• Clinical and Experimental Pediatrics
• /
• 제61권7호
• /
• pp.226-230
• /
• 2018

Purpose: This pilot study assessed changes in the growth plate and growth rates in children during a 6-month period. Methods: The study included 31 healthy children (17 boys, 14 girls) under evaluation for growth retardation. Height, weight, bone age, insulin like growth factor-1 (IGF-1), and insulin like growth factor binding protein 3 (IGF-BP3) were measured at baseline and after 6 months. In addition, the diameter, thickness, and volume of the femoral and tibial growth plates were measured using magnetic resonance imaging. Results: The mean bone age in boys and girls was 11.7 and 10.7 years, respectively. In boys, height (z score) (-0.2 vs. 0.0), weight (z score) (0.8 vs. 1.1), body mass index (BMI) (z score) (1.27 vs. 1.5), IGF-1 (ng/mL) (343.6 vs. 501.8), and IGF-BP3 (ng/mL) (5,088.5 vs. 5,620.0) were significantly higher after 6 months. In girls, height (z score) (-1.0 vs. -0.7), weight (z score) (-0.5 vs. 0.1), BMI (z score) (-0.02 vs. 0.3), IGF-1 (ng/mL) (329.3 vs. 524.6), and IGF-BP3 (ng/mL) (4,644.4 vs. 5,593.6) were also significantly higher after 6 months. In both sexes, the mean diameter and volume of the femoral and tibial growth plates were significantly increased 6 months later. Conclusion: No significant correlation was found between changes in the growth plate and clinical parameters in children with growth retardation in this study, other than correlations of change in femoral diameter with weight and BMI. A larger, long-term study is needed to precisely evaluate the correlation between change in the growth plate and growth.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권12호
• /
• pp.1729-1735
• /
• 2011

The effect of flaxseed meal on broiler performance, carcass characteristics, alpha-linolenic acid contents, and organoleptic characteristics of chicken meat was studied during a 42 day experiment. Broiler chicks were randomly allotted to 4 experimental groups and fed iso-energetic and iso-nitrogenous diets containing flaxseed meal at 0, 5, 10 and 15%. Flaxseed meal did not affect the weekly body weight of broiler chicks during the first two weeks but thereafter weekly body weight reduced among flaxseed meal groups. At the end of $6^{th}$ week, birds fed on 15% flaxseed meal showed a reduction of 8% in body weight compared to the control group. Control group had significantly higher weight gain with slightly higher feed consumption and better feed conversion ratio (FCR), protein efficiency ratio (PER), and energy efficiency ratio (EER) than the flaxseed meal groups. Among the treatments, birds of 5 and 10% flaxseed meal groups had significantly better FCR, PER and EER compared to those of the 15% flaxseed meal group. The carcass characteristics data indicated a significant reduction in the eviscerated weight and breast yield at 15% flaxseed meal in the diet as compared to other dietary groups. However, the alpha-linolenic acid content in both breast and thigh meat was higher with an increasing level of flaxseed meal in the diets without affecting the sensory acceptability of meat. Based on the present study, up to 10% of flaxseed meal may be used in broiler diet to enhance the alpha-linolenic acid content in the broiler meat.

• International Journal of Korean Welding Society
• /
• 제5권1호
• /
• pp.53-59
• /
• 2005

Auto industry has employed resistance spot welding(RSW) to join steel sheets for structural rigidity of automobile body. Driven by the need to reduce weight and fuel consumption, car companies have been evaluating aluminum intensive vehicles(AIVs) as a way to reduce vehicle weight without downsizing. During the transition from all steel-construction vehicle body to aluminum intensive body, joining aluminum to steel sheets emerges as a serious contender in automobile body. This paper deals with application of transition material to RSW aluminum to steel. Placing transition material insert between the aluminum/steel interface was found very effective to overcome physical incompatibility between aluminum and steel. Use of transition insert allows for two separate weld nuggets to be formed in their respective aluminum/aluminum and steel/steel interfaces. This RSW processes was monitored with the aid of dynamic resistance sampling. Typical patterns in sampled dynamic resistance curves indicated formation of sound nugget. The growth of two separate nuggets was examined by micro-cross section test.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.239-239
• /
• 2000

Automobile manufacturers have employed resistance spot welding(RSW) to join steel sheets for structural rigidity o automobile body. Driven by the need to reduce weight and fuel consumption, car companies have been evaluating aluminum intensive vehicles(AIVs) as a way to reduce vehicle weight without downsizing. During the transition from all steel-construction vehicle body to aluminum intensive body, joining aluminum to steel sheets emerges as a serious contender in automobile body. This paper deals with application of transition material to RSW aluminum to steel. Placing transition material insert between the aluminum/steel interface was found very effective to overcome incompatibility between aluminum and steel. Use of transition insert allows for two separate weld muggets to be formed in their respective aluminum/ aluminum and steel/ steel interfaces. This RSW process was monitored with the aid of dynamic resistance sampling. Typical patterns in sampled dynamic resistance curves indicated formation of sound nugget. (Received February 28, 2000)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.112-118
• /
• 2000

Automobile manufacturers have employed resistance spot welding(RSW) to join steel sheets for structural rigidity of automobile body. Driven by the need to reduce weight and fuel consumption, car companies have been evaluating aluminum intensive vehicles(AIVs) as a way to reduce vehicle weight without downsizing. During the transition from all steel-construction vehicle body to aluminum intensive body, joining aluminum to steel sheets emerges as a serious contender in automobile body. This paper deals with application of transition material to RSW aluminum to steel. Placing transition material insert between the aluminum/steel interface was found very effective to overcome incompatibility between aluminum and steel. Use of transition insert allows for two separate weld nuggets to be formal in their respective aluminum/aluminum and steel/steel interfaces. This RSW process was monitored with the aid of dynamic resistance sampling. Typical patterns in sampled dynamic resistance curves indicated formation of sound nugget.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권6호
• /
• pp.794-798
• /
• 2004

An attempt was made to improve the efficiency of growth and lactation performance of dairy heifers subjected to a stair-step growth scheme using rice straw as the sole roughage source. Twenty-four young Holstein heifers were randomly assigned to either control or test group. The control diet met the National Research Council (NRC) requirement, with heifers calving at 24 to 26 mo of age. The test group was individually fed according to a schedule of 3, 2, 4, 2, 5 and 2 mo in which feed intake was alternately 20% below or 25% above the NRC requirements. Heifers on the stair-step growth pattern gained more body weight and consumed less dry matter (10.80 and 11.22%, respectively), resulting an increasing growth efficiency compared with the control. Body condition, first estrus, first conception, services per conception and calving difficulty (data not shown) were not affected. Milk yield of the test group was 8.5% higher than that of the control group. During the early lactation period, the milk yield was significantly higher in the stair-step group than in that of the control group (p<0.05). Milk composition was not affected by compensatory growth induced by the stair-step scheme. Also, weight at calving and calf growth performance was not affected by stair-step growth. The results indicate that using rice straw as a sole roughage source in a stair-step compensatory growth scheme can contribute to the improvement of growth efficiency and early lactation performance.

• 한국수산과학회지
• /
• 제49권3호
• /
• pp.317-322
• /
• 2016

This study was carried out to investigate the effects of various dietary lipid sources on the growth performance, body composition, and fatty acid profiles of juvenile fancy carp (Cyprinus carpio var. koi). Three replicate groups of fish (initial mean body weight, 15.1±0.18 g) were fed one of five experimental diets containing fish oil (SLO), soybean oil (SO), linseed oil (LO), lard (LA), or a mixture of SLO, SO, and LO (Mix) for 8 weeks. Fish fed the LA diet gained less weight than did fish fed the LO diet. The feed efficiency and protein efficiency ratio of fish fed the LA and Mix diets were lower than those of fish fed the SO and LO diets. The body lipid content of fish fed the SO diet was lower than those of the other groups. Whole-body fatty acid compositions reflected the fatty acid compositions of dietary lipid sources. Fish fed the SO diet had high concentrations of linoleic acid and arachidonic acid, whereas fish fed the LO diet were rich in linolenic acid. Fish fed the SLO diet had significantly higher levels of eicosapentaenoic acid and docosahexaenoic acid compared with fish fed the SO, LO, and LA diets. The results of this study suggest that SO or LO could be used as a replacement for SLO in the diets of juvenile fancy carp without any negative effects on growth and feed utilization when the dietary essential fatty acid requirements are satisfied for juvenile fancy carp.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제9권1호
• /
• pp.111-115
• /
• 2004

Nutrition plays an important role in maintaining the larval health, cocoon quality and reproductive potential in Antheraea mylitta D. Nutritional efficiency greatly influenced if food is not adequate and of quality. A. mylitta silkworms were subjected to food deprivation for the period of 0 hr to 12 hrs /day to assess its effect on various nutritional parameters and indices, and its manifestation at different levels. Food ingesta, digesta, gain in body weight declined significantly at each level of deprivation, so also food utilization efficiency like consumption index (CI), growth rate (GR), approximate digestibility (AD), and efficiency of conversion of ingested food (ECI). This stress leads to decline in mean daily food ingesta by 16.73% to 39.76% and digesta by 28.98% to 54.01 % following a significant reduction in average daily body weight gain (27.68% to 55.09%). Food deprivation a1so caused significant loss in the silk gland weight, cocoon and shell weight (14.37% to 53.69%), lowered the fecundity (35.86 % to 83.59%) and in number of eggs laid per gram body weight, but simultaneously the number of non-chorionated eggs increased significantly.

• 한국어류학회지
• /
• 제18권1호
• /
• pp.45-54
• /
• 2006

본 연구는 우리나라 주요 어종 중의 하나인 참조기의 이석을 이용하여 최근 어획되는 참조기의 연령과 성장을 추정하였다. 연구에 사용된 참조기의 이석은 제주도 근해에서 쌍끌이기선저인망어업에 의해 어획된 것으로 2002년 3월부터 12월 자료와 2005년 1, 2월 자료이다. 사용된 개체수는 1,175미였고, 연령사정에 이용된 개체수는 506미였다. 체장의 범위는 16.3~26.9 cm였으며, 연령은 수컷이 7세, 암컷이 8세까지 나타났다. 참조기의 전중 (Body Weight)와 체장 (Total Length)의 관계는 $BW=0.0044TL^{3.2502}$ ($R^2=0.97$)이었고, 암 수별로 체장에 대한 전중의 차이가 있었다(P<0.05). 참조기의 연령에 대한 체장 자료의 오차구조를 확인한 결과 합의 오차구조를 가지고 있었으며, 참조기의 성장식은 von Bertalanffy model을 사용하여 추정하였다. 비직선회귀 (non-linear regression) 방법을 이용하여 추정한 참조기의 성장식은 TL=33.88 ($1-e^{-0.20\;(t+2.39)}$ ($R^2=0.77$)이었다. 암 수간의 연령에 대한 체장의 상대성장에는 차이가 없는 것으로 나타났다(P>0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권3호
• /
• pp.410-415
• /
• 2009

The weekly liveweight gain, growing and stress parameters of quails bred using two different types of lighting for 6 weeks following hatching were examined in this study. The first type of lighting was 23 L:1 D, continuous lighting (CL), widely used in the commercial system and the second was a self-photoperiod (SP) system consisting of a continuously lit chamber and a dark chamber the quails could move to as they wished. On the first 15 days, no difference was found in liveweight gain between the two breeding systems. On the $6^{th}$ week when the trial was completed, the liveweight of the male quails upon which CL lighting was used was 159.03 g while the weight of males in the SP group was 174.43 g; these values in female quails of the CL group were 179.15 g and in the SP group were 200.68 g. The CL group had lower testis volume (TVOM, $cm^{3}$) and testis weight (TW, g) than the SP group, however there was no difference between the groups in testis weight/body weight rate (BWTW %). In female quails, the ovary weight (OW, g) and the ovary weight/body weight rate (BWOW, %) values were higher in the SP group. The CL light regime was concluded to cause stress in male quails (CL, Heterophil/Lymphocyte ratio (H/L): 0.27; SP, H/L: 0.17). In conclusion; the SP system allowing the quails to regulate their light periods increased liveweight gain and enabled sexual maturity to be gained at an earlier period than in quail on the CL system and improved their welfare.