• Animal Bioscience
• /
• v.37 no.4
• /
• pp.668-677
• /
• 2024

Objective: The current experiment was performed to investigate the influence of different dietary levels of Moringa oleifera leaf meal (MOLM) on productive performance, nutrient digestibility, blood parameters, immune response, caecal microbiota, and carcass characteristics of Muscovy ducks (Cairina moschata) during 7 to 63 d of age. Methods: A total of 240 unsexed 7-d-old ducklings were distributed into five (treatment) groups; each one contained six replicates with eight ducklings each. Birds of the first group were fed basal diet without MOLM and served as control, while the other four groups were fed basal diet with 0.25%, 0.50%, 1.0%, and 2.0% MOLM inclusion level, respectively. Results: The obtained results revealed that including MOLM in the diets significantly improved body weight, body weight gain, feed conversion ratio and economic efficiency compared with the control group. Among the different MOLM inclusion treatments, increasing MOLM inclusion level decreased (p<0.05) such previous parameters. Decreasing MOLM inclusion levels in duckling diets increased (p>0.05) the digestibility of organic matter, crude protein, ether extract, and nitrogen free extract, however all MOLM treatments were significantly higher than the control group. Results also revealed that feeding ducks lower MOLM inclusion levels (0.25% or 0.50%) improved blood parameters (p<0.05) compared with the higher inclusion levels (1.0% or 2.0% MOLM) and the control group. Ducks fed different MOLM levels had significantly higher phagocyte index and activity, immunoglobulin G (IgG), IgM, total antioxidant capacity, glutathione peroxidase activity, and superoxide dismutase activity compared with control group. Conclusion: Despite the beneficial effects of all MOLM treatments on growth performance, nutrient digestibility, physiological status, and immune response of duckling, the increasing MOLM inclusion level in the diet had deleterious effects on such studied traits, consequently 0.25% was the best MOLM inclusion level in duckling diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.864-872
• /
• 2018

Objective: The objective of this study was to determine the effect of weaning age on intake, performance, nutrition metabolism and serum parameters of beef calves. Methods: Sixty Droughtmaster crossbred calves were assigned to 5 groups with 12 calves in each group. The calves in control group remained with the dams till the 22-week age, while the calves weaned at 28 d (4 wk), 42 d (6 wk), 56 d (8 wk), and 70 d (10 wk) of age were sent to group 4 wk, group 6 wk, group 8 wk, and group 10 wk, respectively, and then were fed on milk replacer till the 22-week age. Feed intake and body weight and size were record and blood metabolites were measured. And 24 calves of them (6 in each group) were picked randomly for digestion and metabolism trail. Feed, feces and urine sample were taken and measured. Results: Dry matter intake of calves in group 4 wk was significantly lower than those in the remaining groups from wk 17 to 22 (p<0.05). Feed efficiency of the calves was higher in groups 4 wk and 6 wk than those in groups 8 wk and 10 wk from 11 to 13 wk (p<0.05), and calves had higher feed efficiency in group 4 wk, group 6 wk, and group 8 wk than those in group 10 wk from wk 14 to wk 22. Calves in group 4 wk and 6 wk had lower body weight than group 8 wk and group 10 wk and control group at 10-week age (p<0.05) and 13-week age (p<0.05), and calves in group 6 wk had no significant difference in body weight with control group, group 8 wk and 10 wk (p>0.05) but was higher than that of group 4 wk (p<0.05). Calves in group 6 wk had higher final body weight and total gain than group 4 wk, but no difference of total gain with that of groups 8 wk, 10 wk, and control group. And weaning calves at 6-week age brought higher feed efficiency and average daily gain from wk 14 to wk 22, and higher dry matter and organic matter digestibility at 21 wk. Conclusion: It is concluded that the weaning of calves at 6 weeks of age gave positive results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1717-1725
• /
• 2000

The objective was to determine the relationship between feed intake levels and patterns, and growth performance and body composition of barrows and gilts using automatic feed intake recording equipment (F.I.R.E.). This system records the time of visits to the feeder and the duration and size of meals for individual animals housed in groups. Ninety-six crossbred pigs were grown from $33.4{\pm}0.51$ to $109.7{\pm}1.39kg$ live weight over a 13-week period. Eight mixed-sex groups of 12 pigs were used and 4 dietary treatments were compared giving 2 pens per treatment. The dietary treatments consisted of corn-soybean meal diets with differing protein levels which ranged from 14.7% to 19% between 30 to 55 kg, from 13.3% to 16.9% between 56 and 85 kg, and from 12.3% to 16.8% for the remainder of the study. Animals were ultrasonically scanned to measure loin-eye area and backfat thickness to estimate carcass fat-free lean content at the beginning and end of the study. Barrows had higher daily feed intake than gilts (2.67 vs. 2.46 kg resp. p<0.05) which was the result of a longer feeder occupation time per visit (4.77 vs. 4.54 min, resp. p<0.05), higher feed consumption rates (30.4 vs. 29.0 g/min, resp. p<0.05), and higher feed intakes per visit (136.9 vs. 126.8 g, resp. p<0.01). Gilts had less backfat and greater loin-eye area than barrows (p<0.05). Diet had no significant effect on growth performance and had limited impact on feeding patterns. Body weight showed high correlations with ADG (r=0.74), feed intake per visit (r=0.51) and feed consumption rate (r=0.69). Positive correlation were also found between daily feed intake and feed intake per visit (r=0.45), feeder occupation time per day (r=0.56), and feed consumption rate (r=0.55), and between daily feed intake and backfat thickness (r=0.32) and feed consumption rate and loin-eye area (r=0.32). There were negative correlations between number of feeder visit per day and daily feed intake (r=-0.54), and between feed intake per visit and number of feeder visits per day (r=-0.43). However, correlations between feed intake traits and carcass traits were generally low. Visits to the feeder were greatest during the morning (0700 to 1100 h) and lowest during the evening and nighttime. These results highlight limited variation among the sexes in feeding patterns and suggest important relationships between feeding behavior and feed intake.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.470-475
• /
• 2013

The objective of this study was to estimate genetic parameters that are to be used for across-herd genetic evaluations of seed stock pigs at GGP level. Performance data with pedigree information collected from swine breeder farms in Korea were provided by Korea Animal Improvement Association (AIAK). Performance data were composed of final body weights at test days and ultrasound measures of back fat thickness (BF), rib eye area (EMA) and retail cut percentage (RCP). Breeds of swine tested were Landrace, Yorkshire and Duroc. Days to 90 kg body weight (DAYS90) were estimated with linear function of age and ADG calculated from body weights at test days. Ultrasound measures were taken with A-mode ultrasound scanners by trained technicians. Number of performance records after censoring outliers and keeping records pigs only born from year 2000 were of 78,068 Duroc pigs, 101,821 Landrace pigs and 281,421 Yorkshire pigs. Models included contemporary groups defined by the same herd and the same seasons of births of the same year, which was regarded as fixed along with the effect of sex for all traits and body weight at test day as a linear covariate for ultrasound measures. REML estimation was processed with REMLF90 program. Heritability estimates were 0.40, 0.32, 0.21 0.39 for DAYS90, ADG, BF, EMA, RCP, respectively for Duroc population. Respective heritability estimates for Landrace population were 0.43, 0.41, 0.22, and 0.43 and for Yorkshire population were 0.36, 0.38, 0.22, and 0.42. Genetic correlation coefficients of DAYS90 with BF, EMA, or RCP were estimated to be 0.00 to 0.09, -0.15 to -0.25, 0.22 to 0.28, respectively for three breeds populations. Genetic correlation coefficients estimated between BF and EMA was -0.33 to -0.39. Genetic correlation coefficient estimated between BF and RCP was high and negative (-0.78 to -0.85) but the environmental correlation coefficients between these two traits was medium and negative (near -0.35), which describes a highly correlated genetic response to selection on one or the other of these traits. Genetic Trends of all three breeds tend to be towards bigger EMA or greater RCP and shorter DAYS90 especially from generations born after year 2000.

• IE interfaces
• /
• v.17 no.3
• /
• pp.314-329
• /
• 2004

The rapid growth of investments in mobile service to reach a large and growing body of customers, coupled with low communication costs, has made user acceptance an increasingly critical management issue. The study draws upon the task-technology fit (TTF) model as its theoretical basis and its empirical findings to pragmatically explain the key factors that affect the performance and user acceptance of mobile service in medical field. A total of 110 usable responses were obtained. The findings indicate that the task, technology, and individual user characteristics positively affect task-technology fit and mobile service usage. The task-technology fit and mobile service usage are the dominant factors that affect mobile service performance. The result points out the importance of the fit between technologies and users' tasks in achieving individual performance impact from mobile service in medical arena.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.667-674
• /
• 2010

This study evaluated the convenience and heating performance of 4 heated vests on the market through a trial of the vests. Participants were four healthy men who wore the garments outside in cold temperatures typical of the garments' real conditions of use. As the results, all the participants preferred the product, having an easily operable controller in ergonomic aspects and the good insulation for keeping the body temperature. The heating performance of vests was the most important factor in selecting the best product in this test. Indeed, the vests themselves found not to be sufficiently warm in the experimental condition. Thus, heated vests with the enhanced heating performance should be developed so that temperatures in the allowed range can be safely accessed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.514-519
• /
• 2011

Recently, the interest in technologies for a highly efficient powertrain, i.e. a variable displacement engine or a light weight car body, to improve the fuel efficiency of automobile saving the environment has been increased. However this trend deteriorates NVH performance of a vehicle and the use of a conventional engine mounting system becomes unsatisfactory. In order to solve this dilemma, an active engine mounting system that could isolate or cancel out vibrations occurred at the powertrain was suggested. In this paper, In order to optimize the electromagnetic active engine mount performance, the actuator of the engine mount through FEM analysis and optimal design, noise and elastomer testing of the prototype through the optimal design of actuators for the electromagnetic active engine mount on the impact of the performance improvement is verified.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2612-2615
• /
• 2008

Diaphragm seals have great effects on the performance of large power-generation steam turbines. Hence, it is important to decrease the leakage flow through the diaphragm seals and understand the flow characteristics within the diaphragm seals. In this study, numerical analysis was carried-out with the seals of large one-body type diaphragms developed by a domestic company. CFX, which is a commercial CFD code, was used to analyze the performance and flow characteristics of the diaphragm seals for three difference clearance cases. The results of numerical analysis show variations in the performance and flow characteristics according to the changes of labyrinth seal clearance.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.805-810
• /
• 2005

The main functions of suspension system of railway vehicle are isolating vibration from track irregularity to car-body for the Ride quality and keeping its stability with limitation of vehicle's movement. These two functions conflict with each other, then it is impossible to achieve both of performance with traditional passive suspension which has constant characteristics. So, to improve this situation the active suspension was suggested and in specially the semi-active suspension is noticed for its effectiveness on cost despite of its lower performance than full-active suspension. In this study the control logic made through LQG theory was designed with simplified vehicle model and variable damper model defined by $1^{st}$ order system, then the analysis of simulation results was done to understand influence on the performance of semi-active suspension with running conditions and response characteristics of variable damper.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.235-238
• /
• 2009

The study of our investigating and analyzing through experiments the performance on nonslip techniques, which has been nationally applied and represented, showed the following results. 1) In wearing shoes condition, regardless the shape of the surface and surface condition of the object, it satisfied the performance standard in cleaned and dried condition and the pulverulent body mixed liquid dispersed moisture condition. However, for the case of the non-slip agent treatment, not likely as the non-slip tape treatment case, the effect was not approved as it shows almost the same CSR as none treatment. 2) In bare foot condition, it satisfied the performance standard in most of the objects except for the Ceramic tile (A), Ceramic tile (B), pure and soapy water dispersed condition.