• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.90-93
• /
• 2015

The fibula free flap has now become the most reliable and frequently used option for mandible reconstruction. Recently, three dimensional images and printing technologies are applied to mandibular reconstruction. We introduce our recent experience of mandibular reconstruction using three dimensionally planned fibula free flap in a patient with gunshot injury. The defect was virtually reconstructed with three-dimensional image. Because bone fragments are dislocated from original position, relocation was necessary. Fragments are virtually relocated to original position using mirror image of unaffected right side of the mandible. A medical rapid prototyping (MRP) model and cutting guide was made with 3D printer. Titanium reconstruction plate was adapted to the MRP model manually. 7 cm-sized fibula bone flap was designed on left lower leg. After dissection, proximal and distal margin of fibula flap was osteotomized by using three dimensional cutting guide. Segmentation was also done as planned. The fibula bone flap was attached to the inner side of the prebent reconstruction plate and fixed with screws. Postoperative evaluation was done by comparison between preoperative planning and surgical outcome. Although dislocated condyle is still not in ideal position, we can see that reconstruction was done as planned.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.2
• /
• pp.80-83
• /
• 2016

A 37-year-old male was assaulted and complained of severe periorbital swelling. Physical examination revealed that there were limitation of eyeball movement on upper gaze, diplopia, and hypoesthesia on the infraorbital nerve innervating region. Three-dimensional (3D) computed tomography (CT) of facial bone exhibited the fracture of orbital floor accompanying the significant amount of orbital contents' herniation extending to the far posterior part. To recover the orbital volume and restore orbital floor without threatening the optic nerve, preoperative simplified simulation was applied. The posterior margin of the fractured orbit was delineated with simulation technique using cross-linkage between the coronal and sagittal sections based on the referential axial view of the CT scans. Dissection, reduction of orbital contents, and insertion of the absorbable mesh plate molded after the prefabricated template by the simulation technique was performed. Extensive orbital floor defect was successfully reconstructed and there were no serious complications. The purpose of this report is to emphasize the necessity of preoperative simulation in case of restoring the extensive orbital floor defect.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.115-120
• /
• 2009

Purpose: To evaluate the outcomes of three different surgical approaches in treating a distal radius fracture with dorsal communition. Materials and Methods: From April, 2006 to May, 2009, 49 patients over age of 60years old with unstable dorsal communition distal radius fracture were analyzed. We compared maintainability of reduction by radiological follow-up observations and clinical outcomes using Mayo wrist scores. One-Way ANOVA test was performed to examine the statistical correlation between the methods. Results: All three approaches provided satisfactory post-op reduction results. However, follow-up observations showed significant loss of reduction in the external fixation only group compared to the added bone graft group and the volar anatomical locking plate group (P<0.05). Mayo wrist score was indifferent between the three groups. Conclusion: Treatment of a distal radius fracture with severe dorsal communition using an external fixation only appears to be insufficient in maintaining reduction of a cancellous bone defect.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.427-432
• /
• 2021

Delayed treatment of volar dislocation of the distal radioulnar joint can result in wrist pain, limited rotation of the forearm, and degenerative arthritis that could be managed only by salvage procedures. A 24-year-old male patient presented with wrist pain and a loss of forearm rotation after surgery for a radial shaft fracture. The shaft of the radius was fixed with a plate and screws with a volar angulation of 7°. The ulnar head was dislocated volar to the distal radius, and the bone defect in the ulnar head was impacted into the volar rim of the sigmoid notch of the radius, preventing the head from being reduced in the joint. Corrective osteotomy of the malunited radial shaft and sliding osteotomy of the proximal ulnar head were performed to fill the distal bone defect. Pain and range of the forearm rotation were improved at postoperative 19 months.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.5
• /
• pp.429-438
• /
• 2007

Transport distraction osteogenesis has been introduced recently to correct skeletal malformations and discrepancies in the maxillofacial area. To reconstruct 3-dimensitonal mandibular shape, this transport distraction can be considered with the use of reconstruction plate. A 23-years-old male having unilateral mandibular body and angle defects, who had been operated of partial mandibular resection due to unicystic ameloblastoma, was treated by transport distraction procedures with ThreadLock transport $distractor^{(R)}$ (KLS Martin Co., Germany) through the rail of reconstruction plate (Osteomed Co., USA). After being distracted 35 mm defect from mandibular angle to body, and consolidated for 16 weeks, allogenic bone graft on docking site was performed with removal of transgingival pin. For more than 13 weeks follow up period after consolidation period, gradual increase of radiopacity in the radiographic examination was shown, and the curved mandibular continuity according to the reconstruction plate was made firmly. These transport distraction osteogenesis in the mandible was able to be considered as the good and minimally invasive technique for the reconstruction of mandibular discontinuity. Young patient was also very satisfactory for these results.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.221-225
• /
• 2007

Purpose: To evaluate the clinical results of operative treatment of the intra-articular calcaneal fracture with injectable calcium sulfate ($MIIG^{TM}$). Materials and Methods: Between March 2004 and October 2006, a total 19 intra-articular calcaneal fracture (16 patients) with a large bony defect that underwent operative treatment with plate fixation and injectable calcium sulfate ($MIIG^{TM}$) with minimum follow-up of one year following. The mean age at time of surgery was 44.7 years (23 to 54). All of the cases were type 2 and 3 on the basis of Sanders classification. The lateral L shaped approach was used in all cases. Full weight bearing on the affected extremity was regained at an average 10 weeks postoperatively. Results: The mean Bohler angle was improved from $2^{\circ}$ ($-18.5{\sim}12.5^{\circ}$) preoperatively to $23.8^{\circ}$ ($12{\sim}37.5^{\circ}$) and the angle at last follow-up was $22.5^{\circ}$ ($11.5{\sim}37.5^{\circ}$), showing about 0.3 degree decline compared to postoperative Bohler angle. Only two case of whitish leakage of graft material but other complication were none. Conclusion: $MIIG^{TM}$ augumentation of displaced intra-articular calcaneal fracture with large bone defect seems to bo useful method for initial stabilized and plate fixation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.35.1-35.9
• /
• 2022

Although the success rates of microsurgery and micro-resurgery are very high, the influence of a recurrent perforation combined with radicular cyst remains unclear. A 21-year-old white female patient had a history of root perforation in a previously treated right maxillary lateral incisor. Analysis using cone-beam computed tomography (CBCT) revealed an extensive and well-defined periapical radiolucency, involving the buccal and palatal bone plate. The perforation was sealed with bioceramic material (Biodentine) in the pre-surgical phase. In the surgical phase, guided tissue regeneration (GTR) was performed by combining xenograft (lyophilized bovine bone) and autologous platelet-rich fibrin applied to the bone defect. The root-end preparation was done using an ultrasonic tip. The retrograde filling was performed using a bioceramic material (Biodentine). Histopathological analysis confirmed a radicular cyst. The patient returned to her referring practitioner to continue the restorative procedures. CBCT analysis after 1-year recall revealed another perforation in the same place as the first intervention, ultimately treated by micro-resurgery using the same protocol with GTR, and a bioceramic material (MTA Angelus). The 2-year recall showed healing and bone neoformation. In conclusion, endodontic micro-resurgery with GTR showed long-term favorable results when a radicular cyst and a recurrent perforation compromised the success.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.6
• /
• pp.790-794
• /
• 2001

Spinal osteochondroms are very rare, and are thought to arise through a process of progressive endochondral ossification of aberrant cartilage of a growth plate, as a consequence of congenital defect or trauma. A case of diffuse type osteochondroma involving the posterior elements of L1-L5 that progressed after laminectomy in a 33-year-old man is reported. Usually, the spinal osteochondroma shows clear demarcation between tumor margin and normal spine elements, and can be exised completely. However, there was no clear demarcation between tumor and normal spine element in our case and therefore it was not possible to removal completely.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.113-124
• /
• 2018

The purpose of this case report was to introduce the concept of orthodontic and orthopedic treatment for a growing patient with Tessier number 0 cleft. A 5-year-old boy patient with Tessier number 0 cleft presented congenitally missing maxillary central incisors (MXCI), a bony defect at the premaxilla, a constricted maxillary arch, an anterior openbite, and maxillary hypoplasia. His treatment was divided into three stages: management of the bony defect at the premaxilla and the congenitally missing MXCIs using a fan-type expansion plate, iliac bone grafting, and eruption guidance of the maxillary lateral incisors into the graft area for substitution of MXCIs; management of the maxillary hypoplasia using sequential facemask therapy with conventional and skeletal anchorage; and management of the remaining occlusal problems using fixed orthodontic treatment. The total treatment duration was 15 years and 10 months. Class I canine and Class II molar relationships and normal overbite and overjet were achieved at the end of treatment. Although the long-term use of facemask therapy resulted in significant protraction of the retrusive maxilla, the patient exhibited Class III profile because of continued mandibular growth. However, the treatment result was well maintained after 2 years of retention. The findings from this case suggest that interdisciplinary and customized approaches are mandatory for successful management of maxillary hypoplasia, bony defect, and dental problems in Tessier number 0 cleft. Moreover, considering the potential of orthognathic surgery or distraction osteogenesis, meticulous monitoring of mandibular growth until growth completion is important.