• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.77-83
• /
• 2020

A uniflow cyclone has simple structure with a single channel in one direction. The one directional particle removal enables the uniflow cyclone to have compact size and low pressure drop. However, it has low collection efficiency compared to conventional cyclones. In this study, the effect of primary geometry on the performance of a uniflow cyclone with swirl vane is numerically investigated for the design of high performance uniflow cyclone. It is found that as the vortex finder diameter is increased, the pressure drop and the collection efficiency are decreased. Also, the same trend is predicted when the vortex finder height is increased. The best collection efficiency is predicted to be obtained when the vortex finder height is equal to the diameter of a cyclone. Reducing the body height by half will increase the pressure drop by 41%. When the body height is decreased, the collection efficiency is first increased and then decreased. The best collection efficiency is obtained when the body height is 4~5 times the cyclone diameter. Overall, the particle collection efficiency is highest when the Dν/D is equal to 0.3. But, the pressure drop is as high as 1592 Pa. Considering both collection efficiency and pressure drop, the best design is when Dν/D, Hν/D, and Hb/D are equal to 0.5, 1, and 5, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.455-467
• /
• 2020

Shape design optimization for Blended-wing-body Underwater Gliders (BWBUGs) is usually computationally expensive. In our previous work, a simplified shape optimization (SSO) strategy is proposed to alleviate the computational burden, which optimizes some of the Sectional Airfoils (SAs) instead of optimizing the 3-D shape of the BWBUG directly. Test results show that SSO can obtain a good result at a much smaller computational cost when three SAs are adopted. In this paper, the performance of SSO is investigated with a different number of SAs selected from the BWBUG, and the results are compared with that of the Direct Shape Optimization (DSO) strategy. Results indicate that SSO tends to perform better with more SAs or even outperforms the DSO strategy in some cases, and the amount of saved computational cost also increases when more SAs are adopted, which provides some reference significance and enlarges the applicability range of SSO.

• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.133-137
• /
• 2015

We investigated the effects of supplementing low energy diets with lysolecithin and sodium stearoyl-2-lactylate on growth performance and nutrient digestibility in broilers. A total of 768 1-d-old Ross 308, mixed gender broiler chicks with an average initial body weight of 44.3 g, were used in a 35-d feeding trial. Broiler chicks were sorted into pens with 16 birds per pen and every treatment consisted of 12 pens (192 chickens per treatment). Treatments were: 1) PC: basal diet, 2) NC: PC-100 kcal, 3) T1: NC+ 0.08% lysolecithin, and, 4) T2: NC + 0.04% sodium stearoyl-2-lactylate. Body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) were measured on a weekly basis. Chromium oxide was added to the diets at 0.2% on the last week of the experiment, as a marker for digestibility. Dietary treatments had no effect on growth performance for days 1 to 21. Low energy diet supplemented with lysolecithin and sodium stearoyl-2-lactylate in phase 2 (d 21 to 35) improved body weight gain (P<0.05). Addition of lysolecithin and sodium stearoyl-2-lactylate to the diets improved the digestibility of energy and nitrogen (P<0.05), but digestibility of dry matter was not affected. Overall, addition of an emulsifier to the diet of broiler chickens in the late growth phase enhanced growth performance and digestibility of energy and nitrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.226-233
• /
• 2010

Different dietary cereal sources and fat types in the lactation diet were evaluated to investigate their effects on reproductive performance, milk composition, blood metabolites and hormones in multiparous sows. Twenty-four sows were randomly assigned to one of four treatments according to a 2${\times}$2 factorial arrangement of treatments. Each treatment had 6 replicates comprising 1 sow. Two cereal (corn or wheat) and two fat (tallow or soybean oil) sources were used to prepare iso-caloric and iso-nitrogenous diets. Sows fed corn-based diets lost less body weight (p = 0.003) and backfat thickness (p = 0.034), consumed more feed (p = 0.032) and had shorter wean-to-estrus interval (p = 0.016) than sows fed wheat-based diets. Fewer piglets and lower body weight of piglets (p<0.05) at weaning were noted in sows fed wheat-based diets than in sows fed corn-based diets. However, no significant effects (p>0.05) of dietary fat source and its interaction with dietary cereal source on sow body condition and reproductive performance were observed during lactation. Feeding of a corn-based diet improved (p<0.05) sow milk total solid, protein and fat, increased blood urea nitrogen (p = 0.032) and triglyceride (p = 0.018), and decreased blood creatinine (p = 0.011) concentration at weaning when compared with sows fed wheatbased diets. Sows fed corn-based diets had higher concentration of insulin (p = 0.048) and LH (p<0.05) at weaning than sows fed wheatbased diets. The results indicate that feeding corn-based diets to lactating sows improved sow body condition and reproductive performance compared with wheat-based diets regardless of fat sources.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1257-1258
• /
• 2006

Biomimetic apatite deposition behaviors and mechanical performance for as-rolled and annealed Ni-Ti plates were investigated . A good biomimetic apatite formation and excellent mechanical performance of Ni-Ti suggests that Ni-Ti can be an excellent candidate material as orthopedic implants.

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.232-236
• /
• 2017

In this study, We investigated the effect of foot cooling on the reduction of body temperature after hard exercise at the high temperature of $40^{\circ}C$. We performed a total of 30 subjects, and the subjects performed treadmill exercise for 30 minutes. We produced the cooling device to cool the foot using Peltier module. After the end of the exercise, We performed normal recovery method and cooling recovery method(one foot, both feet) for 1 hour on the same indoor environmental conditions and confirmed the change of body temperature of subjects. The results of deep body temperature measurement showed average $38.78{\pm}0.22^{\circ}C$ to $38.54{\pm}0.15^{\circ}C$ when the normal recovery method was performed. Cooling recovery method on one foot showed average $38.69{\pm}0.14^{\circ}C$ to average $38.06{\pm}0.17^{\circ}C$ and Cooling recovery method on both feet showed average $38.69{\pm}0.15^{\circ}C$ to average $37.84{\pm}0.21^{\circ}C$. There was a significant difference between the normal recovery method and the one foot cooling recovery method(p < .05), there was a significant difference between the normal recovery method and the both feet cooling recovery method(p < .05) and there was a significant difference between the one foot cooling recovery method and the both feet cooling recovery method(p < .05). Body temperature showed the lowest decrease rate when the normal recovery method was performed, and body temperature showed the highest decrease rate when the both feet cooling recovery method was performed. Therefore, recovery of cooling on the foot after hard exercise have decreased body temperature, delay fatigue in the body, and will be contributed to improvement of athlete performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.1
• /
• pp.29-35
• /
• 2016

The aim of the present study was to investigate the effect of single nucleotide polymorphisms in the major histocompatibility complex (MHC) class II gene on resistance to Newcastle disease virus and body weight of the Thai indigenous chicken, Leung Hang Khao (Gallus gallus domesticus). Blood samples were collected for single nucleotide polymorphism analysis from 485 chickens. Polymerase chain reaction sequencing was used to classify single nucleotide polymorphisms of class II MHC. Body weights were measured at the ages of 3, 4, 5, and 7 months. Titres of Newcastle disease virus at 2 weeks to 7 months were determined and the correlation between body weight and titre was analysed. The association between single nucleotide polymorphisms and body weight and titre were analysed by a generalized linear model. Seven single nucleotide polymorphisms were identified: C125T, A126T, C209G, C242T, A243T, C244T, and A254T. Significant correlations between log titre and body weight were found at 2 and 4 weeks. Associations between single nucleotide polymorphisms and titre were found for C209G and A254T, and between all single nucleotide polymorphisms (except A243T) and body weight. The results showed that class II MHC is associated with both titre of Newcastle disease virus and body weight in Leung Hang Khao chickens. This is of concern because improved growth traits are the main goal of breeding selection. Moreover, the results suggested that MHC has a pleiotropic effect on the titre and growth performance. This mechanism should be investigated in a future study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.410-418
• /
• 2009

Based on a linear potential theory, the boundary element method(BEM) is developed and applied to analyze the hydrodynamic forces and the motion responses of a floating body with a partially reflective sidewall. The hydrodynamic forces (added mass and damping coefficients) are dependent on not only the submergence of a floating body and the reflection of a sidewall, but also the gap between body and sidewall. In particular, the partial reflection of a sidewall plays an importance role in the motion responses of a floating body at resonant frequencies. It reduces the resonant peaks caused by resonance phenomenon due to the wave trapping in an enclosed fluid domain between body and sidewall. Developed predictive tools can be used to assess the motion performance of a floating body for various combinations of configuration of a floating body, wave heading, sidewall properties, and wave characteristics and applied to supply the basic informations for the harbour design considering the motion characteristics of a moored ship.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.6
• /
• pp.127-134
• /
• 2016

WBSN (Wireless Body Sensor Network), also called WBAN (Wireless Body Area Networks) generally, is a kind of WSN (Wireless Sensor Network) applications, which is composed of the various sensor nodes residing in human body embodied or in wearable way. The measured data at each sensor node in WBSN requires being synchronized at sink node for exact analysis for status of human body, which is like WSN. Although many time synchronization protocols for WSN has been already developed, they are not appropriate to WBSN. In this paper, a new time synchronization protocol for WBSN considering the characteristics of WBSN is proposed. The proposed scheme is not only simple, but also consumes less power, leading to increasing network life time. We will show that the proposed scheme is appropriate to WBSN by evaluating its performance by simulation.

• The Research Journal of the Costume Culture
• /
• v.26 no.6
• /
• pp.823-835
• /
• 2018

The body is an important object of costume expression, and the reflection of the aesthetics of the body according to age, culture, individual or group determines the form of the costume. In particular, British artist Leigh Bowery provided many designers and celebrities with original design ideas. Leigh Bowery's costumes are related to the carnival concept. Thus, this study analyzed Leigh Bowery's life and works, and examined Michael Bakhtin's grotesque carnivalesque theory. Based on Bakhtin's carnival theory around 100 works by Leigh Bowery, in the form of YouTube videos and DVD clips were analyzed in this study. The results of the analysis Leigh Bowery's body and costume research are as follows. First, this study can define fetishism as a characteristic of costumes such as body suits, harnesses, high-heeled boots, and stockings, that stress the body. Second, the character of the body is not expressed as that of an idealized body, but the fat and ugly aspect are revealed. Third, Leigh Bowery's costumes are characterized by ambiguity. The costumes blur the boundaries between women and men. Fourth, common sense, combined with normal and bizarre, brings out a strong sense of carnival humor with ridiculousness arising from the gap between reality and reality. His performance has had a significant impact on victims of discrimination or unequal treatment in sexual, racial, and age-related situations. This study should inspire many designers through the study of Leigh Bowery's body expression and dress, but it also introduces fashion icons that are not well known in Korea.