• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.203-208
• /
• 2008

Recently, the modern society in development and industrial growth is investing a lot of time and much effort to improvement and environment of life quality. Thus, the casting tape which uses environmentally friendly and human body friendly water hardening process Polymer is rapidly substituted for the gypsum cast product which has been plentifully used in medical treatment. Until currently, prior researches have a tendency to focusing the analysis about chemical creation expense and reaction quality rather than the issue about optimization of the process for this polymerization. In the polymerization process which has been accomplished with actual same chemical creation expense, there has been a problem which is the possibility of getting a different result. This is because the optimization of respectively control factors is not accomplished which affect at polymerization process. Therefore, this research sees the chemical qualities of casting tape Polymer, consequently selects the polymerization process which is suitable. And, by using a experimental design, this research will evaluate the affects which the respective factors have on remaining NCO and viscosity. futhermore, this research will carry out the process optimization which can get the above results.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.629-636
• /
• 2011

Objective: The aim of this study is developing an elderly automatic showering system by optimizing nozzle position and angle of water injection on ergonomics approach. Background: The elderly living in nursing home or hospital were increased by an aging population. Helping the elderly on showering is so hard. In addition, the existing showering/bathing systems are not effective because shower pattern of the elderly and washed range of nozzle were not considered. Method: Firstly, basic specification were determined by anthropometric approach. Secondly, position of nozzle and angle of water injection were determined through observation of elderly behavior on showering. And, finally, they were optimized by washing test and showering simulation. Results: On showering importance of body parts were able to analysis through observation of elderly behavior. The position of nozzle and angle of water injection was able to optimize by showering simulation. The automatic showering system was developed by considering their results. Conclusion: The most important technology of developing a showering system is the determining position of nozzle and angle of water injection, number of nozzle. It was developed by applying its results through user centered-research. Application: The user centered-research of developing products was able to apply directly to develop automatic bath, showering products etc. Further more it was available to apply senior friendly products.

• Asia Pacific Journal of Business Review
• /
• v.3 no.1
• /
• pp.19-38
• /
• 2018

The energy intensity of Nepal is economically not worthy, lacks eco-friendly and importantly not sustainable, and almost four times the average global energy intensity. Considerable efforts have been exercised to reduce the energy gap yet, it is still much to achieve. Nation priority on energy sector was envisaged with promulgation of investment friendly rules and law in hydropower and renewable technology even though, could not harness the sufficient energy. In amid of this acute energy crisis, the government launched the Nepal Energy Efficiency Programme (NEEP) with technical assistance from German International Cooperation (GIZ). Energy Efficiency (EE) practice is the most cost-effective method to reduce the supply and demand gap, reduce on greenhouse gases and pollution, and deter on import of petroleum products which finally improves on trade imbalance. This paper had proposed a framework of energy management team to promote energy efficient technologies in residential consumer. The energy management teams study the past records of energy use pattern of consumers and suggest appropriate technology for energy saving options. The paper provides some reviews of energy efficiency initiatives undertaken by the concern regulatory body which highlights the current status. The comprehensive knowledge acquired through exploratory research is implemented in this paper to identify the various barriers that domestic consumer is experiencing towards the active participation in energy efficiency program launched by the Government of Nepal.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.15-28
• /
• 2017

Today, modern people are exposed to various environmental pollutants such as harmful substances and stress, which can compromise health. Therefore, a healing culture that seeks to enjoy human life based on the healing of body and mind is attracting great attention. The purpose of this study is to develop environmentally friendly natural dyeing considering a healing concept with four elements: color, dye, material, and pattern. The research methods and scope are based on a theoretical review of healing and research on the literature of bedding related to natural dyes, national and international books, the Internet, etc., and naturally dyed bedding. This paper presents actual production research. The results of this study are as follows. First, the elements of color, dyeing, material and pattern were developed through the process of a bedding design development model that applies a healing concept and can be commercialized as a healing bedding product. Second, a healing color proposal was expressed in an intermediate color system of pink, ocher, lavender, and indigo colors for emotional stability, warmth, calmness, comfort and softness. Third, eco-friendly bedding using natural dyes with medicinal efficacy can obtain the healing effect of the natural treatment method, which can aid healthy sleep. Fourth, the pattern used in the bedclothes was a motif of Sarasa embroidery, flower embroidery, ribbon embroidery, and wave quilting motifs to provide psychological stability as a healing concept in the sleeping environment. The natural healing bedding with the healing concept proposed in this study has natural treatment that is beneficial to human health and the development of bedding with natural dyes will lead to an increase of demand for the sleeping environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1354-1358
• /
• 2008

Environmental-friendly nontocxic flame retardant paint which can overcomes the restriction of harmful materials for human body and environments such as Pb, Hg, Cd, $C^{+6}$, PBB/PBDE by EU and domestic Ministry of Environment was developed. Developed paint is the water-soluble organic inorganic hybrid material that VOC(volatility organic compound) discharge is low, and that human riskiness and environmental pollution is minimized not using the kinds of halogen materials. $Mg(OH)_2$, $Sb_{2}O_{3}$, and Zinc borate were used as flame retardant materials, 2% Micell and water were used as binder and solvent, respectively. Results showed the optimum activity was obtained when the ratio of those frame retardant agents($Mg(OH)_2$, $Sb_{2}O_{3}$, Zinc borate made by 1: 2: 2), binder(2% Micell) and water was 1: 0.5: 0.5.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.515-522
• /
• 2017

The natural dyeing industry has been faced with increasing demands of constant needs for environmentally and body friendly clothing products among modern consumers. Natural dyeing has attracted attention as a next-generation technology in green textiles. Dyestuffs need to be diversified for technological development activation in order to meet the increasing demands for natural dyeing. This study extracted dyeing solutions from the leaves of the Rose of Sharon (the national flower of South Korea) and investigated its dyeing properties for the development of various natural dyestuffs. This study investigates the dyeability of silk fabrics with Rose of Sharon leaves extract. Optimal conditions for dyeing of silk fabrics with the extract of Rose of Sharon were $40^{\circ}C/80min$ and $90^{\circ}C/60min$ with 100% concentration. Looking at the results, it showed the best K/S value at pH3, Sn pre-mordanting and Fe post-mordanting. Color fastness to washing, dry cleaning, rubbing and perspiration was good at grade 4-5 or 4. However, light fastness was observed in grade 2. In aspect of functional property, it showed an excellent result of 90% deodorization rate. In addition, its proven functionalities (deodorant properties) will help to produce high value added environment-friendly products. Those findings demonstrate the possibilities of the Rose of Sharon as an environment-friendly dye.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.3
• /
• pp.130-138
• /
• 2022

In this study, the characteristic of an amorphous fishing weight material according to controlling the alloy type and alloy composition of the glass forming agent added in PbO₂ oxide was investigated. According to the experimental, when the glass forming agent of 15wt%SiO₂-1wt%MgO content was added in β-PbO₂, an amorphous fishing weight substitute having the lowest friction coefficient, excellent corrosion resistance and durability was obtained. The cell number of PbO₂-15wt%SiO₂-1wt%MgO sample incubated in cell culture fluid tended to hardly decrease even after a lapse of 24 hours, It means that the fabricated PbO₂-15wt%SiO₂-1wt%MgO sample is significantly less-toxic and harmless to the human body, unlikely to metallic lead. It is considered that an fabricated amorphous fishing weight substitute proved to have a potential as an eco-friendly material with little marine pollution.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.320-330
• /
• 2017

People have recently became interested in eco-friendly cycling that attracted further attention as a sport activity. The number of high school cyclists has increased due to the popularity of cycling; however, high school cyclists have trouble choosing cycling suits because there is no professional cycling suit for high school cyclists in Korea. Therefore, it is necessary to develop a professional cycling suit for high school cyclists because sportswear for athletes is an important means to improve performance. This study suggests a standard sizing system for high school student athletes' cycle tights. The subjects were 111 high school cyclists. The 3 clusters were categorized by cluster analysis, and the sizing system was classified according to three lower body types. The size intervals of waist girth, hip girth and height were 5cm, respectively. The most frequent sizes were 75-100-175 in figure type 1, 70-90-170 and 75-95-170 in figure type 2, 70-90-175 and 70-90-180 in figure type 3. The sizing system, which had frequencies more than 3.6%, was classified into 9 cases, 8 cases, and 5 cases, respectively by lower body types. The results will contribute to the development of athletic performance cycle wear for high school cyclists.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.137-152
• /
• 2007

The purpose of this study is to research on concept, consisting factors, and specialties of theme park' character costumes to understand better about character costumes as well as to establish fundamental research data. The characteristics of character costumes in the theme park are as follows. First, theme park' character costumes are personified so that visitors may feel friendly and have emotional communication with them. Specially, costume that anthropomorphize an animal(85.3%) and silhouette of lozenge style(86.8%) dominated the highest weight. Animal figures are walking upright and wearing human's clothes. They communicate with visitors using mime actions. Second, various types of body proportion is applied to highlight the characteristics of character costume. Most character costumes are applied with unrealistic body proportion. This unrealistic body proportion give abnormal image and looks funny. The important factor is size of their head. Especially, 3.5 body proportion(78.9%) is general. Third, simplification, exaggeration, shrinkage, and modification are other factors. Simplification is applied differently by parts. Pocket, collar details are simplified to clarify the character's image. More simplification can lead to ommission. For their head, peculiar parts look stand out but other parts are simplified to stress their characteristics. Exaggeration is used with shrinkage to give strong impression to visitors. Forms are broken intentionally and they are modified. They look impressive because they are not harmonized. It is unexpected image and induces humor and familiar feelings. Matter of stylization includes exaggeration, shrinkage, modification and movement of actors that have tangible factor of character costume.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2007

In recent years, many robotics researches have been focused on developing human-friendly robots, that is, humanoid biped robots. The researches of humanoid robots include various areas such as hardware development, control of biped locomotion, artificial intelligence, human interaction, etc. The present work concerns the hardware development of a mid-size humanoid robot, BONOBO, focusing on rapid development of outer body parts with integrated application if CAD/CAM/CAE/RP. Most parts are three-dimensionally designed using 3D CAD, and effectively connected with CAE analyses using both kinematic simulation and structural analysis. In order to reduce lead time and investment cost for parts developments, Rapid Prototyping (RP) and CAM are selectively utilized for manufacturing body parts. These master parts are then replicated using the vacuum casting process, from which we can obtain plastic parts repeatedly. Through this integrated approach, the first prototype of BONOBO can be successfully developed with relatively low time and investment costs.