• Journal of Powder Materials
• /
• v.13 no.2 s.55
• /
• pp.108-111
• /
• 2006

Aluminum hydroxides were synthesized by a simple electrolytic reaction of aluminum plates. The aluminum hydroxide, boehmite (AlO(OH)), was predominantly formed in the application of electrical potential at and above 30V, while the mixture of bayerite ($Al(OH)_3$) and boehmite (AlO(OH)) phases were formed below 20V. The boehmite has a clear fibrous structure controlled on nanometer scale. On the contrary, the bayerite consists of the typical hourglass or semi-hourglass shaped coarse crystals as a result of aggregation of various crystals stacked together. The specific surface area of the boehmite nanofiber was markedly high, approaching at about $302\;m^2/g$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.428-429
• /
• 2006

Aluminum hydroxides were synthesized by a simple electrolytic reaction of aluminum plates. The aluminum monohydroxide, boehmite(AlO(OH)), was predominantly formed by the application of an electrical potential above 30V, while the mixture of the bayerite$(Al(OH)_3)$ and boehmite(AlO(OH)) phases were formed below 20V. The boehmite has a clear fibrous structure which is controlled on a nanometer scale. On the contrary, the bayerite consists of the typical hourglass or semi-hourglass shaped coarse crystals as a result of an aggregation of the various crystals stacked together. The specific surface area of the boehmite nanofiber was remarkably high, reaching about $300m^2/g$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.286-290
• /
• 2012

Boehmite (AlOOH) powder was synthesized using waste aluminium etching solution. In waste solution, precipitated phase was gibbsite ($Al(OH)_3$), and boehmite (AlOOH) phase was obtained at pH of 7 and 8 controlled by addition of acid. Boehmite powder was obtained by washing process to remove the Na ion in precipitated solution. Mean particle size of obtained powder was 40 nm. Boehmite phase transformed to ${\alpha}-Al_2O_3$ phase via ${\gamma}-Al_2O_3$, ${\delta}-Al_2O_3$, and ${\Theta}-Al_2O_3$.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.1-6
• /
• 1999

Mullite was synthesized by adding industrial by-products, Al(OH)3 and boehmite, to a natural kaolin of pink A-grade. The attrition milling method, which has simultaneously milling and mixing effects, was carried out. The specimens were formed by uni-axial pressing of 1.5 ton/$\textrm{cm}^2$ and then fired. When the Al(OH)3 was added, the flexural strength of 71.8 wt% Al2O3 specimen fired at 1600$^{\circ}C$ for 4 hrs was 22.3 MPa and the amount of synthesized of 71.8 wt% Al2O3 specimen fired at 1600$^{\circ}C$ for 10 hrs was about 85%. When the boehmite was added, the flexural strength of 68 wt% Al2O3 speciment fired at 1600$^{\circ}C$ for 10 hrs was 147 MPa, and the high purity mullite of about 95% was synthesized for 71.8 wt% Al2O3 specimen fired at 1600$^{\circ}C$ for 10 hrs.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.118-123
• /
• 2004

A formation of aluminum hydroxide by hydrolysis reaction in the water has been studied by using nano aluminum powder fabricated by pulsed wire evaporation(PWE) method. The hydroxide type and morphology depending on temperature and pH were examined by structural analysis. The Boehmite($Al_2O_3$.$H_2O$ or AIO(OH)) was predominantly formed in high temperature region over 4$0^{\circ}C$, while the Bayerite($Al_2O_3$.$H_2O$ or $Al(OH)_3$) below $30^{\circ}C$ of hydrolysis temperature. The Boehmite formation was preferred to the Bayerite in acidic solution in the same hydrolysis temperature. The slowly formed Bayerite phase showed facet crystalline structure, while the fast formed Boehmite was fine fiber with a large aspect ratio of several nm in diameter and several hundred nm in length, and with much larger specific surface area(SSA) than that of Bayerite. The highest SSA was about $420m^2$/g.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.273-278
• /
• 2015

${\alpha}-Al_2O_3$ was synthesized by solvothermal synthesis using ${\alpha}-Al_2O_3$ seed, precursor of fine boehmite (Al(OOH)) or gibbsite ($Al(OH)_3$), and 1, 4-butanediol solvent. The seed content and precursor type were selected as variables in order to synthesize ${\alpha}-Al_2O_3$. The formation time of ${\alpha}-Al_2O_3$ was reduced and the size of the particles was decreased with addition of the seed. When the seed content was increased, the size of the synthesized ${\alpha}-Al_2O_3$ was reduced. Morphologies of the as-synthesized ${\alpha}-Al_2O_3$ with ${\alpha}-Al_2O_3$ seed were polyhedron-shaped, while the shape was plate-like or polyhedral without the seed, depending on the additives or the average particle size of the boehmite precursor. The aggregation of as-synthesized ${\alpha}-Al_2O_3$ from boehmite was smaller than that from gibbsite. As-synthesized ${\alpha}-Al_2O_3$, with 140 nm size, was obtained by using the seed and boehmite precursor.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.53-59
• /
• 1977

A method of synthesizing $NaAlCO_3(OH)_2$ (Dawsonite) and $KAlCO_3(OH)_2$, was investigated by blowing $CO_2$ gas into sodium and potassium aluminate solutions. The reactions were accomplished at a temperature of 80 to $90^{\circ}C$, while $CO_2$ gas was blowing into the solutions which the molar ratios of $Na_2O/Al_2O_3,\;and\;K_2O/Al_2O_3$ were 6 to 8 and 8 to 10, respectively. It was observed that highly purified Dawsonite and $KAlCO_3(OH)_2$ are produced when Alumina is present in Boehmite at an equilibrium solid phase with a large amount of $HCO_3^-$ in the solutions. The rational formulas of Dawsonite and $KAlCO_3(OH)_2$synthesized under the conditions should be expressed as $NaAlO(OH)HCO_3\;and\;KAlO(OH)HCO_3$, respectively, by IR analysis. In addition, electron microscopic observation also indicated that Dawsonite in a fibrous crystal and $KAlCO_3(OH)_2$ in a needleshaped crystal.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.149-157
• /
• 2002

Spectral emissivity depends on the surface conditions of the materials. The mechanisms that affect the spectral emissivity in anodic oxide films on aluminum were investigated. The aluminum specimens were anodized in a sulfuric acid solution and the thickness of the resulting oxide film formed changed with the anodizing time. FT-IR spectrum analysis identified the anodic oxide film as boehmite ($Al_2$$O_3$.$H_2$O). Both the infrared emisivity and reflectivity of the anodized aluminum were affected by the structure of the anodic oxide film because Al-OH and Al-O-Al have a pronounced absorption band in the infrared region of the spectrum. The presence of an anodic oxide film on aluminum caused a rapid drop in the infrared reflectivity. An aluminum surface in the clean state had an emissivity of approximately 0.2. However, the infrared emissivity rapidly increased to 0.91 as the thickness of the anodic oxide film increased.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.51-51
• /
• 2006