolution of the small animal CT system has been found to be about 0.9Ip/㎜. Postmortem images of a piglet is also presented.

• Journal of the Korean GEO-environmental Society
• /
• 제18권9호
• /
• pp.11-18
• /
• 2017

Numerical analysis method for prediction of pile behaviour characteristics has widely been used in detail design process before construction because field static loading test requires high cost. However, the reliability verification of numerical analysis of result is not permitted compare with field test. In this study, to verify the numerical analysis results, pile behaviour prediction was compared with field static loading test results. For exact analysis of interaction between pile and ground, soil investigation and in-situ test such as boring, SPT and bore-hole shear test were performed before pile static loading test. During the static loading test, pile behaviour characteristics were analyzed under every loading condition. After static pile loading test, numerical analysis was carried out under same condition with static pile loading test. In the numerical analysis, to apply same loading condition with each loading condition in the field test and to compare with between the results of numerical analysis, the field test results for reliability were verified with the results of numerical analysis.

• Journal of Radiation Industry
• /
• 제9권3호
• /
• pp.143-151
• /
• 2015

A PET-MR system is particularly useful in diagnosing brain diseases. We have developed a prototype positron emission tomography (PET) system which can be inserted into the bore of a whole-body magnetic resonance imaging (MRI) system that enables us to obtain PET and MRI images simultaneously with a reduced cost. Silicon photomultipliers (SiPM) are appropriated as a PET detector at PET/MR system because detectors have a high gain and are insensitive to magnetic fields. Despite of its improved performance compared to that of PMT-based detectors, there is a problem of the photo-peak channel shift which is due to the increase of the temperature inside the ring detector. This problem will occur decreasing sensitivity of the PET and image distortion. In this paper, I quantitative analyze parameters of the KAIST SiPM depending on temperature by experiments. And I designed cooling methods in consideration of the degradation of sensors for correction of the temperature in the PET gantry. According to this research, we expect that distortive images and degradation of the sensitivity will not be occurred with using the above idea to reduce heat even if the PET system operates for a long time.

• Korean Journal of Remote Sensing
• /
• 제23권6호
• /
• pp.501-506
• /
• 2007

Basic research is conducted to identify a target using corner reflectors which are commonly used in calibration of synthetic aperture radar (SAR) systems. At first, an omni-directional reflector is fabricated by combining four 15-cm rectangular trihedral corner reflectors. Then, its radar cross section (RCS) characteristics are measured at C-band (5.3 GHz) for vv-, hh-, hv-, and vh- polarizations at a range of horizontal angle, $-90^{\circ}{\le}{\phi}{\le}90^{\circ}$. The measured RCS angular variation of the omni-directional reflector is much smaller for vv-polarization than other polarizations, and the difference between the maximum and minimum RCSs for vv-polarization is about 8 dB. Peak RCS values are shown at $0^{\circ}$ (normal to plates) and $45^{\circ}$ (direction of bore sight). It is shown that the measurements agree quite well with numerical simulation and theoretical computation results.

• Journal of Fashion Business
• /
• 제23권5호
• /
• pp.137-150
• /
• 2019

This study aimed to provide consumer perception and evaluation of natural Cynanchi Atrium Fermented Original Cosmetics for Skin Whitening that can improve skin by using oriental medicinal ingredients. The product was applied three times a day for two weeks by a total of 60 users who agreed to participate in a clinical trial assessing the usability and skin sensitivity to extracts that had already completed component safety testing. This study subjects reported which images were most reminiscent of Korea. They preferred products that bore Korean images because they felt trust and recognized that the quality of the cosmetics was excellent. The responses also showed that many consumers were willing to buy a product, even though it was luxurious, elegant, and expensive. The cognitive evaluation of Original Cosmetics was high and showed that the quality was likely to be good. The usability and CMF(Color, Material, Finishing) evaluation of Original Cosmetics showed good product the product is long-lasting and tightened and moisturized skin naturally. They are think about that this product it has moisturizing effects and good application for use, so it is light and soft to use. And had a whitening effect. It was intended to assist in the development of products that meet consumers' desires and expectations for safe, healthy, and beautiful skin by developing a skin whitening Original Cosmetics prototype that can inhibit the production of melanin and tyrosinase activity safely and effectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제14권4호
• /
• pp.39-45
• /
• 2010

Thick-walled cylinders, such as a cannon or nuclear reactor, are autofrettaged to induce advantageous residual stresses into pressure vessels and to increase operating pressure and the fatigue lifetimes. As the autofrettage level increases, the magnitude of compressive residual stress at the bore also increases. The purpose of the present paper is to predict the accurate residual stress of SCM440 high strength steel using the Kendall model which was adopted by ASME Code. Hydraulic pressure process was applied in the inner part and thick-walled cylinders were autofrettaged up to 30% overstrain levels. Electro polishing on the surface of autofrettage specimen was performed to get more accurate residual stress. Residual stresses were measured by X-ray diffraction method. The autofrettage surface which was plastically deformed analyzed using a scanning electron microscope(SEM). Although there were some differences in measured residual stress and numerical results, it has a tendency to agree comparatively with each other.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제23권3호
• /
• pp.51-57
• /
• 2019

Post curing effects are estimated by specimen tests. Propellant specimen accelerated aging tests are performed when post curing is estimated to be complete and the coefficients of Arrhenius aging equations are acquired. Simulated motors with cylindrical grain are designed and fabricated to confirm the application. Accelerated aging tests are conducted, and aged properties are measured and estimated for the inner bore, center and bond parts of the grain. The measured aging ratios of the modulus are compared with the ones predicted by the equations. As the results, the accelerated aging equations predict well the propellant aging trends; however, some differences are observed at the bond part. Therefore, the specimen extraction part must be carefully chosen to suit the test purpose when a rocket motor grain is used for the aging test.

• Korean Journal of Environmental Agriculture
• /
• 제38권2호
• /
• pp.89-95
• /
• 2019

BACKGROUND: Liquid pig manure (LPM) has been used as an alternative for conventional fertilizers on some gramineous crops. However, its chemical properties varied widely depending on the degree of the digestion. A pot experiment was conducted to determine the responses of persimmon trees to immature (not well-digested) LPM application. METHODS AND RESULTS: Ten application levels of immature LPM, consisted of a total of 3 to 30 L in 3-L increment, were applied during summer to 5-year-old 'Fuyu' trees grown in 50-L pots. Increasing the LPM application rate caused defoliation, wilting, and chlorosis in leaves. When applied with the rate of 3 L during summer, the tree produced small fruits with low soluble solids and bore few flower buds the following season, indicating insufficient nutritional status. In trees applied with the LPM rates of 6~12 L, both fruit characteristics and above-ground growth of the trees appeared normal but some roots were injured. However, application of higher LPM rates than 27 L resulted in small size, poor coloration, or flesh softening of the fruits the current season. Furthermore, the high LPM rates caused severe cold injury in shoots during winter and weak shoot growth the following season. It was noted that the application of higher LPM rate than 9 L damaged the root, even though above-ground parts of the tree appeared to grow normally. CONCLUSION: The results indicated that an excessive immature LPM application could cause various injuries on leaves, fruits, and the roots in both the current and the following season.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권12호
• /
• pp.279-286
• /
• 2018

The grouting method is to reinforce the ground by injecting the chemical solution for the strengthening of the ground. Cement grouting material has usually used portland cement for centuries ago, but the cement particle size is large and the injection effect is limited. This study analyzes the effect of ultrafine cement grouting in rock ground using 3S-1 grouting in rock ground and ordinary Portland cement (OPC). The results of tests were compared and analyzed from the Lugeon test, bore loading test (P.M.T.), and injection (P-Q) test. The use of ultrafine cement (3S-1) had a higher effect (K, 10-6cm/sec) than OPC. The reinforcement effect of 3S-1 was also confirmed. Ultrafine cement (3S-1) was 4~9 times more injectable than OPC. Therefore, it is more advantageous to use ultrafine cement (3S-1) than OPC.

• Journal of the Korean earth science society
• /
• 제42권2호
• /
• pp.195-200
• /
• 2021

Orientation corrections for the total of 268 accelerograph stations of the Korea Meteorological Administration (KMA) were estimated using ambient noise cross-correlation. As this method uses ambient noise data instead of teleseismic waveforms from earthquakes under certain conditions, reliable orientation corrections can be obtained using only two-month long continuous seismic data from dense seismic networks in the Korean peninsula.Three-component continuous data recorded at the 268 accelerograph stations from January to February 2020 were used to estimate orientation corrections. The results are comparable to the previous results obtained from teleseismic waveforms; the overall standard deviations of the orientation corrections are less than 5°. Therefore, orientation corrections for the accelerograph station network can be tracked periodically by the ambient-noise method and the result can be used in various studies using the horizontal-component of acceleration data.