The object of the present study is to examine the effect of physical training during early growth of life on body weight gain and physical performance. Early weaned (2 weeks after birth) male mice were divided into control and training group-and experimental period was divided into growing period (from 1st week to 6th weeks after weaning) and adult period (from 7th weeks to 9th weeks after weaning). Physical training was. given on a small animal treadmill with a speed of 34.3m/min and $19^{\circ}C$ slope and both groups of body weight gain and maximal running time on the treadmill were determined. The results obtained are summarized as follows; 1. Body weight gain was lesser in training group than control group and the difference was. statistically significant at 1, 2.5, 5.7 weeks of training period. 2. Maximal running time of training group was found to be longer than that of control group at 6th (p<0.01), 8th (p<0.001) and 9th weeks. (p<0.01). From the above results, it may be concluded that if physical training is started in early growth of life, there might be an improvement of physical performance.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.25
no.6
/
pp.108-114
/
2011
In order to mitigate the possible hazards from electric shock due to the touch and step voltages, the high resistivity material such as gravel is often spread on the earth's surface in substations. When the grounding electrode is installed in two-layer soil structures, the surface layer soil resistivity is different with the resistivity of the soil contacted with the grounding electrodes. The design of large-sized grounding systems is fundamentally based on assuring safety from dangerous voltages within a grounding grid area. The performance of the grounding system is evaluated by tolerable touch and step voltages. Since the floor surface conditions near equipment to be grounded are changed after a grounding system has been constructed, it may be difficult to determine the tolerable touch and step voltage criteria. In this paper, to propose an accurate and convenient method for evaluating the protective performance of grounding systems, the propriety of the method for evaluating the current flowing through the human body around on a counterpoise buried in two-layer soils is presented. As a result, it is reasonable that the grounding system performance would be evaluated by measuring and analyzing the current flowing through the human body based on dangerous voltages such as the touch or step voltages and the contact resistance between the ground surface and feet.
A total of twenty-four multiparous sows (Landrace × Yorkshire) and their litters were used in this 21-day experimental trial. Based on their body weight, sows were randomly allocated into one of three treatments with eight replicates. The dietary betaine supplementation contained three levels: (i) CON (Basal diet + 0% Bet), (ii) Bet 0.05% (CON + 0.05% Betaine), and (iii) Bet 0.15% (CON + 0.15% Betaine). The supplementation of betaine had no effect (p > 0.05) on body weight and feed intake of lactating sow. Moreover, no significant response was observed on backfat thickness, body condition score, and weaning of the estrus interval with the dietary supplementation of betaine. In addition, the litter weaning weight, litter weight gain, average litter daily gain, and survivability rate at birth showed no significant difference with the dietary betaine supplementation of the sow diet. Fecal scores of the lactating sows and suckling piglets were not affected (p > 0.05) with the dietary betaine supplementation compared with the control diet during the experimental periods. The findings of this study showed that betaine supplementation does not boost growth performance, feed intake, body conditions, and fecal score in lactating sows and suckling piglets fed a corn-soybean meal-based diet.
Transactions of the Korean Society of Pressure Vessels and Piping
/
v.17
no.2
/
pp.75-82
/
2021
The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm2 was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.
This study compared the effect of four different feeding methods for gestating gilts on reproductive performance and growth of their progeny. A total of 40 F1 primiparous sows (Yorkshire${\times}$Landrace) were allotted to four treatments in a completely randomized design (CRD). For treatments, gestating period of sows was divided into three trimesters (0-35 d, 36-90 d and 91-110 d) and different amounts of feed were provided to each treatment group by Flat, Down-Up-Down (DUD), Up-Down-Up (UDU) and Down-Up-Up (DUU) feeding methods. The experimental diet was formulated to meet or exceed the standards of NRC (1998). Body weight gain of gestating gilts from d 0 to 110 was affected by feeding method (p<0.05). When gilts were fed constant feed ration (Flat feeding), less body weight loss was observed during lactation (-0.9 kg, p<0.05) and desirable backfat thickness (average 19.5 mm) was acquired at 110 days of gestation. Feed intake of lactating sows tended to be greater (4.22, 3.60, 3.97 and 4.13 kg/d, p>0.05) as sows in Flat feeding treatment had lower backfat thickness during gestation compared with other treatments (p<0.05). When gestating gilts were fed higher amount of feed during mid-trimester, the number of stillborn (1.4 piglet per litter, p<0.05) and mummies (0.8 piglet per litter, p = 0.25) were increased compared to other treatments. Feeding methods for gestating gilts had no effect on litter weight and gain of litter weight during the nursing period. Flat feeding method resulted in decreased plasma glucose concentration at 7 d postpartum (p<0.05), and increased LH concentration at 21 d postpartum (p<0.01) compared to other treatments. These results suggested that higher feed intake of gestating gilts resulted in detrimental effects on body condition and reproductive performance of sows. When gestating gilts consumed constant feed during gestation (2 kg/d), better reproductive performance and less body weight loss in lactation were observed because sows consumed more feed during the whole lactation period. Consequently, Flat feeding will be a desirable feeding strategy for gestating gilts to maximize reproductive performance, and better body condition of sows without any negative influence on the growth of their progeny.
The purpose of this study is to examine the works of choreographer Philippe $Decoufl{\acute{e}}$ and the performance costumes designer Philippe Guillotel, and identify the intrinsic values shown in the formative characteristics in their works. And it proposes a vision and a direction for the development and performance of modern fashion phenomenon of media convergence performing arts complex. The results were as follows. First, the performance characteristics shown in Philippe $Decoufl{\acute{e}}$'s art pattern applies dynamic improvisation, decategorization reflected in the media interactivity, time and space of a variable scalability, complex artistic genres and transcends cultural boundaries. Second, the characteristics of the performance costume can be described as a co-existence between dynamics of aesthetic layers, 'Media body' represented by the interaction of the compounds with the technology, and integrated variable expandability. And aesthetic values inherent in the performance costumes are summarized as abstraction, playfulness, reproducibility, and theatricality. Modern fashion performance and limited production of the center 'costumes' in the fashion images can be used in diverse ways, and innovative marketing has gone through a change in image production. Metaphysical text of the advanced performance genre can be presented in a new perspective to fashion derivatives 'Media body'. And the aesthetics of popular culture kitsch, the grotesque, and surrealism in theater will produce creative stage direction.
Proceedings of the Korea Air Pollution Research Association Conference
/
2000.11a
/
pp.419-420
/
2000
The present study introduces and describes the characteristics of the spiral guide and groove body cyclones for the first time. The spiral guide was set inside the cyclone body or the inside of the cyclone body was grooved circumferentially or vertically. Except for the cyclone body, all configurations were the same. The particle collection efficiency for a conventional cyclone (Figure 1) was measured under a series of flow rates ranging from 15 L/min up to 80 L/min, and was compared with that yielded using existing theories. (omitted)
The purpose of this study was to compare consumer satisfaction by analyzing importance on characteristics of clothing, performance, and their inconsistency between Korea and the United States. The data was collected by using a survey based on three sages of pre-tests, and main survey conducted in The U.S and Korea. Data of 520 participants from each country (260 males and 260 females) was used. The results of this study is as follows: First, both consumers in Korea and U.S. showed five factors such as aesthetics/trend, body shape, practical use/wearing, care, and distorted. In performance factor of Korean students was consisted of wearing/care, aesthetics, body shape, distorted, and trend/symbolism while that of American students was consisted of wearing, aesthetics, body shape, trend/image factor, and distorted. Second, regarding importance rate, aesthetics/trend, practical use/wearing, care, and distorted affected satisfaction of Korean students whereas aesthetics/trend factor affected satisfaction of American students. Regarding performance, body shape factor, distorted, trend/symbolic affected satisfaction of Korean students whereas trend/image affected satisfaction of American students. Third, satisfaction of Korean and American students influenced re-purchase intention and positive word-of-mouth, so proved to be the result variable of satisfaction. By understanding the differences between consumers in Korea and U.S., apparel importers and exporters may develop effective business strategies to better fulfill their customers' needs and desires, and therefore, increase their profit.
This study was conducted to investigate the growth performance between six different Korean crossbred native chickens. A total of 312 one-day-old male chickens from the same paternal line with six different maternal lines were allocated into six groups (1A, 2A, 3A, 4A, 5A, and 6A) to give four replicate cages (13 birds per cage). Corn soybean meal based diets were provided as a starter (0 - 5 weeks: 20% crude protein [CP] and 3,050 kcal/kg metabolizable energy [ME]), grower (5 - 8 weeks: 18% CP, 3 and 100 kcal/kg ME) and finisher (8 - 12 weeks: 17% CP and 3,150 kcal/kg ME) diet. Chickens were able to access their respective feed and water ad libitum. In week 2, 2A had a lower body weight (p < 0.05) than that of the other groups. In contrast, in weeks 4 and 8, 2A had a higher body weight (p < 0.05). Similarly, in week 6, 2A had a higher body weight (p = 0.76) than that of the others. However, no difference (p > 0.05) was observed in the body weight after week 10. Meanwhile, 2A had a lower feed conversion ratio (FCR) than that of the other groups (p < 0.05) and a higher average daily feed intake (ADFI; p < 0.05) compared to the other groups in week 6. In conclusion, crossbred 2A had a lower growth performance in week 2; however, in weeks 4 and 6, 2A had a higher growth performance than that of the other groups. Based on this conclusion, we can use those results as a basis for further study.
The objective of this study is to identify the kinematic variables of giant swing backward to handstand as well as individual variations of each athlete performing this skill, which in turn will provide the basis for developing suitable training methods and for improving athlete's performance in actual games. For this end, 3 male athletes, members of the national team, who are in ${\Box}{\Box}H{\Box}{\Box}$ University, have been randomly chosen and their giant swing backward to handstand performance was recorded using two digital cameras and analyzed in 3 dimensional graphics. This study came to the following conclusion. 1. Proper time allocation for giant swing backward to handstand are: Phase 1 should provide enough time to attain energy for swing track of a grand round movement. The phase 3 is to throw the body up high in the air and stay in the air as long as possible to smoothen up the transition to the next stage and the phase 4 should be kept short with the moment arm coefficient of the body reduced. 2. As for appropriate changes of locations of body center, the phase 1 should be comprised of horizontal, perpendicular, compositional to make up a big rotational radius. Up to the Phase 3 the changes of displacements of vertical locations should be a good scale and athlete's body should go up high quickly to increase the perpendicular climbing power 3. When it comes to the speed changes of body center, the vertical and horizontal speed should be spurred by the reaction of the body in Phase 2 and Phase 3. In the Phase 4, fast vertical speed throws the body center up high to ensure enough time for in-the-air movement. 4. The changes of angles of body center are: in Phase 2, shoulder joint is stretching and coxa should be curved up to utilize the body reaction. In the Phase 4, shoulder joint and coxa should be stretched out to get the body center as high as possible in the air for stable landing. 5. The speeds of changes in joints angles are: in the Phase 2 should have the speed of angles of shoulder joints increase to get the body up in the air as quickly as possible. The Phase 3 should have the speed of angles in shoulder joint slow down, while putting the angles of a knee joint up to speed as quickly as possible to ensure enough time for in-the-air movement.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.