• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.67-76
• /
• 2011

동토지역 말뚝기초의 지지력은 말뚝과 토사의 접촉면에서 작용하는 동착강도에 지배된다. 말뚝주변 토사 내 간극수의 동결로 인해 발현되는 동착강도는 동토지반 기초설계에 있어 가장 주요한 설계정수로 고려되고 있다. 지난 50년간 동착강도에 대한 연구가 다각도로 수행되어 왔으나, 대부분 동결온도와 지중온도를 고정조건으로 그 영향력을 고려하지 않은 채 토사종류, 말뚝종류, 재하속도 등의 영향인자를 분석하기 위한 목적으로 수행되었다. 본 연구에서는 동결온도와 마찰면에 작용하는 수직구속응력을 주요 변수로 적용하고, 토사종류, 말뚝종류, 재하속도 등은 고정조건으로 적용하여 직접전단방식의 동착강도 측정실험을 수행하였다. 실험재료로는 표면 가공이 용이하여 거칠기를 정밀하게 조절할 수 있는 알루미늄 모형과 주문진표준사를 활용하였다. 실험은 상온(> $0^{\circ}C$), $-1^{\circ}C$, $-2^{\circ}C$, $-5^{\circ}C$, $-10^{\circ}C$의 동결온도및 1atm, 2atm, 3atm의 수직구속응력 조건에서 수행되었으며, 그 결과를 바탕으로 동결온도와 수직구속응력이 동착강도에 미치는 영향을 분석하였다. 전반적으로 동착강도는 동결온도가 낮아질수록, 혹은 수직구속응력이 커질수록 증가하는 경향을 보였으며, 특히 단위온도차에 따른 동착강도의 증가율이 1)급증하는 구간과 2)점진적으로 감소하는 구간을 뚜렷하게 나타내며 변화하는 특성을 보였다. 또한, 동결온도의 저하에 따라 동착강도의 변화를 지배하는 요소가 마찰각에서 부착력으로 변화하며 수렴구간을 형성하는 경향을 나타냈다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.401-412
• /
• 1998

The aim of this study was to measure the regional micro-shear bond strength of dentin bonding agents to dentin, and to investigate the relationship between the micro-shear bond strength and two dentinal characteristics ; Vickers hardness and remaining dentin thickness. Twenty-four freshly extracted, noncarious human molars were selected for this study. The materials tested in this study consisted of two commercially available dentin bonding agents (MAC-BOND, ONE-STEP) and two restorative light-cured composite resins (AELITEFIL, Z100). The occlusal or side surface of tooth crown was sectioned to expose dentin, and the exposed surface was finally polished with # 600 sandpaper. Four groups of application methods were used combining the filling materials and the dentin bonding agents. The composite resin-attached tooth specimens were embeded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of 1mm $\times$ 1mm. Nine specimens were obtained from each tooth. The cut specimens were divided into three groups depending on the position of the dentin bonding surface. The micro-shear bond strength, remaining dentin thickness, and dentinal hardness were measured. Experimental results were then statistically analyzed with ANOVA. t-test, Scheffe test, and regression analysis. From this experiment, the following results were obtained : 1. In the case of occlusal surface bonding, the pooled micro-shear bond strength of ONST-AELIT group (16.62 MPa) was significantly higher than that of MACB-AELIT group (9.91 MPa) (p<0.05). However, there was no significant difference in the micro-shear bond strength depending on the dentin position (p>0.05). 2. In the case of side surface bonding of crown, the pooled micro-shear bond strength of four different bonding groups was not significantly different among each other (p>0.05). However, in three of the test groups (ONST-AELIT, MACB-Z100, ONST-Z100), the micro-shear bond strength to the lower 1/3(III) position was significantly lower than that to middle 1/3(II) position of surface (p<0.05). 3. In the ONST-AELIT bonding group, the pooled micro-shear bond strength to the occlusal surface was significantly lower than that to the side surface of crown (p<0.05). 4. There was no significant correlation between the micro-shear bond strength and dentin hardness / remaining dentin thickness (p>0.05).

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.165-170
• /
• 2012

The resin bonded diamond wheel is used to grind the difficult-to-cut materials. Traditionally, the resin bonded diamond wheel is manufactured without any pores due to the characteristics of resin bond. In this study, two porous resin bonded diamond wheel were made and the grinding characteristics were compared with traditional nonporous ones. The experimental results indicate that the porous resin bond diamond wheel require less grinding forces and powers.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.55-57
• /
• 1996

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.197-200
• /
• 2005

This paper presents an analytical model for evaluation of Tension Stiffening Effect by actual Bond-Slip relationships between the reinforcement and the surrounding concrete. The presence of longitudinal splitting cracks was found to significantly after the tension stiffening. The model is applied to the longitudinal splittings cracks and derived to Tension stiffening model. The predicted values are shown to be in good agreement with the experimentally measured data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1697-1699
• /
• 1996

EPDM compound can be cured with either the sulfur and peroxide based systems. In this study, heat resistance and weatherability of EPDM compounds depending on curing systems were investigated. The test results showed that the peroxide-cured EPDM was more resistant to heat ageing and UV photo-degradation than the sulfur-cured EPDM and it is due to C-C bond is more stable than C-S, S-S bond.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7053-7060
• /
• 2015

콘크리트 부재에서 FRP-보강근의 사용은 철근의 사용에 비해서 일반적으로 낮은 탄성계수와 부착성능으로 인하여 보다 넓은 균열폭을 초래 할 수 있다. 따라서 본 연구에서는 9개의 장방형보와 3개의 T형보로 구성된 총 12개의 시험체들로부터 4점가력 휨실험을 통하여 얻어진 균열폭 결과들과 기존 ACI 440.1R-06 제안식으로 계산된 결과들을 비교 분석하여 설계변수들이 균열폭에 미치는 영향과 적용 범위에 대한 문제점들을 파악하였다. 결과로서 주요 설계변수의 하나인 변동계수, $k_b$ 값은 0.6~1.88 범위에서 1.05의 평균값과 약 40%의 높은 변동계수를 나타냈다.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.107-116
• /
• 1999

The damage in concrete structures generally starts with microcracking and thus it is important to find and explore these microcracks in concrete in order to ensure appropriate safety and serviceability. The purpose of the present study is to identify the damage characteristics of concrete structures due to cracking by employing the acoustic emission techniques. A comprehensive experimental study has been done. The cracking damage under tensile and flexural loadings have been identified and the bond damage between steel and concrete have been also characterized. It is seen that the amplitudes and energy level of Acoustic Emission(AE) events are found to be relatively small for bond cracking damages and large for tensile cracking damages. The characteristic equations of the AE events for various cracking damages have been proposed based on the present test data. The internal microcracks are progressively developed ahead of a visible actual crack and the present study clearly exhibits these damage mechanism for various types of cracking in concrete. The present study provides useful data which can be used to identify the various types of cracking damages in concrete structures. This will allow efficient maintenance of concrete structures through monitoring of internal cracking based on acoustic emission.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.47-54
• /
• 2011

Purpose: To investigate shear bonding strength between dental zirconia ceramics with different surface treatment and metal bracket. Methods: Zirconia ceramics(LAVA, 3M ESPE, USA) were divided to 4 groups according to their surface treatment; no surface treatment(G1), sand blasting(G2), silane coating(G3), and sand blasting+silane coating(G4). Specimens were bonded to metal bracket using resin bond($Transbond^{TM}XT$, 3M Unitek, USA). Shear bond strength was measured using universal test machine(3366 INSTRON. U.S.A) with cross head speed of 1 mm/min. Microstructural investigation for fracture surface was performed after shear test. Results: Shear bonding strengths of single surface treatment groups (G2 and G3) were higher than no treatment group(G1). Combined Treatment Group (G4) showed the highest shear bond strength of 9.15MPa. Microstructural observation shows that higher shear bonding strength was obtained when debonding was occurred at metal bracket/resin interface rather than zirconia ceramic/resin interface. Conclusion: Surface treatment of zirconia is necessary to obtain higher bonding strength. Combined treatment can be more effective when surface the surfaces are kept clean and homogeneous.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.745-751
• /
• 2009

The anchor is used extensively for a cutting slope, an earth retaining wall, an uplift resistance of sub-structures and so on at civil engineering projects and is classified by aim in use, tendon material, and ground/tension fixing type. It can be distinguished extensively into friction type, bearing type, and complex type by ground fixing type. Generally, bond length of friction type anchor has application to 3~10m depending on the friction-resistance characteristics. In this study, 'DEW(double enlargement wedge) bearing type anchor' of new concept is devised. The bond length is about 0.6~0.8m. It can be used on the ground to have the strength characteristics above it of weathered rock. There are merits which are 'period reduction' and 'cost saving' through the minimum of the boring length. In addition, it is so called environmentally friendly Methods because it can reduce the quantity of carbon dioxide through the reducing drilling machine operation time.