• 대한치과보철학회지
• /
• 제47권3호
• /
• pp.312-319
• /
• 2009

연구목적: 지르코니아-도재 수복물에 있어 상부도재와 코어 사이의 결합 실패가 종종 보고되어 왔으며 특히 착색지르코니아 코어는 기존의 백색 지르코니아보다 상부 도재와의 결합력이 약하다고 보고된 바 있다. 이 연구의 목적은 착색 지르코니아 코어 위의 상부도재를 적층식과 열가압식으로 제작하여 그 전단결합강도를 알아보고, 이를 전통적인 금속-도재간 결합강도와 비교하여 그 임상적 안정성을 평가하는 것이다. 연구 재료 및 방법: 금속도재군 (MC)을 대조군으로 하였다. 전통적인 금속도재군 (MC)과 지르코니아 코어를 사용한 두가지 군 (ZB, ZP)에 대하여 각 시스템별로 10개씩, 총 30개의 시편을 제작했다. CAD/CAM을 이용해 직경 12 mm, 높이 2.8 mm의 원판형 지르코니아 코어 (Katana zirconia)를 제작하고, 그 상부에 직경 2.8 mm, 높이 3 mm의 도재를 축성했다. ZB군은 CZR을 이용하여 적층법으로 상부도재를 제작했으며 ZP군은 NobelRondo Press ingot를 열가압하여 제작했다. Shear bond test machine (R&B Inc. Daejeon, Korea)을 이용하여 분당 0.50 mm의 속도로 파절이 일어날 때까지 전단력을 가하여 최대적용력 (N)을 측정하여 전단결합강도를 계산하고, 일원배치 분산분석을 사용하여 유의수준 5%에서 검정하였다. 파절양상을 알아보기 위하여 전자주사현미경을 통해 파절단면을 관찰했다. 결과: 평균 전단강도 (SD)는 MC 대조군 29.14 (2.26); ZB 29.48 (2.30); ZP 29.51 (2.32) 이었다. 실험군과 대조군 사이에 유의한 차이는 없었다. 모든 실험군에서 접착성 실패와 응집성 실패가 혼재된 양상을 보였으며, 응집성 실패가 우세했다. 결론: 1. 착색지르코니아 코어와 상부도재들 간의 전단결합강도는 금속 도재간 전단결합강도와 유의한 차이가 없었다. 2. 착색지르코니아 코어의 상부도재를 제작하는 방식에 있어 적층법과 열가압법 간의 전단결합강도에 유의한 차이는 없었다 (P > .05). 3. 파절양상은 응집성 파절이 우세한 가운데 접착성 파절과 응집성 파절이 혼재되어 나타났다.

• 대한소아치과학회지
• /
• 제29권3호
• /
• pp.389-396
• /
• 2002

이 연구의 목적은 전형적인 우식제거(bur)와 기계화학적으로 제거된 상아질($Carisolv^{TM}$)의 microtensile bonding strength를 비교하는 것이다. 다음과 같은 결합 system이 사용되었다; AB: All Bond 2(3M, USA), PB: Prime & Bond 2.1(Dentsply, DE), AQ: AQ Bond(sun medical, Japan). 교합면 우식증을 가지고 있는 42개의 사람 대구치를 6개 그룹으로 나누었다. 각각의 그룹은 다음과 같이 나누었다; $Carisolv^{TM}$를 적용한 그룹 A, B, C와 bur를 사용한 그룹 D, E, F, A와 D 그룹에서는 AB가 상아질 결합제로 사용하였고, 그룹 B, E는 PB를 그룹 C, F는 AQ를 사용하였다. 그 후 와동은 복합레진(Z-100)으로 충전하였다. 각각의 시편을 0.7 mm 두께로 자르고 0.7 mm의 넓이로 다시 잘랐다. Microtensile bonding strength test는 $0.5\;mm/min^{-1}$의 crosshead에서 시행하여 파절면을 scanning electron microscope(JSM-6400, Jeol, Japan)로 관찰하여 다음과 같은 결과를 얻었다. 1. $Carisolv^{TM}$로 우식을 제거했을 때 Microtensile bonding strength는 bur를 사용한 것에 비해서 75.8-80%로 감소하였다(p<0.05). 2. $Carisolv^{TM}$로 우식을 제거했을 때 Microtensile bonding strength가 감소된 정도는 상아질 결합제의 종류에 따라 각 군별로 차이가 없었다(p<0.05). 3. $Carisolv^{TM}$로 우식을 제거했을 때 All bonds는 32.6 MPa, Prime & bond는 30.1 Mpa, AQ bond는 21.2 Mpa이었다. 4. Bur와 $Carisolv^{TM}$로 우식제거시 AQ bond는 All bond와 Prime & bond 2.1보다 유의하게 낮은 결합강도를 가졌다(p<0.01).

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.221-228
• /
• 2011

PURPOSE. Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white or colored) on shear bond strength (SBS) of zirconia core and its veneering porcelain. MATERIALS AND METHODS. Eighty zirconia disks (40 white and 40 colored; 10 mm in diameter and 4 mm thick) were treated with three different mechanical surface conditioning methods (Sandblasting with $110{\mu}m$ $Al_2O_3$ particle, grinding, sandblasting and liner application). One group had received no treatment. These disks were veneered with 3 mm thick and 5 mm diameter Cercon Ceram Kiss porcelain and SBS test was conducted (cross-head speed = 1 mm/min). Two and one way ANOVA, Tukey's HSD Past hoc, and T- test were selected to analyzed the data (${\alpha}=0.05$). RESULTS. In this study, the factor of different types of zirconia ceramics (P=.462) had no significant effect on SBS, but the factors of different surface modification techniques (P=.005) and interaction effect (P=.018) had a significant effect on SBS. Within colored zirconia group, there were no significant differences in mean SBS among the four surface treatment subgroups (P=0.183). Within white zirconia group, "Ground group" exhibited a significantly lower SBS value than "as milled" or control (P=0.001) and liner (P=.05) groups. CONCLUSION. Type of zirconia did not have any effect on bond strength between zirconia core and veneer ceramic. Surface treatment had different effects on the SBS of the different zirconia types and grinding dramatically decreased the SBS of white zirconia- porcelain.

• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.23-31
• /
• 2001

The purpose of this study was to search the optimal silane concentrations for filler- silanization of seven experimental composites. Silica filer was a 25micron crushed type. 0.0%, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%, and 3.0% silane($\gamma$-methacrylooxypropyltrimethoxysilane)were added into silica-filler with weight percentage (wt%). Mixtures(silica filler/silane)were reacted at 6$0^{\circ}C$ for 72hours, and crushed into fine particles those were used as fillers for 7 experimental composites. Monomer was a 3 : 1 mixture of Bis-GMA and TEGDMA containing 0.2% tertiary amine and 0.4% camphoroquinone for light curability. A ratio for mixing the monomer and filler was 75% and 25% respectively. Seven experimental composites was classified with the concentration of silane treated, and the specimen number for each test was 10. Specimens with 6mm diameter and 3mm height dimension for measuring the diametral tensile strength were destroyed with 1mm/min cross-head speed on Instron universal testing machine (No. 4467, USA). Shear bond strength was measured on the specimens bonded to bovine enamel etched with 37% phosphoric acid solution for 1 minute Fractured surfaces were observed by SEM (Hitachi S-3200, Japan) among that of the highest values measured from each groups. Following results were obtained: 1. Experimental composites containing silanized filter showed the significantly higher diametral tensile strength and shear bond strength than the composites containing un-silanized fillers(Group1) (p<0.05). 2. In silanized filler composite resins(Group 2~7), Diametral tensile strength of Group 3 showed the significantly higher than that of Group 2 and Group 6(p<0.05). 3. Shear bond strength was higher in Group 3 than that of Group 7 (p＜0.05)in silanized fillers composite resins. 4. Fracture surface was formed in resin matrixes on the specimens from composites containing the fillers treated with 0.5% 1.0%, and 1.5% silane. These results mean that the optimal silane concentrations are exist for each fillet with its size and surface area, and that 1.0% is a optimal value for concentration to coat the 25$\mu\textrm{m}$ filler with silane.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.159-168
• /
• 1994

The purpose of this study was to evaluate the shear bond strength of the porcelain laminate specimens according to the surface roughness of the cut enamel of human anterior teeth. Flat enamel surfaces were prepared in 30 extracted human anterior teeth with diamond disc which were divided into two groups. Group 1 Coarse enamel surface group prepared with LVS-3 bur. Group 2 Fine enamel surface group prepared with superfine diamond bur. 30 teeth specimens of two group were stored in normal saline during 24 hours. 30 disk - type porcelain laminate specimens with diameter 4mm and thickness 1mm were made and sand - blasted on internal surface which were to cemented on enamel surface. Porcelain laminate specimens were cemented on enamel surface with Choice Veneer System (Bisco Dental, U.S.A) according to manufacture's instructions. All teeth specimens of two groups were manipulated with same method and stored In normal saline before testing. An Universal Testing machine (Model No.UTM-4206,Instron, U.S.A) was used to apply shear loads in the vertical directed, and the force required for separation was recorded with a cross head speed of 3mm/min and 500kg in full scale. The results were as follow ; 1. The mean shear bond strength of coarse surface group was 36.30kg and that of fine surface group was 44.39 kg, but there was no significant difference in breaking strength of two groups(p>0.05).

• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.284-295
• /
• 1999

아말감의 단점인 건전 치질 삭제와 미세 누출을 줄이기 위한 접착 아말감(bonded amalgam)에 사용되는 치과용 접착제의 접착 강도를 측정하고 파절면을 관찰하여 콤포지트 레진과 비교 평가하였다. 발거한 우전치의 순면을 직경 8mm의 원형으로 천공하여 얻은 부분을 순면이 바깥쪽으로 향하도록 아크릴릭 레진 블록에 매몰하여 상아질과 법랑질군을 각각 55개씩 준비하였다. 1군:Superbond C&B, 2군:Panavia 21, 3군:All-Bond 2, 4군:Fuji I Glass Ionomer Luting Cement, 5군:Scotchbond Multi-Purpose(Restorative Z-100)의 5개 군으로 나누어 지름 6.3mm, 깊이 1.5mm의 구멍이 뚫린 충전용 틀(mold)을 위치시키고 표면을 접착제로 처리한 후 아말감 충전을 하였다. 5군은 레진 충전 후 40초간 광중합하였다. 각 시편은 아말감 충전 24시간 후 접착 강도 측정용 기구에 장착하고 만능 시험기에서 0.2mm/min의 cross-head 속도로 하중을 가하여 시편이 탈락할 때까지의 하중값(kg)을 측정하고, 파절면을 검사하여 다음과 같은 결론을 얻었다. 1. 상아질군에서 1, 2, 4군은 5군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였다(P<0.05). 2. 법랑질군에서 4군은 5군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였다(P<0.05). 3. 2군에서는 상아질군에서 법랑질군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였으나(P<0.05), 다른 접착제에서는 상아질군과 법랑질군에서의 접착 강도가 유의성 있는 차이를 보이지 않았다(P>0.05). 4. Cohesive failure는 1E군과 5D군에서 관찰되었고, mixed failure는 1, 5군에서 관찰되었으며, 2, 3, 4군에서는 adhesive failure만 관찰되었다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.148-161
• /
• 2008

본 연구는 상아질 혼성층의 교원섬유를 가수분해하는 효소인 MMPs (Matrix metalloproteinses)의 억제제로 알려진 chlorhexidine (CHX)을 적용 후 결합강도를 측정하였으며, 이를 각각 열순환 처리 후 결합강도를 측정하였다. 또한 주사전자현미경으로 접착계면에서의 파괴 양상을 비교 분석하였다. 우식이 없는 발거한 32개의 제3대구치의 교합면 상아질을 노출시키고 GI그룹에서는 dentin conditioner를 처리 후 2% chlorhexidine을 적용시키고, 산부식 접착제 그룹에서는 인산 산부식을 시행하고 2% chlorhexidine을 적용 후 3단계 산부식형 상아질 접착제 (Scotchbond Multipurpose, SM), 2단계 산부식형 상아질 접착제 (Single Bond, SB)를 도포하고, 자가부식 접착제 그룹에서는 2% chlorhexidine 적용 후 자가부식 상아질 접착제 (Clearfil Tri-S, TS)를 도포한다. 이후 복합 레진 (Z-250)과 GI (Fuji-II LC)를 충전한 시편을 $1\;mm^2$의 단면을 갖는 beam으로 제작하여 열순환 하지 않거나, 10,000회 열순환 ($5\;{\sim}\;55^{\circ}C$)하였다. Universal testing machine (EZ-test; Shimadzu, Japan)에서 cross head speed 1 mm/min로 인장력을 가하여, 미세인장결합강도를 측정하였다. 실험 결과는 유의수준 0.05 level에서 two-way ANOVA를 이용하여 통계분석하였다. 그 후 파절된 시편의 파괴 양상을 현미경 (SEM)으로 관찰하여 다음과 같은 결론을 얻었다; 1. 2% CHX을 적용한 모든 실험군에서 상아질과의 미세인장결합강도가 증가하였고, 열순환은 상아질과의 미세인장결합강도를 감소시켰다 (P > 0.05). 2. CHX 적용 후 열순환 한 군은 CHX을 적용하지 않고 열순환한 군에 비하여 상아질과의 미세인장결합강도가 높았으며, 특히 GI와 TS군에서 유의한 차이를 나타내었다 (P < 0.05). 3. 파괴 양상 분석 결과, 혼성층에서의 접착성 파괴를 보이며, CHX을 적용하면 혼성층 기저부에서 상부로 파괴 부위가 옮겨가는 양상을 나타내었다. 이상의 연구 결과를 토대로, MMPs 억제제인 2% CHX은 글래스 아이오노머 시멘트와 상아질 접착제의 초기 미세인장결합강도에는 영향을 미치지 않으며, CHX 적용이 접착내구성을 유지하는데 도움이 되었다.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.177-184
• /
• 2020

목적:본 연구의 목적은 절삭가공과 적층가공으로 제작한 의치상과 직접 첨상용 레진과의 인장결합강도를 열중합형 의치상과 직접 첨상용 레진의 인장 결합강도와 비교 및 평가하여 절삭가공과 적층가공으로 제작한 의치상의 직접 첨상을 임상에 활용하고자 하는 것이다. 재료 및 방법:열중합형 의치상 레진(Lucitone 199), 절삭가공용 의치상 레진(VITA VIONIC BASE), 적층가공용 의치상 레진(NextDent Base)을 이용해 가로 25 mm × 세로 25 mm × 높이 3 mm의 직육면체 형태로 제작하였다. 제작한 의치상 레진 시편을 30일간 37℃ 증류수에 보관한 뒤, 건조하여 자가중합형 polyethyl methacrylate (PEMA) 직접 첨상용 레진(REBASE II Normal)을 사용해 결합하였다. 절삭가공과 적층가공용 의치상 레진을 실험군으로, 열중합형 의치상 레진을 대조군으로 설정하고 각 군 당 10개의 시편을 제작하였다. 모든 시편을 24시간 동안 37℃ 증류수에 보관한 뒤 꺼내어 만능시험기를 이용해 10 mm/min의 cross head speed로 인장결합강도를 측정하였고, 파절 양상을 관찰하여 접착 파절, 응집 파절, 혼합 파절로 분류하였다. 의치상의 제작 방법에 따른 직접 첨상용 레진과의 인장결합강도를 일원배치 분산분석으로 분석하였고 사후검정(Bonferroni's method)을 시행하였다 (α= .05). 결과:절삭가공용 의치상 레진과 직접 첨상용 레진과의 인장결합강도(2.33 ± 0.39 MPa)는 열중합형 의치상과 직접 첨상용 레진과의 인장결합강도(2.45 ± 0.39 MPa)와 통계적으로 유의성 있는 차이가 없었다 (P > .999). 적층가공한 의치상 레진과 직접 첨상용 레진과의 인장결합강도(1.23 ± 0.36 MPa)는 나머지 두 군보다 유의성 있게 낮았다 (P < .001). 열중합형과 절삭가공한 의치상에서는 혼합 파절이 가장 많이 나타났으며, 적층가공한 의치상에서는 혼합 파절과 접착 파절이 동일한 빈도로 나타났다. 결론:직접 첨상용 레진과 다양한 방법으로 제작한 의치상의 인장결합강도를 비교하였을 때 적층가공으로 제작한 의치상은 절삭가공으로 제작한 의치상, 열중합형 의치상보다 유의하게 낮은 인장결합강도를 보였다.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.310-321
• /
• 1999

In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).