• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3289-3292
• /
• 2013

Introduction: The purpose of this study was to identify clinical profiles of patients with low risk of having bone metastases, for which bone scanning could be safely eliminated. Materials and Methods: This retrospective cross sectional study looked at prostate cancer patients seen in the Urology Departments in 2 tertiary centres over the 11 year period starting from January 2000 to May 2011. Patient demographic data, levels of PSA at diagnosis, Gleason score for the biopsy core, T-staging as well as the lymph node status were recorded and analysed. Results: 258 men were included. The mean age of those 90 men (34.9%) with bone metastasis was $69.2{\pm}7.3$ years. Logistic regression found that PSA level (P=0.000) at diagnosis and patient's nodal-stage (P=0.02) were the only two independent variables able to predict the probability of bone metastasis among the newly diagnosed prostate cancer patients. Among thowse with a low PSA level less than 20ng/ml, and less than 10ng/ml, bone metastasis were detected in 10.3% (12 out of 117) and 9.7% (7 out of 72), respectively. However, by combining PSA level of 10ng/ml or lower, and nodal negative as the two criteria to predict negative bone scan, a relatively high negative predictive value of 93.8% was obtained. The probability of bone metastasis in prostate cancer can be calculated with this formula: -1.069+0.007(PSA value, ng/ml)+1.021(Nodal status, 0 or 1)=x Probability of bone metastasis=$2.718^x/1+2.718^x$. Conclusion: Newly diagnosed prostate cancer patients with a PSA level of 10ng/ml or lower and negative nodes have a very low risk of bone metastasis (negative predictive value 93.8%) and therefore bone scans may not be necessary.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.535-541
• /
• 2004

The aims of the present study are firstly to investigate the amount of bone loss around non-submerged implants placed in the posterior region and secondly to investigate the relationship between inter-implant and implant-tooth distance and peri-implant bone loss. Thirty-one subjects with 60 implants were selected consecutively from the implant patient pool at the department of Chonbuk National University Hospital. To be included in the study subject, the implant should have been functioned more than 6 months after loading. Inter-implant and implant-tooth distance, distance between implant shoulder and the first bone contact with the implant(DIB) were measured from the scanning image of the radiograph of each implant. The result showed that; 1. inter-implant distance has a statistically significant relationship with DIB in Pearson correlation analysis. 2. the DIB at the implant facing surface of the implant was greater than that of tooth facing surface of the implant. Within limitation of this study, it is suggested to place an implant not too closely to adjacent implants, and the presence of a tooth adjacent to an implant may keep the level of tooth-facing surface of the implant. Further studies with a prospective design are needed to elucidate the relationship between bone changes and various dimensions around implants.

• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.480-491
• /
• 2018

Calcium phosphates (CaP) were prepared by a wet chemical method. Micro-crystalline dicalcium phosphate (DCPD) was precipitated at $37^{\circ}C$ and pH 5.0 using $Ca(OH)_2$ and $H_3PO_4$. The precipitated DCPD solution was kept at $37^{\circ}C$ for 96 h. Artificial bone cement was composed of DCPD, $Ca(H_2PO_4)_2{\cdot}H_2O$ (MCPM), and $CaSO_4{\cdot}1/2H_2O$, $H_2O$ and aqueous poly-phosphoric acid solution. The wet prepared CaP powder was used as a matrix for the bone cement recipe. With the addition of aqueous poly-phosphoric acid, the cement hardening reaction was started and the CaP bone cement blocks were fabricated for the mechanical strength measurement. For the tested blocks, the mechanical strength was measured using a universal testing machine, and the microstructure phase analysis was done by field emission scanning electron microscopy and X-ray diffraction. The cement hardening reaction occurred through the decomposition and recrystallization of MCPM and $CaSO_4{\cdot}1/2H_2O$ added on the surface of the wet prepared CaP, and this resulted in grain growth in the bone cement block.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.312-318
• /
• 2010

Multilayer Poly methyl methacrylate (PMMA)/ Poly vinyl alcohol (PVA) bone plates were fabricated using electrospinning and in vitro investigations were carried out for pre-clinical biocompatibility studies. The initial cellular cytotoxicity of the methacrylate (PMMA)/ Poly vinyl alcohol (PVA) bone plates was measured by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay using fibroblast-like L-929 cells. Cellular adhesion and differentiation studies were carried out using osteoblast-like MG-63 cells. As simulated body fluid (SBF) contains the same ionic concentration of body fluid and any bioactive material tends to deposit bone-like apatite on the samples surfaces into the SBF, in vitro bioactivity of the multilayer bone plates were investigated using SBF. We also studied the internal organization and tensile strength of the multilayer PMMA/PVA bone plates using micro-computed topography (${\mu}$-CT) and universal testing instrument (UTI, Korea) respectively. The cellular cytotoxicity study with MTT confirmed that the cellular viability was 78 to 90% which indicates good cyto-compatibility. Scanning electron microscopic findings revealed a good attachment and adhesion phenomenon of MG-63 cells onto the surfaces of the samples. Cellular differentiation studies also showed that osteogenic differentiation was switched on in a timely manner and affirmed along with that of the control group. Bone-like apatite formation on the surfaces was confirmed within 14 days of SBF incubation. Initial organizations of the multilayer PMMA/PVA bone plates were characterized as dense and uniform. The tensile strength of the post-pressing electronspun mat was higher than that of the pre-electronspun mat. These results suggest that a multilayer PMMA/PVA bone plate system is biocompatible, bioactive and a very good alternative bone plate system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.252-264
• /
• 1991

The purpose of this study was to compare the response of adjacent tissue and new bone formation after implantation by different methods of subperiosteal using using Proplast I and II in rabbit mandible. Microstructure of Proplast I and II was observed by scanning electron microscope. And the implantation procedure was carried out by dividing into tow groups, A and B. a group consisted of subperiosteal graft on the cortex, and the other B group was made up onlay graft following artificial decortication in the madibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and histopathologic examination. The samples extracted at the 6th postgrafting week were also used for biometric test. The result ere as follows : 1. By scanning electron microscopic observation, pore size was $50{\sim}180{\mu}m$ in the Proplast I and $100{\sim}220{\mu}m$ in Proplast II. 2. Macroscopically, infection of the graft site, deformation and displacement of the implanted materials were not observed in all experimental groups. 3. In the tissue response, infiltration of inflammatory cells and multinucleated giant cells were observed from the 2nd to the 8th week in Proplast I. Inflammatory cells decreased in number from the 2nd week in Proplast II suggesting that Proplast II is better than Proplast I. 4. Bone formation was not observed until the 8th week in the group A, but new bone formation from the surrounding graft bed and the periostium was appeared from the 4th week in the group B. 5. The maximum mean values of shear stress mere serially $65.5gf/mm^2$ in Proplast II of group B, $32.9gf/mm^2$ in Proplast I of group B, $17.0gf/mm^2$ in Proplast II of group A, and $15.7gf/mm^2$ in Proplast I. of group A.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.489-500
• /
• 2002

The purpose of this study was to evaluate newly fabricated tricalcium phosphate(TCP)/chitosan microgranuls as bone substitutes. TCP/chitosan microgranules were fabricated by dropping TCP-chitosan suspension into the NaOH/ethanol solution. The size of microgranules could be controllable via airflow rate. PDGF-BB was loaded into the fabricated granules via freeze-drying methods(300 ng/20 mg). To evaluate cell proliferation, cultured osteoblasts cell lines(MC3T3-El) was dropped on the BioOss(R), chitosan microgranules, TCP/chitosan microgranules and cultured for 1, 7 , 14, and 28 days. Scanning electron microscopic observation was done after 7 days of culture and light microscopic examination was done after 28 days of culture. PDGF-BB release from the microgranules was tested. Rabbit calvarial defects(8 mm in diameter) were formed and chitosan, TCP/chitosan, PDGF-TCP/chitosan microgranules, and BioGran(R) were grafted to test the ability of new bone formation. At SEM view, the size of prepared microgranules was 250-1000 um and TCP powders were observed at the surface of TCP/chitosan microgranules. TCP powders gave roughness to the granules and this might help the attachment of osteoblasts. The pores formed between microgranules might be able to allow new bone ingrowth and vascularization. There were no significant differences in cell number among BioOss(R) and two microgranules at 28 day. Light and scanning electron microscopic examination showed that seeded osteoblastic cells were well attached to TCP/chitosan microgranules and proliferated in a multi-layer. PDGF-BB released from TCP/chitosan microgranules was at therapeutic concentration for at least 1 week. In rabbit calvarial defect models, PDGF-TCP/chitosan microgranules grafted sites showed thicker bone trabeculae pattern and faster bone maturation than others. These results suggested that the TCP/chitosan microgranules showed the potential as bone substitutes.

• International Journal of Oral Biology
• /
• v.32 no.4
• /
• pp.143-151
• /
• 2007

This study was conducted to investigate the preventing effects of OPB (Rehmannia glutinosa Libosch and Eleutherococcus senticosus Max extracts) and combined OPB/Calcium therapy on bone loss in ovariectomized rats. Sixty Sprague Dawley rats of 12-week-old were divided into eight groups: OVX (ovariectomized), OPBL (OPB 50 mg/kg), OPBM (OPB100 mg/kg), OPBH (OPB 200 mg/kg), OPBL/CAL(OPBL+CAL), OPBM/CAL (OPBM+CAL), OPBH/CAL (OPBH+CAL) and CAL (Calcium citrate 88.33 mg/kg+1$\alpha$, 25-dihydroxy-vitamin $D_3$ 33.33 IU/kg). Bone mineral density (BMD), bone mineral content (BMC), bone strength indices and cortical thickness were analyzed by peripheral quantitative computerized tomography (pQCT). pQCT scanning showed that OVX induced a significant decrease in trabecular bone mineral density and bone mineral content in the proximal tibia $(-36.4\pm2.4%,\;-21.8\pm12.7%)$. These decreases were significantly prevented by the administration of OPBM and OPBM/CAL. Cortical BMD and BMC of tibia were slightly enhanced by OPB and OPB/CAL. However there was no significant difference between OVX and OPB, OPB/CAL treated group. Bone strength indices and cortical thickness were not significantly different. Our results suggest that OPB and combined OPB/Calcium therapy are effective in preventing the development of bone loss induced by ovariectomy in rats.

• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.388-401
• /
• 2017

Purpose: The physicochemical properties of a xenograft are very important because they strongly influence the bone regeneration capabilities of the graft material. Even though porcine xenografts have many advantages, only a few porcine xenografts are commercially available, and most of their physicochemical characteristics have yet to be reported. Thus, in this work we aimed to investigate the physicochemical characteristics of a porcine bone grafting material and compare them with those of 2 commercially available bovine xenografts to assess the potential of xenogenic porcine bone graft materials for dental applications. Methods: We used various characterization techniques, such as scanning electron microscopy, the Brunauer-Emmett-Teller adsorption method, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and others, to compare the physicochemical properties of xenografts of different origins. Results: The porcine bone grafting material had relatively high porosity (78.4%) and a large average specific surface area (SSA; $69.9m^2/g$), with high surface roughness (10-point average roughness, $4.47{\mu}m$) and sub-100-nm hydroxyapatite crystals on the surface. Moreover, this material presented a significant fraction of sub-100-nm pores, with negligible amounts of residual organic substances. Apart from some minor differences, the overall characteristics of the porcine bone grafting material were very similar to those of one of the bovine bone grafting material. However, many of these morphostructural properties were significantly different from the other bovine bone grafting material, which exhibited relatively smooth surface morphology with a porosity of 62.0% and an average SSA of $0.5m^2/g$. Conclusions: Considering that both bovine bone grafting materials have been successfully used in oral surgery applications in the last few decades, this work shows that the porcinederived grafting material possesses most of the key physiochemical characteristics required for its application as a highly efficient xenograft material for bone replacement.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.149-156
• /
• 2009

Purpose: Deproteinized bovine bone substitutes are commonly used in dental regenerative surgery for treatment of alveolar defects. In this study, three different bovine bone minerals - OCS-B (NIBEC, Seoul, Korea), Bio-Oss (Geistlich - Pharma, Switzerland), Osteograft/N - 300 (OGN, Dentsply Friadent Ceramed. TN, USA) - were investigated to analyze the basic characteristics of commercially available bone substitutes. Methods: Their physicochemical properties were evaluated by scanning electron microscopy, energy dispersive X-ray spectrometer (EDS), surface area analysis, and Kjeldahl protein analysis. Cell proliferation and alkaline phosphatase (ALP) activity of human osteosarcoma cells on different bovine bone minerals were evaluated. Results: Three kinds of bone substitutes displayed different surface properties. Ca/P ratio of OCS - B shown to be lower than other two bovine bone minerals in EDS analysis. Bio-Oss had wider surface area and lower amount of residual protein than OCS - B and OGN. In addition Bio - Oss was proved to have lower cell proliferation and ALP activity due to lots of residual micro particles, compared with OCS - B and OGN. Conclusions: Based on the results of this study, three bovine bone minerals that produced by similar methods appear to have different property and characteristics. It is suggested that detailed studies and quality management is needed in operations for dental use and its biological effects on new bone formation.

• Archives of Pharmacal Research
• /
• v.26 no.1
• /
• pp.76-82
• /
• 2003

Drug releasing porous poly($\varepsilon$-caprolactone) (PCL)-chitosan matrices were fabricated for bone regenerative therapy. Porous matrices made of biodegradable polymers have been playing a crucial role as bone substitutes and as tissue-engineered scaffolds in bone regenerative therapy. The matrices provided mechanical support for the developing tissue and enhanced tissue formation by releasing active agent in controlled manner. Chitosan was employed to enhance hydrophilicity and biocompatibility of the PCL matrices. PDGF-BB was incorporated into PCL-chitosan matrices to induce enhanced bone regeneration efficacy. PCL-chitosan matrices retained a porous structure with a 100-200 $\mu$m pore diameter that was suitable for cellular migration and osteoid ingrowth. $NaHCO_3$ as a porogen was incorporated 5% ratio to polymer weight to form highly porous scaffolds. PDGF-BB was released from PCL-chitosan matrices maintaining therapeutic concentration for 4 week. High osteoblasts attachment level and proliferation was observed from PCL-chitosan matrices. Scanning electron microscopic examination indicated that cultured osteoblasts showed round form and spread pseudopods after 1 day and showed broad cytoplasmic extension after 14 days. PCL-chitosan matrices promoted bone regeneration and PDGF-BB loaded matrices obtained enhanced bone formation in rat calvarial defect. These results suggested that the PDGF-BB releasing PCL-chitosan porous matrices may be potentially used as tissue engineering scaffolds or bone substitutes with high bone regenerative efficacy.