• 환경생물
• /
• 제35권1호
• /
• pp.64-82
• /
• 2017

Two species of the minuta-subgroup within the oncaeid copepod genus Triconia $B{\ddot{o}}ttger$-Schnack, 1999 collected in the equatorial Pacific Ocean are newly recorded. A female T. minuta (Giesbrecht, 1893 ["1892"]) and both male and female T. umerus ($B{\ddot{o}}ttger$-Schnack and Boxshall, 1990) from the northeast equatorial Pacific are redescribed with the comparison of its morphological details, which differs from previous studies, in terms of the larger body size, the length to width ratio of the genital double-somite, the relative length of the outer basal seta on P5, and the ornamentation of the appendages. The characters, which are used for identification, such as the length ratio of the outer subdistal and outer spine versus the distal spine on P3-P4, and the outer spine length of the middle exopodal segment on P3 and P4 are reported for the first time. Information on the variations in the endopodal spine lengths of swimming legs 2-4 is also provided for T. minuta and T. umerus, with the summary of the wide zoogeographical distribution of these two species.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.1-7
• /
• 2006

The Primary type of swinging motion in human movement is that which is characteristic of a pendulum. The two types of pendulums are identified as simple and compound. A simple pendulum consist of a small body suspended by a relatively long cord. Its total mass is contained within the bob. The cord is not considered to have mass. A compound pendulum, on the other hand, is any pendulum such as the human body swinging by hands from a horizontal bar. Therefore a compound pendulum depicts important motions that are harmonic, periodic, and oscillatory. In this paper one discusses and compares two algorithms of Newton's method(F = m a) and Euler's method (M = $I{\times}{\alpha}$) in compound pendulum. Through exercise model such as human body with weight(m = 50 kg), body length(L = 1.5m), and center of gravity ($L_c$ = 0.4119L) from proximal end swinging by hands from a horizontal bar, one finds kinematic variables(angle displacement / velocity / acceleration), and simulates kinematic variables by changing body lengths and body mass. BSP by Clauser et al.(1969) & Chandler et al.(1975) is used to find moment of inertia of the compound pendulum. The radius of gyration about center of gravity (CoG) is $k_c\;=\;K_c{\times}L$ (단, k= radius of gyration, K= radius of gyration /segment length), and then moment of inertia about center of gravity(CoG) becomes $I_c\;=\;m\;k_c^2$. Finally, moment of inertia about Z-axis by parallel theorem becomes $I_o\;=\;I_c\;+\;m\;k^2$. The two-order ordinary differential equations of models are solved by ND function of numeric analysis method in Mathematica5.1. The results are as follows; First, The complexity of Newton's method is much more complex than that of Euler's method Second, one could be find kinematic variables according to changing body lengths(L = 1.3 / 1.7 m) and periods are increased by body length increment(L = 1.3 / 1.5 / 1.7 m). Third, one could be find that periods are not changing by means of changing mass(m = 50 / 55 / 60 kg). Conclusively, one is intended to meditate the possibility of applying a compound pendulum to sports(balling, golf, gymnastics and so on) necessary swinging motions. Further improvements to the study could be to apply Euler's method to real motions and one would be able to develop the simulator.

• Animal Systematics, Evolution and Diversity
• /
• 제31권1호
• /
• pp.31-41
• /
• 2015

A new species of the genus Farranula Wilson, 1942 (Cyclopoida, Corycaeidae) is described based on both sexes collected off Chuuk Island in Micronesia (West Central Pacific). The new species F. dahlae differs from its close congener F. gibbula (Giesbrecht, 1891) in the following combination of characters in both sexes: body length is longer, length to width ratio of caudal rami is larger, basal element of maxilliped is distinctly longer, and terminal spine to distal segment ratio of P4 is smaller; while in females, lateral margins of fourth pedigerous somite are extended to mid-region of second urosomal somite, maximum width of the second urosomal somite is located at middle region in dorsal and lateral views, and length ratio of caudal seta III to seta V is much larger; and in males, sharply contracted portion of second somite is located at two-thirds distance from anterior margin. Some additional morphological details of F. gibbula are given and a key to species of the genus Farranula is provided.

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.47-58
• /
• 2002

This research suggested the mathematical model (forward kinematics method) to provide the reference points of driver space more easily and accurately in designing the package layout of vehicle interiors. For this purpose, the lengths of body segments of drivers and various joint angles occurred while were used. The length data between joints for the mathematical model were extracted from $SAFEWORK^{\circed{R}}$ as well as 95th percentile male and 5th percentile female body dimensions were utilized. In addition, the angles of body segments were applied on its diverse values within proper ranges in order to compare them each other. the mathematical model in this study was based on the concept of converting polar coordinate system to Cartesian coordinate system so that reference points of driver space were acquired in Cartesian coordinate system after using the segment lengths of drivers and the joint angles of driving postures as an input of polar coordinate system. It is expected that reference points of driver space obtained from this research are helpful to the study on package layout that is appropriate for physical characteristics of drivers.

• 한국의류학회지
• /
• 제35권9호
• /
• pp.1049-1059
• /
• 2011

This study investigates the current state of companies that manufacture and sell outdoor wear. A survey was conducted to identify what problems they had and what aspects they needed to supplement through a comparison and analysis of their block patterns. Companies that manufactured outdoor wear and those that sold them were separately surveyed to understand their current state. The manufactures included 4 companies and 14 sellers. The survey used interviews to cover the areas of target consumers, development patterns, production lines, body size, nominal size, production size, and functional materials for each item, and aspects that need improvement. The survey period was from September $3^{rd}$ to $10^{th}$ 2008. There were three block patterns for jackets, T-shirts, and pants. The investigator collected the patterns used by three outdoor clothing manu-facturers for comparison and assessment. As a result, the mean age of the target consumers set by the outdoor clothing manufacturers and sellers was 25.3-50.7 and 29.2-42.5, respectively, which shows that the outdoor clothing had a wider distribution of target consumers than the sellers. It is imperative for them to segment and differentiate the target consumers and concepts. The basic body measurements the companies used to draw the upper and lower garment patterns were the bust circumference for the upper garment patterns and the waist circumference for the lower garment patterns. The basic nominal size was 95 for the upper garment and 70 for the lower garment. Also analyzed were the block patterns according to the items to understand the pattern characteristics of each of the companies. There were a total of 35, 36, and 30 items for the jackets, T-shirts, and pants, respectively, to measure size. The items were then compared with one another in mean and standard deviation. The analysis indicate that the block patterns were not fit for women in their twenties or thirties to wear and required revisions in the length of the upper garment, the height of sleeve cap, bust circumference, hip length, and pant length.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.439-446
• /
• 2021

Purpose: The aim of this study was to identify correlations between the STOP-Bang score and upper airway dimensions using cone-beam computed tomography (CBCT) scans. Materials and Methods: This study included 101 subjects (46 men, 55 women) from dental patients who received CBCT scans from 2014 to 2020. The patients were divided into those with a low obstructive sleep apnoea (OSA) risk (STOP-Bang score<3) and those with an intermediate to high OSA risk (STOP-Bang score≥3), and their upper airway dimensions were then analysed on CBCT scans. Comparisons between the low-risk and intermediate/high-risk groups were conducted using the t-test and the Mann-Whitney test. Correlations between the total STOP-Bang score and upper airway dimension parameters were established using Spearman correlation coefficients. P values≤0.05 were considered to indicate statistical significance. Results: Intermediate/high-risk subjects were predominantly male and over 50 years of age, with a higher body mass index. They had significantly longer upper airways, smaller average airway volumes, and smaller widths and antero-posterior dimensions of the narrowest upper airway segment. The total upper airway length was positively correlated with the STOP-Bang score (r_s=0.278). The average volume (r_s= -0.203) and width of the narrowest upper airway segment(r_s= -0.305) were both negatively correlated with STOP-Bang scores. Conclusion: Subjects with higher STOP-Bang scores had upper airways that were longer, narrower, and smaller in terms of average volume. CBCT scans taken for dental patients as part of investigative procedures could be correlated with STOP-Bang scores to screen for patients at risk of OSA.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.9-13
• /
• 1998

한국산 도룡농 Hynobius leechi의 시각계발생을 형태학적으로 연구하였다. 수정란을 채집하여 멸균된 생리식염수에서 발생시키고 5-30mm길이의 유생을 크기별로 하였다. 표본은 paraffin에 포매하고 절편하여 광학현미경하에서 관찰하였다. 5mm유생에서, 안배에 의해 유도된 수정체의 원기는 감각외 배엽과 결함되어 있었다. 12mm유생은 수정체가 구형으로 되고 색소상피가 뚜렷해지나 망막층의 분화는 일어나지 않았다. 14-16mm유생은 망막층의 분화가 뚜렷해지며 수정체의 중심부섬유의 핵이 붕괴되었다. 20mm유생의 안배의 외연부는 얇아져서 홍채와 모양체를 형성하였다. 30mm유생에서는 맥락막이 두터워지고 연골이 안구의 외곽에서도 나타났다. 광수용세포층의 외절은 점차로 길게 성장하고 안구신경은 연골을 지나 뇌의 복측에 연결된다.

• 한국운동역학회지
• /
• 제29권3호
• /
• pp.173-183
• /
• 2019

Objective: The aim of this study was to investigate the correlation coefficients between anthropometric parameters of the foot and kinetic variables during running. Method: This study was conducted on 21 healthy young adults (age: $24.8{\pm}2.1yes$, height: $177.2{\pm}5.8cm$, body mass: $73.3{\pm}7.3kg$, foot length: $256.5{\pm}12.3mm$) with normal foot type and heel strike running. To measure the anthropometric parameters, radiographs were taken on the frontal and sagittal planes, and determined the length and width of each segment and the navicular height. Barefoot running was performed at a preferred velocity ($3.0{\pm}0.2m/s$) and a fixed velocity (4.0 m/s) on treadmill (Bertec, USA) in order to measure the kinetic variables. The vertical impact peak force, the vertical active peak force, the braking peak force, the propulsion peak force, the vertical force at mid-stance (vertical ground reaction when the foot is fully landed in mid-stance or at the point where the weight was uniformly distributed on the foot) and the impact loading rate were calculated. Pearson's correlation coefficient was used to investigate the relationship between anthropometric variables and kinetical variables. The significance level was set to ${\alpha}=.05$. Results: At the preferred velocity running, the runner with longer forefoot had lower active force (r=-.448, p=.041) than the runner with short forefoot. At the fixed velocity, as the navicular height increases, the vertical force at full landing moment increases (r= .671, p= .001) and as the rearfoot length increases, the impact loading rate decreases (r=- .469, p= .032). Conclusion: There was a statistically significant difference in the length of fore-foot and rearfoot, and navicular height. Therefore it was conclude that anthropometric properties need to be considered in the foot study. It was expected that the relationship between anthropometric parameters and kinetical variables of foot during running can be used as scientific criteria and data in various fields including performance, injury and equipment development.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.15-33
• /
• 2004

A precise understanding of the human form in static pose serves as the basis of designing clothing. When the human body is in motion, however, even an article of clothing designed to fit the human form in static pose can pull and change, thus restricting the body. In order to increase the fit of the clothing, which may be termed the second skin, its form and measurements therefore must be determined in correlation not only with the formal characteristics of the human body, in static pose but also with its functional characteristics in motion, as caused by the movements of the human body. In this study, the motion factor was selected as the primary basis for designing slacks with good fit in both static and moving states. By indentifying the areas in which lower limb movement cause significant changes in body surface lines, we suggest several application methods for designing slacks. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Body parts whose measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. The results of this study are as follows. First, changes in body surface lines caused by lower limb movements were significant in all body surface lines of the lower trunk, both horizontal and vertical, with the exception of abdomen girth, midway thigh girth, ankle girth, hip length, and posterior knee girth. Second, significantly expanded 10 body surface lines in moving pose were detected and illustrated in table 4. These body parts should be studied in designing or pattern designing, especially for close-fitting pants, in using stretch fabric, and in sensory evaluation of good fit during movement.

• Applied Microscopy
• /
• 제30권1호
• /
• pp.1-9
• /
• 2000

배회성거미인 별늑대거미의 4쌍의 단안은 앞이마 부분 1열에 전중안, 전측안, 2열에 후중안, 그리고 두흉부의 3열에는 후측안이 각각 1쌍씩 위치하고 있었다. 전중안의 망막을 구성하는 시세포는 두 재의 신경돌기를 가진 전형적인 이극성 신경세포였으며, 나머지 단안인 전측안, 후중안, 후측안은 단극성 신경세포임이 확인되었다. 후중만과 후측안의 감간은 시세포 원형질막의 일부가 미세융모로 변형된 감간체로 되어 있었으며, 망막을 구성하는 시세포들은 하나의 감간 주위에 규칙적으로 색소세포 돌기가 분포하고 있었으나, 전중안과 전측안의 망막내에는 불규칙적으로 시세포와 색소세포들이 분포하고 있었다. 반사층은 시세포의 감간과 intermediate segment사이에서 위치라는 불연속적인 구조이며, 주안인 전중안을 제외한 나머지 눈에서 관찰되었다. 전중안과 전측안이 그리고 후중안과 후측안의 크기가 각각 비슷하였으며, 단안을 구성하는 각 구성물의 크기는 각막이 4쌍의 눈에서 모두 비슷하였고, 렌즈, 세포체, 감간은 전중안과 전측안, 후중안과 후측안이 각각 비슷하였으며, 초자체는 후중안이 가장 크고 이어서, 후측안, 전중안, 전측안의 순으로 관찰되었다.