• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1104-1105
• /
• 2006

Several boride sintered bodies such as $TiB_2$, $ZrB_2$, and $SiB_6$ were previously reported. In the present study, the sinterability and physical properties of chromium boride $(CrB_2)$ containing chromium carbide $(Cr_3C_2)$ sintered bodies were investigated in order to determine its new advanced material. The samples were sintered at desired temperature for 1 hour in vacuum under a pressure by hot pressing. The relative density of sintered bodies was measured by Archimedes' method. The relative densities of $CrB_2$ addition of 0, 5, 10, 15 and 20 mass% $Cr_3C_2$ composites were 92 to 95%. The Vickers hardness of the $CrB_2$ with 10 and 15 mass% $Cr_3C_2$ composites were about 14 and 15 GPa at room temperature, respectively. The Vickers hardness at high temperature of the $CrB_2$ addition of 10 mass% $Cr_3C_2$ composite decreased with increasing measurement temperature. The Vickers hardness at 1273 K of the sample was 6 GPa. The Vickers hardness of $CrB_2$ addition of $Cr_3C_2$ composites was higher than monolithic $CrB_2$ sintered body. The powder X-ray diffraction analysis detected CrB and $B_4C$ phases in $CrB_2$ containing $Cr_3C_2$ composites.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.701-705
• /
• 2012

The effects of clay, aluminum hydroxide, and carbon powder on the sintering of a Si/SiC mixture from photovoltaic silicon-wafer production were investigated. Sintering temperature was fixed at $1,350^{\circ}C$ and the sintered bodies were characterized by SEM and XRD to analyze the microstructure and to measure the apparent porosity, absorptivity, and apparent density. The XRD peak intensity of SiC in the sintered body was increased by adding 5% carbon to the Si/SiC mixture. From this result, it is confirmed that Si in the Si/SiC mixture had reacted with the added carbon. Addition of aluminum hydroxide decreased the cristobalite phase and increased the stable mullite phase. The measurement of the physical properties indicates that adding carbon to the Si/SiC mixture enables us to obtain a dense sintered body that has high apparent density and low absorptivity. The sintered body produced from the Si/SiC mixture with aluminum hydroxide and carbon powder as sintering additives can be applied to diesel particulate filters or to heat storage materials, etc., since it possesses high thermal conductivity, and anticorrosion and antioxidation properties.

• 한국재료학회지
• /
• 제33권6호
• /
• pp.242-250
• /
• 2023

Titanium, which has excellent strength and toughness characteristics, is increasingly used in the aerospace field. Among the titanium alloys used for body parts, more than 80 % are Ti-6Al-4V alloys with a tensile strength of 931 MPa. The spark plasma sintering (SPS) method is used for solidification molding of powder manufactured by the mechanical milling (MM) method, by sintering at low temperature for a short time. This sintering method avoids coarsening of the fine crystal grains or dispersed particles of the MM powder. To improve the mechanical properties of pure titanium without adding alloying elements, stearic acid was added to pure titanium powder as a process control agent (PCA), and MM treatment was performed. The properties of the MM powder and SPS material produced by solidifying the powder were investigated by hardness measurement, X-ray diffraction, density measurement and structure observation. The processing deformation of the pure titanium powder depends on the amount of stearic acid added and the MM treatment time. TiN was also generated in powder treated by MM 8 h with 0.50 g of added stearic acid, and the hardness of the powder was higher than that of Ti-6Al-4V alloy when treated with MM for 8 h. When the MM-treated powder was solidified in the SPS equipment, TiC was formed by the solid phase reaction. The SPS material prepared as a powder treated with MM 8 h by adding 0.50 g of stearic acid also formed TiN and exhibited the highest hardness of Hv1253.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.224-231
• /
• 2016

The usefulness of Gel Bolus phantom was investigated by comparing the temperature distribution characteristic of the agar phantom produced to investigate the dose distribution characteristic of radiofrequency hyperthermia device with that of the Gel Bolus phantom under conditions similar to those of an agar phantom that can continuously carry out temperature measurement. The temperatures of the agar phantom and the Gel Bolus phantom were raised to $36.5{\pm}3^{\circ}C$ and a temperature sensing was inserted at depths of 5, 10, and 15 cm from the phantom central axis. The temperature increase rate and the coefficient of determination were analyzed while applying output powers of 100 W and 150 W, respectively, at intervals of 1 min for 60 min under conditions where the indoor temperature was in the range $24.5{\sim}27.5^{\circ}C$, humidity was 35~40%, internal cooling temperature of the electrode was $20^{\circ}C$, size of the upper electrode was 250 mm, and the size of the lower electrode was 250 mm. The coefficients of determination of 150 W output power at the depth point of 5 cm from the central axis of the phantom were analyzed to be 0.9946 and 0.9926 in the agar and Gel Bolus phantoms, respectively; moreover, the temperature change equation of the agar and Gel Bolus phantoms with time can be expressed as follows in the state the phantom temperature is raised to $36^{\circ}C:Y(G)$ is equation of Gel Bolus phantoms (in 5 cm depth) applying output power of 150 W. Y(G)=0.157X+36. It can be seen that if the temperature is measured in this case, the Gel Bolus phantom value can be converted to the measured value of the agar phantom. As a result of comparing the temperature distribution characteristics of the agar phantom of a human-body-equivalent material with those of the Gel Bolus phantom that can be continuously used, the usefulness of Gel Bolus phantom was exhibited.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1478-1485
• /
• 2007

본 논문에서는 풍향 풍속 계측모듈 및 DSP 센서인터페이스 회로 보드를 포함하는 기상계측 시스템을 제안한다. 이 DSP 시스템은 풍향풍속모듈, 대기압센서, 대기 온도 센서의 정보를 받아들이고, 빠르게 처리하여 PC 모니터링 시스템에 전달한다. 특히 풍향 풍속 모듈과 DSP 하드웨어는 직접 설계하여 적용한다. 풍향 풍속 모듈은 바람에 관한 벡터적 정보를 얻기 위해 4개의 박막형 RTD(Resistive Temperature Detectors) 저항센서를 히팅 코일에 의해 일정하게 가열된 원기둥 모양의 지지 표면에 벡터적으로 배치하는 구조를 채택한다. 이 구조를 채택한 계측 모듈은 진동, 습기, 부식 등에 강인하면서 정확한 계측을 가능케 한다. 센서 신호처리 회로는 TI사의 고속 DSP인 TMS320F2812 사용한다. 적용된 풍향 풍속 모듈을 통해 얻어진 데이터와 DSP 인터페이스 회로보드의 빠른 데이터 처리를 통해 저렴한 기상계측시스템을 구성 할 수 있었다.

• 한국산업정보학회논문지
• /
• 제14권5호
• /
• pp.125-130
• /
• 2009

현대 사회에서 거동이 불편한 장애인이나 독거노인들은 지속적인 관심과 사회적인 책임이 요구 되고 있으나 현실적으로 어려움이 많다. 본 논문에서는 장애인이나 노약자의 건강상태 (온도 및 맥박수)를 측정하고 비상상황이 발생할 경우 가족, 병원의 담당의사에게 휴대전화를 통하여 통보하며 측정된 데이터를 DB화하는 건강관리 시스템을 구현하였다. 본 시스템은 조도센서와 고휘도 LED를 이용하여 손가락의 혈류를 감지를 통해 맥박수와 비접촉식 은도센서를 이용하여 원하는 물체의 온도를 동시에 측정하는 방식을 구현하여 LCD에서 확인이 가능하도록 개발하였다. 또한 측정값을 지그비 통신을 이용하여 사용자가 서버컴퓨터로 측정값을 전송하여 측정된 간을 관측하고 DB화하여 측정된 값, 평균, 측정된 시간을 주기적으로 저장할 수 있도록 하였다. 몸에 이상이 있을 경우 보호자, 의사 및 119구급대에 문자를 전송하여 위급 상황을 대처할 수 있도록 구현하였다.

• 동의신경정신과학회지
• /
• 제20권2호
• /
• pp.85-99
• /
• 2009

Objectives : This study aimed to understand the influence of acupuncture on the human body by comparing changes within human bodies before and after people in normal health are treated with acupuncture at the acupoints HT7 and PC9, which are related to mental functions. Methods : The study was performed from January 3, 2008 to March 5, 2008 on 60 healthy males and females in their 20s. HRV, EEG, skin conductance response, respiration and peripheral skin temperature were measured for 5 minutes before acupuncture simulation was applied to the acupoints HT7 and PC9. During 20 minutes of acupuncture treatment, the same items were continuously measured to determine whether there had been any changes, and they were then measured for 5 minutes after the removal of the acupuncture needles in order to implement a comparative analysis. Results : 1. The HRV measurement showed that in the course of before, during and after acupuncture stimulation, heart rate, HF and HF norm decreased significantly (P<0.05) at HT7. LF, LF norm, and LF/HF ratio increased significantly (P>0.05), while heart rate, HF and HF norm decreased significantly (P<0.05) at PC9. 2. Skin conductance response increased significantly (P<0.05) at PC9 during and after the acupuncture simulation periods, compared with the pre acupuncture period. 3. the peripheral skin temperature increased significantly (P<0.05) both at HT7 and PC9 in the course of before, during and after acupuncture stimulation. 4. Compared with the pre-acupuncture period, respiration rate increased both at HT7 and at PC9 during and after the acupuncture simulation periods, but not in a statistically significance. 5. In the EEG measurement, when compared with the pre-acupuncture period at HT7, mid ${\beta}$ wave decreased significantly (P<0.05) during acupuncture treatment. Compared with the measurements during acupuncture treatment at PC9, low ${\beta}$ wave increased significantly (P<0.05) after the acupuncture needles were removed. Conclusions : When acupuncture treatment is applied at the acupoints HT7 and PC9, the activation of parasympathetic nerves decreases and the activation of sympathetic nerves increases in the HRV measurement. It was determined that PC9 makes the sympathetic nerves become highly activated in a skin conduction response. The effect of stability in the brain wave seemed to bo shown at HT7 than PC9.

• 한국콘텐츠학회논문지
• /
• 제21권4호
• /
• pp.60-66
• /
• 2021

우리 주변에는 다양한 곤충들이 서식하고 있다. 요즘 가정에서 취미로 곤충을 키우거나, 약용 곤충을 산업적 이용을 위해 대량으로 사육하고 있기도 하다. 그리고 곤충들의 다양한 생육 특성을 이해하기 위한 다양한 연구들이 수행되어 왔다. 주로 실험실에서 환경요인을 변화시켜 생육 특성만의 변화를 실험한 연구들이다. 그러나 곤충의 경우에는 피부온도나 체온을 측정하는 것은 쉽지 않다. 특히, 날개를 가진 곤충들의 체온 혹은 피부온도에 대한 실험 결과가 매우 부족하다. 본 연구에서는 자연상태로 서식하고 있는 벌(꿀벌)과 나비(남방부전 나비)에 대하여 정지시와 비행시 등의 생체활동 조건에서 곤충들의 피부 온도를 비접촉식 온도 측정 방법인 열화상카메라를 이용하여 촬영 측정하였다. 실험으로 얻어진 결과를 정량적인 분석을 통하여 곤충별 피부온도와 생체 활동 특성의 관계를 규명하였다. 꿀벌은 비행, 꿀 채취, 그리고 자리 이동이라는 세 가지 중요 활동별로 다른 피부온도를 유지하고 있음을, 나비는 나방의 특성과 유사하게 비행을 위한 워밍업 단계를 실행함을 확인하였다.

• 환경영향평가
• /
• 제22권3호
• /
• pp.241-254
• /
• 2013

The nutria(Myocastor coypus) that is originated from South America is a representative Invasive alien species in Korea. invasive alien species is one of the biggest causes for the loss of biodiversity and it may threaten the conservation and function of ecology as well as the welfare of mankind. Intense habitation has been made around the Nakdong River basin area that this study has analyzed the habitat density of nutria for the subject of 3 survey sites in the Nakdong River basin area. As a result of survey on habitation density in 2011 and 2012, under St.1 it was shown $2.01{\pm}0.21$/ha in 2011 and $0.69{\pm}0.55$/ha in 2012. Under St.2, it was shown $0.91{\pm}0.37$/ha in 2011 and $0.55{\pm}0.39$/ha in 2012. Under St.3, it was shown $5.31{\pm}0.72$/ha in 2011 and $3.99{\pm}2.31$/ha in 2012. The wet survey areas of St.1 and St.3 had shown relatively high habitation density compared to St. 2, the river survey area, and the average annual habitation density of the survey area was $2.74{\pm}2.29$/ha in 2011 and $1.74{\pm}1.18$/ha in 2012 that it has shown slightly reducing trend. As a result of measuring the morphology by capturing the habitation individuals, the average body length of adults is $92.23{\pm}9.41cm$, the length from the head to body for $53.90{\pm}5.15cm$, tail length for $38.33{\pm}4.83cm$, hind foot length for $13.82{\pm}1.00cm$, front foot length for $6.02{\pm}0.56cm$, and weight for $5.48{\pm}1.08kg$. As a result of comparing the types between genders, male showed a slightly higher figure in all parts compared to female and it showed significantly difference in total body length, head-body length, front foot length and total weight. As a result of analysis for each head-body length, other measured parts, weight and relativity for each measured part, all bodily part is shown to have the higher volume of correlations. The condition index of individuals in the survey area was shown in the average of $35.67{\pm}4.78$ with female for an average of $36.60{\pm}5.19$ and male for an average of $34.73{\pm}4.34$. The winter temperature in the southern area of Korea is considered for not greatly impacting on the habitation and development of nutria that, if there is no artificial control, it is considered to have certain concern of showing drastic breeding and territory expansion for the habitation group.