• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1239-1244
• /
• 2000

In order to investigate the effect of incorporation of thermally processed cereal (maize) grain and differently degradable protein sources in the calf starter, twenty four newly born crossbred $(Bos\;taurus{\times}Bos\;indicus)$ calves were assigned at random to six diets in a $3{\times}2$ factorial design involving three protein sources viz. groundnut meal (GN), cottonseed meal (CS) and meat and bone meal (MB), each along with two differently processed grain, namely ground raw (R) and pressure cooked (P) maize. The corresponding calf starters with green oats (Avena sativa) were given free-choice from 14 d onwards till the end of the 90 d experimental feeding. A restricted milk diet was fed till the age of weaning at 60 d. Total DM intake was not affected by cereal or protein sources. However, daily intake of DM (59.23 vs 66.45 g) and CP (12.38 vs 14.10 g) per kg $W^{0.75}$ was reduced (p<0.05) due to cereal processing. Better (p<0.05) feed and protein efficiencies after weaning and during entire period in calves fed processed maize resulted in a trend of higher $(p{\leq}092)$ growth rate especially when GN was the source of protein. In comparison among protein sources, calves fed MB diets tended to grow faster $(p{\leq}098)$ concurrent with a higher CP intake before weaning. It is thus evident that thermal processing of maize in the calf starter seems to improve calf performance. Moreover, results indicated that feeding of protein and starch sources of matching ruminal degradability may prove beneficial for early growth of crossbred calves.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.195-201
• /
• 2020

This study studied scoliosis, one of the most common modern diseases caused by lifestyle patterns of office workers sitting in front of computers all day and modern people who use smart phones frequently. Scoliosis is a typical complication that takes more than 80% of the nation's total population at least once. X-ray are used to test for these complications. X-ray, a non-destructive testing method that allows scoliosis to be easily performed and filmed in various areas such as the chest, abdomen and bone without contrast agents or other instruments. We uses NI DAQ to miniaturize digital X-ray imaging devices and image intensifier in self-shielding housing with Vision Assistant for drawing lines to the top and the bottom of the spine to acquire angles, i.e. curvature in real-time. In this way, the research was conducted to see scoliosis patients and their condition easily and to help rapid treatment for solving the problem of posture correction in modern people.

• Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.136-140
• /
• 2002

Every year fish skin, bone and intestines are discarded as processing waste material. The use of fish processing waste material is more economical and environmental-friendly. The leather-like material was produced using shark intestine. Physical charactistics such as tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were measured, and compared with those of a commercial leather product. The values of tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were $3.3kg/mm^2$, $53\%$, 13.0kg/mm and $18kg/cm^2$, respectively. Elongation $(l09\%)$ of the leather-like material coated with lacquer was higher than that of a commercial leather material, and the other factors were similar. The tensile strength and tongue tearing strength of the leather-like material was higher than those of shoes leather, but bursting strength was lower. These results suggested a potential value to use the leather-like material from shark intestines as a substitute for commercial leathers.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.611-614
• /
• 2015

This study was performed to apply a protein film containing a natural antimicrobial compound to meat packaging and determine quality change of meat during storage. Proteins obtained from the by-products of food processing have been utilized as biodegradable film sources. Porcine meat and bone meal (MBM) is obtained during meat processing, and proteins from the MBM can be extracted and used as a film base material. Previously, an antimicrobial MBM film containing coriander oil (CO) was prepared and its physical properties and antimicrobial activity were characterized. In this study, the antimicrobial MBM-CO film was applied to beef patties packaging, and the microbial population and the degree of lipid oxidation were determined during storage at 4℃ for 15 d. The population of inoculated E. coli O157:H7 in the samples wrapped with the MBM-CO film was 6.78 log colony forming unit (CFU)/g after 15 d of storage, whereas the control had 8.05 Log CFU/g, thus reducing the microbial population by 1.29 Log CFU/g. In addition, retardation of lipid oxidation in the patties was observed during storage for the samples packaged by the MBM-CO film, compared with the control samples. These results suggest that the MBM-CO film can be useful for enhancing the quality of beef patties during storage.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2016

In the field of Radiology, the Computer Aided Diagnosis is the technology which gives valuable information for surgical purpose. For its importance, several computer vison methods are processed to obtain useful information of images acquired from the imaging devices such as X-ray, Magnetic Resonance Imaging (MRI) and Computed Tomography (CT). These methods, called pattern recognition, extract features from images and feed them to some machine learning algorithm to find out meaningful patterns. Then the learned machine is then used for exploring patterns from unseen images. The radiologist can therefore easily find the information used for surgical planning or diagnosis of a patient through the Computer Aided Diagnosis. In this paper, we present a review on three widely-used methods applied to Computer Aided Diagnosis. The first one is the image processing methods which enhance meaningful information such as edge and remove the noise. Based on the improved image quality, we explain the second method called segmentation which separates the image into a set of regions. The separated regions such as bone, tissue, organs are then delivered to machine learning algorithms to extract representative information. We expect that this paper gives readers basic knowledges of the Computer Aided Diagnosis and intuition about computer vision methods applied in this area.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.7
• /
• pp.1053-1060
• /
• 2019

Thermal drying is a common process used in the food industry for the modification of agricultural products. However, while various studies have investigated the alteration in physiochemical properties and chemical composition after drying, research focusing on the relationship between different dehydration conditions and bioactivity is scarce. In the current study, we prepared dried ginger under nine different conditions by varying the processing time and temperature and compared their immunomodulatory effects. Interestingly, depending on the drying condition, there were significant differences in the immunestimulating activity of the dried ginger samples. Gingers processed at $50^{\circ}C$ 1h displayed the strongest activation of macrophages measured by $TNF-{\alpha}$ and IL-6 levels, whereas, freezedried or $70^{\circ}C$- and $90^{\circ}C$-dried ginger showed little effect. Similar results were recapitulated in primary bone marrow-derived macrophages, further confirming that different dehydration conditions can cause significant differences in the immune-stimulating activity of ginger. Induction of ERK, p38, and JNK signaling was found to be the major underlying molecular mechanism responsible for the immunomodulatory effect of ginger. These results highlight the potential to improve the bioactivity of functional foods by selectively controlling processing conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.318-331
• /
• 2021

This study was conducted on the assumption that bone age would be more effective when it comes to physique and physical fitness assessment for adolescents, and the purpose of this study was to identify the differences in physique and physical fitness for students in their adolescence through bone age and chronological age in order to contribute to the well-balanced physique and physical fitness development in adolescents and the health improvement in students. Total 874 adolescents(483 males, 391 females) aged 11~16 were selected as subjects out of the total population of 1100 adolescents aged 6~16 based on the PAPS(Physical Activity Promotion System) and age standards of the TW3 method; and skeletal maturation, which symbolize the indicators of biological maturation, were evaluated by using the TW3(Tanner-Whitehouse 3) method after hand-wrist radiographs, and birth date was used for chronological age. A stadiometer and InBody 270 (Biospace, Korea) were used to measure 2 components in physique. A total of 7 components in physical fitness, which included muscular strength, muscular endurance, flexibility, power, cardiovascular endurance, balance, agility, were measured as well. A independent samples t-test was conducted for data processing using SPSS 25.0, and the significance level was set at p< .05. The study results are as follows. First, bone age and chronological age used for physique comparison in males aged 11 and 12, height and weight showed significant difference; in males aged 13, weight showed signicant difference. Weight and height in females aged 11, and height in females aged 12 showed significant difference. Second, bone age and chronological age used for physical fitness comparison in males aged 11, muscular strength, power, flexibility, cardiovascular endurance showed significant difference; in males aged 12, muscular strength. power, cardiovascular endurance; in males aged 13, flexibility showed significant difference. Muscular strength, power, flexibility, muscular endurance, cardiovascular endurance in females aged 11, and flexibility in females aged 14 showed significant difference. As a result, this study concluded that in a period of rapid skeletal growth, evaluating physique and physical fitness based on bone age is more accurate than evaluating based on chronological age.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 1997.05a
• /
• pp.20-27
• /
• 1997

Chinin is the second most plentiful natural polymer. Currently, chitin and chitosan are manufactured commercially in large scale from crab and shrimp shell as fish processing waste. They is being used in many commercial application because of their various functional properties. Chitosan, in particular, is being evaluated as biomedical materials in a number of food and pharmaceutical industries. Despite their potential abilities, the perfect safety had been demonstrated until now. However, the long-term feeding with chitin was not any negative effect the body weights and serum enzymatic activities in mice. And, in rats supplied with $5\%$ of chitosan diet for 450 days, there was no changes of Ca concentration in blood, bone and other organs except for in muscle. Consequently, there was no direct toxicity of chitin and chitosan against some animals such as rat and mouse by recently reports.

• The KIPS Transactions:PartC
• /
• v.8C no.4
• /
• pp.443-450
• /
• 2001

본 논문에서는 무선 ATM 망에서 VBR(Variable Bit Rate) 트래픽의 QoS(Quality of Service)를 보장하고 무선 채널의 효율성을 극대화 할 수 있는 새로운 동적 슬롯 할당 알고리즘인 NDSA(Neural Dynamic Slot Assignment)를 제안한다. 제안된 알고리즘에서는 ATM 셀 헤더 부분의 GFC(Generic Flow Control) 필드 상에 단말기의 버퍼 상태와 셀 발생률 변화를 부호화 하여 piggybacking 하는 in-band 방식을 채택하였으며 다음 프레임에 할당할 슬롯의 갯수를 기존 방식과는 달리 신경회로망을 이용하여 유동적으로 조절하여 할당함으로써 단말기의 셀 손실이나 지연에 대한 QoS를 보장하고 채널 이용 효율을 높일 수 있었다. 제안된 알고리즘은 BONeS tool을 이용한 시뮬레이션을 통하여 기존의 방식과 비교 분석한 결과 그 정당성을 확인하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2002

Reverse engineering is an emerging technology to obtain CAD models from existing physical parts in the case that CAD models are not available or paras are changed an(1 modified so that new CAD models for final parts are necessary. Reverse engineering helps designers to quickly generate computer interpretable data from existing Physical objects So it is applying for field of Rapid Prototyping NC Processing CAE, Inspection and so on. The objective of this study is to develop the software that deals with unorganized point data and quickly obtains CAD model. In this paper, several models such as human\`s bone, car, are experimented by the proposed methods.