• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.1-7
• /
• 2014

For the resistance spot welds of CR1180 and GA1180 TRIP steels, the weld quality evaluation method using the digitalized X-ray transmission imaging apparatus was investigated in comparison with the crosssectional examination method. In the case of the resistance spot welding of CR1180, three circular regions, such as WZ(white zone), GZ(grey zone) and DZ(dark zone), appeared on X-ray image and they corresponded to the diameters of indentation mark, nugget and corona bond, respectively. The variation of X-ray transmission thickness due to the thickness variation of the weld seemed to be mainly responsible for the formation of those contrasts. The X-ray image contrast formed from the variation of transmission thickness at the outer border line of DZ could also enable the inspections of the notch shape, nonuniformity of the welding pressure and spatter from its sharpness, concentricity and the normal straight line, respectively. The X-ray image of the resistance spot weld of galvannealed GA1180 TRIP steel was very similar to that of CR1180 TRIP steel except the crown shaped outer border line of DZ which was considered to be due to the melting behavior of zinc having the boiling temperature even lower than the melting temperature of steel.

• Korean journal of food and cookery science
• /
• v.11 no.1
• /
• pp.20-25
• /
• 1995

The effects of cooking on the dietary fiber content in rice, brown rice, yellow soybean and black soybean were investigated. The dietary fiber contents were analyzed by Prosky's method(AOAC method) after boiling, microwave heating and autoclaving of the sample. It was showed that the different cooking methods resulted in different effects on the insoluble dietary fiber contents. Except yellow soybean, cooking time had little effect on insoluble dietary fiber contets in the other samples. The contents of soluble dietary fiber were generally increased by cooking. Increased cooking time reduced the content of soluble dietary fiber in brown rice but increased in rice. However, no significant differences caused by cooking time were observed for soluble dietary fiber in black soybean. The effects of cooking method on the total dietary fiber contents were similar to those of insoluble dietary fiber. The reasons for this might be that the main fraction of total dietary fiber was insoluble forms and the content of total dietary fiber was calculated as the sum of insoluble and soluble dietary fiber content.

• Korean journal of food and cookery science
• /
• v.9 no.2
• /
• pp.109-115
• /
• 1993

This study was attempted to investigate the current status of industry food service management in Chonbuk province. The survey for the analysis was conducted through the questionaires to dietitian. The following results are to be noted. 1. Only one dietitian was employed regardless of feeding numbers and feeding times, and the average number of cooks comes to 5∼6 persons. Among 51 food service places for the study, 84.3% provided more than two meals a day. Feeding number were 200∼1000 people per one meal (64.7%) and feeding cost amounts to 700∼1000 won per meal per one person. 2. The food preferences and budget were primary considerations in menu planning. The type of menus was a non-selective menu with a seven-day cycle (83.7%). Most of dietitian (94.1%) had control of food purchasing, receiving and checking procedure and prefered placing orders by phone (94.5%) through the purveyors (86.4%). 3. In many food service places (70.5%), the mass food preparation was controlled of cooking method and standardized recipes were not undertaken by management Also, the food quality control such as flavor, texture, appearance and temperature was not fully established in food service system. 4. They used the method of manual dish washing operations (88%) and about 71.4% of them are dependent on boiling method of ultrabiolet light for disinfection of kitchen utensils. 5. The performance rates of dietitian management responsibility showed as nutritional management 100%, working management 72.4%, sanitary management 85.6%, personnel management 64.5% and nutrition education 40.7%, but they did not perform the objective and systematic their own responsibility as specialized dietitian because only few dietitian used basic check list and management tools. In addition, dietitian (21.6%) worked beyond their field. In the result, only 54.9% dietitian have satisfied their own occupation and most of them emphasized on practical working in educational curriculums.

• Korean Journal of Acupuncture
• /
• v.22 no.2
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.4
• /
• pp.533-543
• /
• 2009

The objective of this study was to compare the differences of opinion, purchasing behavior, and recognition of food labeling and nutrition labeling of frozen processed food between employees and non-employees in the frozen food industry. The results of this survey study showed that the group working in the frozen food industry had a positive opinion of frozen processed food compared to the non-employee group who was not working in the food industry. The main reason for the positive opinion of frozen processed food was because it was convenient and easy to prepare while the main concern with consuming frozen processed food was that it was bad for one's health. The most popular menu was western style. Sixty one percent of employees in the frozen food industry preferred the microwave-cooking method, while only 37.9% of non-employees preferred the microwave-cooking method followed by cooking in boiling water (27.6%). There was a significant (p<0.001) difference in the preference of cooking method between these two groups. Most of the respondents considered 'taste' as the most important factor and 32.9% of the respondents selected 'sanitation/health' as the most serious concern for the consumption of frozen processed food. Both groups checked the food & nutrition label to verify the expiration date and the presence of food additives. The non-employee group recognized the need for nutritional information on total calorie, carbohydrate, protein, fat, saturated fat, cholesterol, minerals, vitamins, sodium, and fiber on the nutrition label of frozen processed food.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.63-69
• /
• 2012

Objectives : Decoction, in Korean Medicine, is a pharmacological method of extraction, by boiling, of dissolved chemicals, or herbal prescriptions, which may include stems, roots, bark and rhizomes. Decoctions differ from most teas, infusions, in that they are usually boiled. This study was performed to compare the difference of water decoctions extracted by different decoction extractor and extraction time and to analyze the reason of decoctions extracted by each decoction extractor have different taste. Methods : With water decoction samples by Pressure extractor, Non-pressure extractor and Ultrasonic waves merge extractor for 1 hr, 2 hr and 3 hr were investigated the yield and the concentration of hesperidin and glycyrrhizin by HPLC/DAD system in Pyungwi-san decoction. Results : The samples of each extractor were gradually increased the yield and the concentration of hesperidin and glycyrrhizin. The HPLC pattern of samples is similar. The yield and the concentration of hesperidin and glycyrrhizin of Ultrasonic waves merge extractor was most highest of the three. The rate of increase of the yield and the hesperidin concentration of between 1 hr and 2 hr in Pressure extractor was the most highest of the three. But the concentration of glycyrrhizin in Pressure extractor was relatively similar to Non-pressure extractor. Conclusions : The yield and the concentration of reference compounds in Pyungwi-san water decoction was influenced by extracting method and extracting time. For scientific movement and standardization of extracting medicinal herbs method need to study of extractor validation and to study in vitro and in vivo.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.105-110
• /
• 2015

BACKGROUND: Soy isoflavones, structurally similar to endogenous estrogens, may affect human body through both hormonally mediated and non-hormonally related mechanisms. Heat processing could change chemical compositions. The effects of different thermal processes, boiling and HTHP(high temperature and high pressure) on the composition of isoflavone compounds and total amount of domestic soybeans were investigated in this study. METHOD AND RESULTS: Three different kinds of soybean samples were collected from RDA-Genebank. The samples were extracted using methanol, distilled water, and formic acid based solvent. Also the same solvents were used for mobile phase in UPLC/ToF/MS. All of the isoflavone compounds were analyzed based on the aglycone type of external standard for quantification. The standard calibration curve presented linearity with the correlation coefficient R2 > 0.98, analysed from 1 to 50 ppm concentration. The total isoflavone contents does not change by treatment within the same breed. While "boiling" and "HTHP" processes tend to increase the contents of aglycone and ${beta}$-glucosides, "fresh" soybeans retained the high concentration of malonylglucosides. CONCLUSION: These results have to be considered while developing an effective functional food, from the health while point of view using soybeans.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1784-1791
• /
• 2016

Garlic was subjected to eight different cooking methods (raw, boiling, steaming, microwave cooking, deep-frying, oven-roasting, pan-frying, and pan-roasting) utilized for typical Korean cuisine. Garlic was analyzed for antioxidant activities and physicochemical properties to elucidate effects of cooking. Garlic cooked at higher temperatures showed significantly lower lightness and higher yellowness (P<0.001). In particular, deep-frying and pan-frying resulted in lowest lightness and soluble solid content, indicating that non-enzymatic browning reactions were more facilitated. Compared with raw garlic, all cooked garlic tended to have lower thiosulfinates, presumably due to decomposition into polysulfides and/or leaching into cooking water and oil. Microwave cooking retained organic acids, total reducing capacity, and flavonoids, which can be attributed to low microwave intensity and shorter cooking time under which heat-labile bioactive components might have undergone less decomposition. Cooking significantly increased metal-chelating activity (P<0.001). In addition, oven-roasting and pan-roasting enhanced total reducing capacity and flavonoid content, indicating that thermal treatments increased the extractability of bioactive components from garlic. However, boiling, deep-frying, and pan-frying, in which garlic is in contact directly with a hot cooking medium, reduced antioxidant activities. Deep-frying resulted in largest reduction in DPPH radical scavenging activity of garlic, which correlated well with reduction of total reducing capacity and flavonoid content. The results show that the antioxidant activity of garlic could be affected by cooking method, particularly heat intensity and/or direct contact of the cooking medium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.1
• /
• pp.1-12
• /
• 1985

In an attempt todetermine the optimum heat treatment, the changes in TIS content and in vitro protein digestibility of squid, shrimp, oysterand pollock under various heating conditions were studied. The effect of drying method and cold storage on the in vitro digestibility and TIS content were also studied. Optimal boiling conditions were 1 min, for squid, 0.5min. for oyster(eviscerated), 1 min. for whole oyster, and 5 min. for pollock. Steaming times that yieled products with the highest in vitro digestibility value were: 1 min. at $100^{\circ}C$ for squid, 1 min, at $88^{\circ}C$ for oyster and $1{\sim}2.5min$. at $100^{\circ}C$ for pollock. All of freeze dried samples showed the highest in vitro digestibility value and sundried one were comparble to freeze dried samples except high fat level or noneviscerated samples. Fat content was the nain inhivbitory factor of the seafood enzymic digestion during processing and storage. The multi-enzyme assay, used to predict the quality change of dried seafoods stored in a cold room for long periods of raw seafoods treated with various heating methods, offers many advantages over the convetional methods of determining protein quality.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.19-31
• /
• 1994

The objective of this study is to conduct a thermal-hydraulic analysis on the spent fuel pool and to evaluate a parametric effect for the thermal-hydraulic analysis of spent fuel pool. The selected parameters are the Reynolds Number and the gap flow through the oater gap between fuel cell and fuel bundle. The simplified flow network for a path of fuel cells is used to analyze the natural circulation phenomenon. In the flow network analysis, the pressure drop for each assembly from the entrance of the fuel rack to the exit of the fuel assembly is balanced by the driving head due to the density difference between the pool fluid and the average fluid in each spent fuel assembly. The governing equations ore developed using this relation. But, since the parameters(flow rate, pressure loss coefficient, decay heat, density)are coupled each other, iteration method is used to obtain the solution. For the analysis of the YGN 3&4 spent fuel rack, 12 channels are considered and the inputs such as decay heat and pressure loss coefficient are determined conservatively. The results show the thermal-hydraulic characteristics(void fraction, density, boiling height)of the YGN 3&4 spent fuel rack. There occurs small amount of boiling in the cells. Fuel cladding temperature is lower than 343.3$^{\circ}C$. The evaluation of parametric effect indicates that flow resistances by geometric effect are very sensitive to Reynolds number in the transition region and the gap flow is negligible because of the larger flow resistance in the gap flow path than in the fuel bundle.