• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.283-288
• /
• 2001

A throttle/brake control law for the intelligent cruise control(ICC) systems has been proposed in this paper. The ICC system consists of a vehicle detection sensor, the control algorithm and a throttle/brake actuators. For the control of a throttle/brake system, we introduced a solenoid-valve-controlled electronic vacuum booster and a step-motor controlled throttle actuator. Nonlinear computer model for the electronic vacuum booster has been developed and the simulations were per formed using a complete nonlinear vehicle model. The results indicate the proposed throttle/brake control law can provide the ICC system with an optimized performance.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.6 s.33
• /
• pp.7-14
• /
• 2005

The waterhammer occur when the pumps are started or stopped for the operation or tripped due to the power failure, and the hydraulic transients take place as a result of the sudden change in velocity. Several times, the field tests of the waterhammer were carried out for Pangyo booster pumping station. Pangyo pumping station was installed with the booster pumps of 6 sets and the in-line pumps of 2 sets. The in-line pumps are additionally needed to the surge suppression device so that the pumping station acquire the safety and reliability for the pressure surge.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.64-75
• /
• 1993

In this study, the function of a hydraulic brake system with a vacuum booster is systematically analyzed according to the mutual relations which follow : - the brake pedal force vs. booster cylinder input force - the booster output force vs. master cylinder input force - the hydraulic line pressure vs. braking deceleration. A computer program is developed based on the theory which is able to predict and analyze the pedal force characteristics at the beginning of the initial stage of brake system design. Analytical results show good agreement with the experimental vehicle test.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2015

Recently, Child safety has become one of the issue with Q10 dummy representing large child. The objective of this paper was to evaluate performance of three child restraints system (backless booster, high-back booster and without booster) by changing D-ring location in the rear seat. Sled tests were carried out with a Q 10 in 64km/h frontal impact. Before the dynamic sled tests, we assessed dummy positioning with difference in CRS types and height adjustment positions. Dynamic sled test results indicated that there is different performance of CRS types and belt routing. These test results will use as base line data for development CRS safety performance for Q 10.

• Plant Journal
• /
• v.6 no.3
• /
• pp.46-52
• /
• 2010

This study investigated the coating failure of the blades of booster fans for the 200 MW flue gas desulfurization plant. Although the arc sprayed SM8222 have been tried as blade coating materials aimed to apply as alternatives of Metcoloy(R)2 due to better corrosion-erosion resistance but it is failed. Bond strength tests and practical field experiences have demonstrated high velocity oxy-fuel(HVOF) coating method with Diamalloy 3004 as an alternative to Metcoloy(R) 2 arc spray.

• Clinical and Experimental Pediatrics
• /
• v.51 no.6
• /
• pp.622-628
• /
• 2008

Purpose : The purpose of this study was to evaluate the immunogenicity of the booster immunization with pneumococcal conjugate vaccine in Korean children. Methods : Thirty-nine children aged 12-23 months who visited Kangnam CHA Hospital between September 2006 and December 2006 were enrolled. The children were divided into primary and booster groups depending on their vaccination status for the 7-valent pneumococcal conjugate vaccine. The anti-pneumococcal antibody levels of each serotype included in the vaccine (4, 6B, 9V, 14, 18C, 19F, 23F) were determined by third-generation ELISA. Results : The geometric mean titer (GMT) of antibodies to each pneumococcal serotype in the booster group was higher than in the primary group (P<.05). The percentage of subjects with pneumococcal antibodies ${\geq}0.35{\mu}g/mL$ was 90.5-100% for all serotypes in both the primary and booster groups. The percentage of subjects with pneumococcal antibodies ${\geq}1.0g/mL$ in the booster group was 94.4-100%, which was higher than the primary group except for serotypes 6B and 14 (P<.05). The percentage of subjects with pneumococcal antibodies ${\geq}5.0{\mu}g/mL$ in the booster group was 50.0-94.4% which was higher than the primary group for all serotypes (P<0.05). Conclusion : The immunogenicity of a booster dose of the pneumococcal conjugate vaccine in Korean children was high and the immunogenicity of a primary series was also relatively high. To determine the feasibility of the introduction of the pneumococcal conjugate vaccine and the appropriate schedule for Korean children, further prospective investigation of the immunogenicity of the booster immunization is needed.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.69-75
• /
• 2010

Botulinum toxin type A(BTX-A) has been applied successfully to treat masseteric hypertrophy. However it can cause muscle weakness. This study was designed to measure the change in maximum bite force(MBF) after BTX-A injection into human masseter muscle and to evaluate the influence of a booster(repeated) injection. Thirty volunteers completed 18-week follow-up and MBF was measured. At 18 weeks after the first injection, a booster injection was given to 14 patients and they were followed up until 18 weeks from the booster injection. The mean MBF was approximately 20% lower at 2 weeks than before the injection, and it recovered gradually after 4 weeks to return to the preinjection level at 12 weeks. The MBF differed significantly between before the injection and at 2, 4, and 8 weeks after the injection(p<0.05). In booster injection group(n=14),the MBF decreased markedly at 6 weeks(p<0.05),and it recovered gradually in 12 weeks. The MBF was significantly reduced after booster injection of BTX-A into the human masseter muscle. The degree of discomfort experienced by the subjects had little effect on normal mastication.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.2 s.22
• /
• pp.280-286
• /
• 1987

For evaluating the boosting (anamnestic) effects of the most recent commercially produced plasma derived heat-inactivated hepatitis B vaccine (A. Co.), 117 adults with naturally acquired antibody to hepatitis B surface antigen (anti-HBs) were selected at random. In addition, out of case immunized at zero and 1 month, and boosted at 6 months (primary boosting) by conventional vaccine (B. Co), inactivated by pepsin digestion and formalin treatment, 11 cases who showed elevated titer after primary boosting were also submitted to the study. The results were as follows: 1) Out of the 117 subjects with naturally acquired anti-HBs, 6(5.1%) showed isolated anti-HBs and the titers were below 10 ratio units (RU). Negative seroconversion was seen in 4(3.4%) of the 117 cases at 12 months after the screening and, of these cases, 3 showed isolated anti-HBs and the titers were below 10 RU. 2) Eighty-three percent of the cases with naturally acquired isolated anti-HBs below 10 RU did not respond to a booster injection with 3 us dose of A. Co. vaccine at all, but 90% of the other subjects responded. 3) The anti-HBs titers of all the 11 cases who showed a rise of more than 10 RU (increased GMT, 28.04) at one month after primary booster injection by $20{\mu}g$ dose of B. Co. vaccine decreased at 19 months after the primary booster. And 3 subjects (27.3%) of the 11 reached negative seroconversion. All of the 11 cases, who had secondary booster injection with $3{\mu}g$ dose of A. Co. vaccine at 19 months after primary boosting, showed increased anti-HBs titer at least 20 RU or more (increased GMT, 57. 72) at one month after the boosting. According to the above results in the anti-HBs screening survey for the purpose of immunization with hepatitis B vaccine, subjects with isolated anti-HBs below 10 RU should be regarded as being in an unimmunized state. In cases who are in risk circumstances, immunized primarily with a $20{\mu}g$ dose of B. Co. vaccine, a secondary booster injection should be given within 2 years after initiation of primary immunization and a $3{\mu}g$ booster dose of A. Co. vaccine can be reliably used.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1131-1132
• /
• 2011

For the purpose to flow control of pump in booster pump station, nonlinear-load inverter equipment is being introduced. While inverter equipment has the advantage of power-ratio savings and volume control, due to the vibration of pump and motor, secondary breakdown may occur Purpose in this paper is reliable facility operation by providing optimal operationg standards through vibration analysis of apply to drive pump with inverter in long-term in booster pump station.