• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.411-416
• /
• 2015

Olive flounder Paralichthys olivaceus production has increased gradually in recent years, but prices have fallen. Thus, the development of a variety of processed foods incorporating olive flounder would help to increase the income of fishermen. This study was conducted to investigate the best method for olive flounder ball processing. Clean olive flounder were divided into five portions. Olive flounder meat (100 g with added egg white 39 g) was chopped and then mixed with 10 mL fresh cream and ingredients. The dough was molded into the shape of a ball. The olive flounder balls were then processed by two different methods. In the first method, the flounder ball was boiled in water for 3 min then vacuum-packed in polyethylene film and stored at $-20^{\circ}C$ for 7 days. After 7 days, the ball was thawed and heated in a microwave for 2 min (Sample-1). In the second method, the ball was vacuum-packed in polyethylene film without boiling and then stored at $-20^{\circ}C$ for 7 days before thawing and boiling in water for 3 min (Sample-2). After heating, both types of olive flounder balls were evaluated. Various factors (including the viable bacterial count, chemical composition, pH, hardness, thiobarbituric acid level, salinity, and free amino acid content) were measured, and a sensory evaluation was conducted. Based on the results of the sensory and hardness evaluations, Sample-1 was deemed to be superior to Sample-2.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.4
• /
• pp.292-297
• /
• 2014

DNA extraction is a prerequisite for the identification of pathogens in clinical samples. Commercial DNA extraction kits generally involve time-consuming and laborious multi-step procedures. In the present study, our modified DNA isolation method for saliva samples allows for the quick detection of pathogens associated with dental caries or periodontitis by PCR within 1 h. To release DNA from the bacteria, 1 min of boiling was adequate, and the resulting isolated DNA can be used many times and is suitable for long term storage of at least 13 months at $4^{\circ}C$, and even longer at $-20^{\circ}C$. In conclusion, our modified DNA extraction method is simple, rapid, and cost-effective, and suitable for preparing DNA from clinical samples for PCR for the rapid detection of oral pathogens from saliva.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.743-749
• /
• 2016

We compared two different processing methods for preparing high quality frozen in-shell baby clam products. In the first method, sand and mud were removed from the clams, then they were vacuum packed in polyethylene film, boiled at $97^{\circ}C$ for 6 min, and snap frozen in a cold air blast freezer (sample 1). The second processing method was similar, except the boiling process was excluded (sample 2). Both frozen products were boiled for 4 min, and then shucked and minced. Various quality metrics, such as the opening rates of shells, chemical composition, pH, volatile basic nitrogen (VBN), salinity, thiobarbituric acid (TBA), amino-N, total amino acids and free amino acids were measured, and sensory evaluation was conducted. The opening rates of shells of sample 1 and sample 2 were 98.3% and 4.67%, respectively. The proximate composition of sample 1 and sample 2 was 75.2% and 78.7% moisture, 19.7% and 16.2% crude protein, 2.45 and 2.2% crude lipid, 2.8% and 2.1% ash, and 2.1% and 1.9% salinity, respectively. The L, a, b and ${\Delta}E$ values were similar: 48.6 and 49.2, 3.9 and 3.9, 15.7 and 15.5, and 50.7 and 50.1 for sample 1 and sample 2, respectively. The sensory evaluation score of sample 1 was higher than that of sample 2. Sample 1 was deemed to be superior to sample 2; therefore, we determined that the boiling process is needed for manufacturing high-quality frozen clam products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.42-50
• /
• 1984

The Jung Kwa is of the traditional Han Kwa which boiled in sugar or honey. This study summerized the history of the Jung Kwa by the cook book which introduced 1600 years from now. The purpose of this study was to find out the most scientific and effective preparation process of 'Jung Kwa' of lotus root by the preference sensory test and the mechanical method of penetrometer. In this paper the effect of changes in boiling method mixture ratio of water, sugar, and honey, boiling time, upon the appearance, taste, texture and color of 'Jung Kwa' has been studied. The results are as follows : (1) The Jung Kwas which introduced in the cook books are 34 different kinds and the most well-known one among them is lotus root Jung Kwa. (2) In the beginning Jung Kwa boiled in honey but, Jung Kwa which boiled in sugar was introduced at first in 'Eum Sick Bup' Published in 1843. (3) The lotus root cut in a thickness of 7 mm, water 150 ml lotus root 100 g and vinegar 4 ml are mixed and boiled for 12 minutes. To prevent from browning reaction vinegar is added, In this case, the hardness is 5.86 min.(5) The most proper quantity of water in appearance, taste, texture and color is 200 ml. In this case, the hardness is 3.3 mm. (5) The most proper quantity of sugar in appearance, taste, texture and color is 30 g. In this case, the hardness is 3.8 mm.(6) The most proper quantity of honey in appearance, taste, texture and color is 40 g. In this case, the hardness is 4.9 mm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1350-1357
• /
• 2017

General component and mineral contents according to species of Capsicum annuum were investigated. In addition, chuichung cucumber, white dadagi cucumber, and yellowish overripe cucumber were cooked by using seven different methods (boiling, steaming, pan-cooking, roasting, pan-frying, deep-frying, and microwaving), and retention rates of general components and minerals according to species were evaluated. Weight loss was observed in all cucumber species using all cooking methods. Most general component and mineral contents of C. annuum samples were significantly different according to species, and cooking method (P<0.05), whereas Fe and Cu contents were not significantly affected by species and cooking method, respectively. As a result, the highest protein, fat, ash contents were detected in deep-fried C. annuum, and high moisture contents were detected in raw, boiled, and steamed C. annuum. High mineral contents were detected in roasted and microwaved chuichung cucumber, deep-fried white dadagi cucumber and yellowish overripe cucumber. Retention rates of C. annuum by cooking method, ranged from 30~100% for protein, 10~100% for fat, 35~90% for moisture, and 30~100% for ash. High retention rates were observed for minerals in boiled, roasted, and microwaved chuichung cucumber, and deep-fried white dadagi cucumber and yellowish overripe cucumber. However, in yellowish overripe cucumber, mineral retentions rate were remarkably lowered by boiling and steaming, resulting in rates of 20~45%. These results were the data used as the basis for development of cucumbers.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.252-259
• /
• 2001

It is derived for the temperature profile in a cylindrical and planar shape capillary pumped loop evaporators subject to a uniform heat flux prior to the initiation of boiling using the finite difference method. The results of the analysis allow for the determination of applied power levels for which nucleation is likely to occur only within the vapor grooves of the evaporator while maintaining subcooling in the liquid core, thereby increasing the likelihood of a successful startup. Also, limits are found for which additional increases in the applied heat flux do not increase the temperature difference between the vapor grooves and the wick-liquid core interface. Several advantages of larger diameter evaporators observed experimentally in startup are explained and quantified by the model. This analysis is appropriate for standard capillary pumped loop evaporators during a fully-flooded startup as well as starter pump designs and loop heat pipes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.552-560
• /
• 1988

ZnO low voltage varistor was obtained by varying a) the amount of seed grains, b) the size of seed grains, and c) sintering temperature. Also, the optimum condition for fabricating the ZnO seed grains was studied. Large ZnO seed grains were obtained by washing a ZnO sintered body containing 1m/of BaCO3 in boiling water. When the seed grains were added, abnormal grain growth occurred, and the varistor voltage sharply decreased. However, when more than 5w/o of seed grain content was added, the varistor voltage gradually increased. When 10w/o seed grains of 75~106${\mu}{\textrm}{m}$ were added and sintered for 2 hours at 1200 to 125$0^{\circ}C$, low voltage varistor properties with V1mA/mm of 19V/mm and nonlinear exponent ($\alpha$) of 12 occurred.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.193-197
• /
• 2010

Water cooling ducts are installed in the exhaust diffuser for high altitude tests of rocket engine to protect diffuser from high-temperature combustion gas. The mass flow rate and pressure of cooling water is designed to prevent boiling of cooling water in the ducts. Therefore, the estimation of maximum temperature of duct wall is important parameter in design of cooling system, especially pressure of cooling water. The method for predicting maximum temperatures of duct walls with variation of coolant flow rates was derived theoretically.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1219-1224
• /
• 2004

The objective of this study is to propose an experimental calibration facility in which a heat flux sensor can be calibrated under conductive condition by using helium gas. The heat flux calibration facility was designed, simulated and manufactured for use in a high heat transfer condition. It delivers heat fluxes up to a maximum of 35 KW $m^{-2}$. A copper block heated electrically with 3.5 KW power is designed to produce uniform temperature up to 600 K across its face. High heat fluxes are provided between hot plate and cold plate by 1 mm height helium filled gap. A cold plate is maintained around 300 K through pool boiling using a refrigerant and water-cooled heat exchanger. A simulation was conducted to verify the design of the main test section. To verify the performance of calibration facility, a heat flux sensor was examined. The measured heat fluxes were compared to the calculated one.