• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1453-1459
• /
• 2012

본 연구에서는 보이스코일 모터와 압전 구동기를 동일 축으로 배치함으로써 초정밀 위치결정뿐만 아니라 동특성을 개선할 수 있도록 하는 듀얼 스테이지를 다룬다. 듀얼 스테이지는 모델링이 엉성할 경우 오히려 나쁜 동특성을 보이는 단점이 있다. 이 논문은 본드그래프를 이용하여 듀얼 스테이지를 모델링하고 동적 상태방정식을 본드그래프에서 유도하였다. 또한 동특성을 향상시키기 위한 보상기의 설계 예시를 보이고 있으며, 시뮬레이션을 통해 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.77-84
• /
• 1992

In the most of acoustic system with low flow rate and low pressure level, one-dimensional, linear modeling techniques are used very well. At low frequency, the tube is modeled as inertia element and cavity as capacitance element, and to extend the range of frequency normal mode oscillators are represented. Bond graph modelling techniques are proposed to predict TL (Transmission Loss) and time response which is impossible by transfer matrix in muffler system. A simple acoustic filter which consists of several tubes and cawities is analyzed in both time and frequency domain.

• 한국통신학회논문지
• /
• 제16권4호
• /
• pp.309-318
• /
• 1991

본 논문에서는 기준신호와 응답의 편차를 억제하기 위해서 이용하는 적분기와 직류전동기를 본드그래프로 구성하여 직류전동기의 속도 제어계에서 관성이나 외란 그리고 부하변동에 의한 파라미터나 응답변동에 대해서 높은 적응성을 갖는 모델추종형 servo 제어기를 본드그래프로 설계하였으며 이 본드그래프 모델링기법이 제어기의 동작 해석 및 설계에 유효함을 확인하였다.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.1-22
• /
• 2007

The energy efficiency of a self-powered wireless sensing system for pressure monitoring in injection molding is analyzed using Bond graph models. The sensing system, located within the mold cavity, consists of an energy converter, an energy modulator, and a ultrasonic signal transmitter. Pressure variation in the mold cavity is extracted by the energy converter and transmitted through the mold steel to a signal receiver located outside of the mold, in the form of ultrasound pulse trains. Through Bond graph models, the energy efficiency of the sensing system is characterized as a function of the configuration of a piezoceramic stack within the energy converter, the pulsing cycle of the energy modulator, and the thicknesses of the various layers that make up the ultrasonic signal transmitter. The obtained energy models are subsequently utilized to identify the minimum level of signal intensity required to ensure successful detection of the ultrasound pulse trains by the signal receiver. The Bond graph models established have shown to be useful in optimizing the design of the various constituent components within the sensing system to achieve high energy conversion efficiency under a compact size, which are critical to successful embedment within the mold structure.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.521-527
• /
• 2002

This paper presents a dynamic modeling and a robust PID controller design process for the wire bonder head assembly. For the modeling elements, the system is divided into electrical system, magnetic system, and mechanical system. Each system is modeled by using the bond graph method. The PID controller is used for high speed/high accuracy position control of the wire bonder assembly. The Taguchi method is used to evaluate the more robust PID gain combinations than conventional one. This study makes use of an L18 array with three parameters varied on three levels. Computer simulations and experimental results show that the designed PID controller provides more improved signal to noise ratio and reduced sensitivity than the conventional PID controller.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.21-28
• /
• 2002

This paper presents a dynamic modeling and a robust PID controller design process for the wire bonder head assembly. For modeling elements, the system is divided into electrical part, magnetic part, and mechanical part. Each part is modeled using the bond graph method. The PID controller is used for high speed/high accuracy position control of the wire bonder assembly. The Taguchi method is used to obtain the more robust PID gain combinations than conventional one. This study makes use of an L18 array with three parameters varied on three levels. Results of simulations and experimental show that the designed PID controller provides a improved ratio of signal to noise and a reduced sensitivity improved to the conventional PID controller.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.747-753
• /
• 2001

This paper presents a dynamic modeling and a robust PID controller design process for the wire bonder head assembly. For the modeling elements, the system is divided into electrical system, magnetic system, and mechanical system. Each system is modeled by using the bond graph method. The PID controller is used for high speed/high accuracy position control of the wire bonder assembly. The Taguchi method is used to evaluate the more robust PID gain combinations. This study makes use of an L18 array with three parameters varied on three levels. Computer simulations and experimental results show that the designed PID controller provides more improved signal to noise ratio and reduced sensitivity than the conventional PID controller.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.71-77
• /
• 2002

In this study, a dynamic model of proportional pressure control valve using the bond graph and a predictive controller are presented in the form of dynamic matrix control which is concerned with a design method of digital controller for the electro hydraulic servo system. The bond graph can be utilized for all types of systems which involve power and energy, and it is applied to a propotional pressure control valve in this study. Recently, many researchers suggested that better control performance could be obtained by means of the predictive controls with future reference input, future control output and future control error. The Predictive controller is very practical because the controller can be easily applicable to a personal computer or a microprocessor. This study investigates through numerical simulations that hydraulic system with the predictive controller shows very good control performances.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.96-102
• /
• 2000

Spinning mechanism is generally used in coasting process on grass plates. Rebounding PR(Photo Resist) which leads to occur inferiority of coating process is caused by vibrational energy of whole coating system. In this study, the sensitivity analysis is performed to analyze and reduce vibrational terms in the spin coating system. The sensitivity analysis is bared on the numerical expression of this system. By the bond graph method. power flow of each system is represented by some basic bond graph elements. Any energy domain system is modeled using the unified elements. The modelled spin coater system is verified with power spectrum data measured by FFT analyzer. As the results of verifying model parameters and sensitivity analysis, principal factors causing vibration phenomenon are mentioned. A study on vibration method in the spin coating system is discussed.

• 한국지능시스템학회논문지
• /
• 제16권6호
• /
• pp.677-682
• /
• 2006

멀티-도메인 공학시스템은 전기, 기계, 유압, 열등의 구성요소를 포함하고, 시스템 구성이 복잡하여 설계에 많은 어려움을 가지고 있다. 최적의 설계를 위해서는 각 도메인에 대한 통합된 설계 방법과 자동적이고 효율적인 탐색방법이 요구된다. 본 논문은 도메인에 독립적인 모델링 도구인 본드 그래프(Bond Graph)와 대규모 공간 해의 탐색에 접합한 진화 알고리즘의 일종인 유전 프로그래밍(Genetic Programming)를 결합하여 멀티 도메인 동적시스템에 대한 디자인 해를 자동적으로 생성해주는 설계 방법을 제시하였다. 제안된 설계방법의 효용성을 입증하기 위해서 3가지 서로 다른 도메인을 가진 아나로그 필터, 전동프린터 드라이브, 에어펌프 시스템에 대한 설계 결과가 기술된다.