• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1351-1356
• /
• 2012

The objective of this study was to compare body weight, ADG, and feed:gain ratio of antibiotic-free pigs from Yorkshire dams and sired by Yorkshire (YY), Berkshire (BY), Large Black (LBY) or Tamworth (TY) boars. All the crossbred pigs in each of three trials were raised as one group from weaning to finishing in the same deep-bedded hoop, providing a comfortable environment for the animals which allowed rooting and other natural behaviors. Birth, weaning and litter weights were measured and recorded. From approximately 50 kg to market weight (125 kg), feed intake and body weights were recorded manually (body weight) or using a FIRE (Feed Intake Recording Equipment, Osborne Industries Inc. Osborne, Kansas) system with eight individual feeding stations. Feed intake data for 106 finishing pigs between 140 and 210 d of age and the resulting weights and feed conversion ratios were analyzed by breed type. Least square means for body weights (birth, weaning and to 240 d) were estimated with Proc Mixed in SAS 9.2 for fixed effects such as crossbreed and days of age within the sire breed. The differences within fixed effects were compared using least significant differences with DIFF option. Individual birth weights and weaning weights were influenced by sire breed (p<0.05). For birth weight, BY pigs were the lightest, TY and YY pigs were the heaviest but similar to each other and LBY pigs were intermediate. For weaning weights, BY and LBY pigs were heavier than TY and YY pigs. However, litter birth and weaning weights were not influenced by sire breed, and average daily gain was also not significantly different among breed types. Tamworth sired pigs had lower overall body weight gain, and feed conversion was lower in TY and YY groups than BY and LBY groups (p<0.05), however, number of observations was somewhat limited for feed conversion and for Tamworth pigs. Overall, no convincing differences among breed types were noted for this study, but growth performance in the outdoor environment was satisfactory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.752-759
• /
• 2010

The low power consumption is the most important design factor for the In-Body communication system of WBAN. The conventional PSSK (Phase-Silence-Shift-keying) modulation technique can be regarded as an extension from PSK modulation. And this PSSK has better power efficiency than PSK modulation, and higher spectral efficiency than FSK modulation. PSSK modulation is to transmit two orthogonal symbols. The transmission power can be lowered because the symbol rate in signal period becomes half. BER performance is improved because transmission power is lower and the modulation symbol distance is widened. In addition, PSSK preserve the low-power and increase the data rate than FSK. In this paper, we analyzed existing PSSK and like to propose a new PSPM (Phase-Shift-Position-Modulation) modulation scheme. This PSPM is evaluated in terms of considered bandwidth efficiency and BER performance, compared with the PSSK. This PSPM modulation method transmits the information data by both PSK symbol data and symbol position data, so that we can significantly improve the power efficiency. New proposed PSPM method could be very useful for the In-body communication that requires the most power efficient system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2009

For a realization of the ubiquitous society, applying IT to vehicle industry has recently been an attractive issue to make wireless communication in body area network possible to everywhere. In this paper, we propose the physical layer symbol structure based on PPM scheme of the IEEE 802.15.4a for the off-body high data rate WBAN system. We propose four symbol structures which is classified according to the number of the chip and whether the channel coding is used or not. We calculate the required SNR through the link budget calculation and the recently proposed off-body WBAN channel environment was applied in the simulation. The results of four systems show that small number of burst's chip enhances the performance and the system is capable to achieve the data rate of 10 Mbps.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1348-1354
• /
• 2003

The feeding value of high-oil corn fed to Taiwan Country (TC) chicken was examined by measuring apparent metabolizable energy (AME), growth performance, sexual maturity, carcass characteristics, and plasma pigmentation. In a completely randomized design, 870 sex-intermingled one-wk-old chicks were assigned to one of 30 floor pens, 29 birds per pen, and each pen randomly assigned to one of five dietary treatments. The experiment was ended when birds were 16 wk of age. The five dietary treatments varied in main fat sources, which were corn oil (CO), high-oil corn (HOC), lard (LRD), whole soybean (WSB) and yellow corn (YC), respectively. All the diets were formulated isonitrogenously, isocalorically, and of equal lysine and methionine contents except YC, in which equal amounts of YC replaced HOC. The results indicated that feed conversion in HOC was 8% higher (p<0.05) than YC whereas the calculated AME of HOC was only 3.5% to 4.0% higher than that of YC. No significant differences were observed in body weight, body weight gain, feed consumption, feed conversion ratio and ME efficiency for body weight gain among CO, HOC, LRD, and WSB. No significant differences existed in both skin and muscle pigmentation of breast among the five dietary treatments. No significance differences existed in plasma carotenoid content measured at various ages among the five dietary treatments except that birds fed with HOC had less (p<0.05) plasma carotenoids at 16 wk-old. The results indicate that if the price of high-oil corn is no more than 1.05 times that of yellow corn, the dietary cost per kg of body weight gain for TC chickens fed diets containing high-oil corn will be less, although their body weight may be lighter compared to chickens fed diets formulated with other fat sources.

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.195-204
• /
• 2005

The current study was conducted to investigate the effects of dietary conjugated linoleic acid(CLA) on growth performance and body fat metabolism in broiler chickens. A total of 48 male birds aged 3 days were randomly allotted into three dietary groups; CORN(com oil 1.5%), CLA I (com oil 0.75 %+ CLA 0.75 %) and CLA II(CLA 1.5%) groups. After feeding commercial diet ad libitum for 3 weeks, eight selected birds on the basis of body weight were housed, two birds in a cage, and continuously given ad libitum corresponding experimental diet for another 2 weeks. As a result, dietary addition of CLA did not influence on body weight, gain and feed conversion rote. The relative weights of the liver and deposited fats(abdominal and thigh fat' pads) were not also affected by the dietary treatments. Serum glucose, triglyceride and cholesterol levels markedly( P < 0.05) decreased in CLA II compared with those in CORN group. However, serum nonesterified fatty acid(NEFA) was not altered by dietary CLA. Serum leptin level was tended to be decreased by dietary CLA without statistical difference. The diet supplemented with CLA caused a significant(P< 0.05) decrease in hepatic total lipid and NEFA without changing triglyceride level. Also, feeding dietary CLA at the level of 1.5% reduced leptin mRNA expression in the liver and abdominal fats compared with feeding com oil, In conclusion, our results suggest that dietary 1.5% CLA may affect, at least in part, lipid metabolism in the liver of broiler chickens.

• Toxicological Research
• /
• v.33 no.2
• /
• pp.165-171
• /
• 2017

Bisphenol A (BPA) is a monomer used in a polymerization reaction in the production of polycarbonate plastics. It has been used in many consumer products, including plastics, polyvinyl chloride, food packaging, dental sealants, and thermal receipts. However, there is little information available on the inhalation toxicity of BPA. Therefore, the aim of this study was to determine its inhalation toxicity and effects on the estrous cycle, spatial learning, and memory. Sprague-Dawley rats were exposed to 0, 10, 30, and $90mg/m^3$ BPA, 6 hr/day, 5 days/week for 8 weeks via whole-body inhalation. Mortality, clinical signs, body weight, hematology, serum chemistry, estrous cycle parameters, performance in the Morris water maze test, and organ weights, as well as gross and histopathological findings, were compared between the control and BPA exposure groups. Statistically significant changes were observed in serum chemistry and organ weights upon exposure to BPA. However, there was no BPA-related toxic effect on the body weight, food consumption, hematology, serum chemistry, organ weights, estrous cycle, performance in the Morris water maze test, or gross or histopathological lesions in any male or female rats in the BPA exposure groups. In conclusion, the results of this study suggested that the no observable adverse effect level (NOAEL) for BPA in rats is above $90mg/m^3$/6 hr/day, 5 days/week upon 8-week exposure. Furthermore, BPA did not affect the estrous cycle, spatial learning, or memory in rats.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.180-187
• /
• 2021

This thesis explores the place and role of a performer's action from a perspective of a director and playwright David Mamet's concept for performer training. This thesis takes inspiration from the idea of Mamet's simple and practical investigation specifically in text-based approach with a performer's bodily function on stage. For Mamet, the writings and practices of many different body-centered training are not rooted in the principle and nature of acting/performance. Reconsidering complicated approaches particularly psychological-oriented theory, practice, and assumption draw on several practitioners takes us beyond the field of visible and/or outer appearance of a performer which in turn leads the performer's body to be as abstract therefore not to being in the moment on stage. Arming the points, we argue that whatever disciplines and/or methods necessarily need to meet the principles and demands of acting/performance/theatre to connect to the materials, an action/objective given by a specific playwright which the performer must inhabit through his/her body. Out of the context, any 'method' serves no purpose. That is, the mechanics of an action is an extension of addressing what a performer's specific needs which shifts his/her body to respond appropriately to the theatrical demands. Taking this argument further, we claim that the purpose of performer training should not be understood as learning and improving techniques or skills for his/her self-perfection. The research finding shows that this resembles to the phenomenon that the visible very often precedes the invisible where the performer's body lose a clarity with no more chance to happen and/or change the event(s). Rather, it is a process of learning what/how to learn which in turn brings us back to the central question of why we do training for what purpose in this contemporary era. Exploring and answering these questions is not only a way to employ the key materials applicable to the theatrical demands but also to achieve the identify as a professional performer/doer on stage.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1094-1102
• /
• 2008

Through the motion control experiment using Industrial Emulator(Model 220 by ECP), the performance comparison of three kinds of controllers such as PID, RIC and LQR was carried out. It was shown that RIC has the best performance in the presence of disturbances such as step one, sinusoidal one and Coulomb friction for the rigid body. LQR using feedback state variables has the best tracking performance far the flexible body. The performance of PID controller is low compared to other controllers, but the design process is simple. The most advanced controller is LQR. In order to attenuate disturbance, an additional state observer should be used to estimate it, making more complex control system. RIC lies between PID and LQR in view of complexity of design. Even though RIC is not complicated, it has good disturbance rejection ability and less tracking error. By considering these aspects, the RIC is suggested as high precision controller to be used in motion control system.

• The Journal of Korean Physical Therapy
• /
• v.22 no.4
• /
• pp.49-55
• /
• 2010

Purpose: The purpose of this study was to investigate the effects of isokinetic exercise on muscular performance and thickness of the quadriceps muscle. Methods: Twenty one healthy male students participated in this study. Participants were divided into 2 groups: $60^{\circ}/sec$ of isokinetic exercise (n=7), $180^{\circ}/sec$ (n=7) and $300^{\circ}/sec$ (n=7). Each group did isokinetic exercises 3 times a week for 6 weeks. Each group was measured for peak torque per body weight, average power and total work using a Biodex System 4. Rectus femoris, vastus laterails and vastus medialis were measured for muscle thickness using a SONOACE 6000C. Data were analyzed by repeated measures ANOVA using SPSS 12.0. Results: There was a significant time-related effect in peak torque per body weight, average power and total work. There was a significant time-related effect in the vastus medialis and rectus femoris muscle thickness. However, there was a significant group by time interaction for vastus laterlis muscle thickness. Conclusion: Isokinetic exercise may be an effective method for improving quadriceps muscle performance regardless of angular velocity. However, the thickness of the rectus femoris and vastus medialis muscle may be increased regardless of the angular velocity of the quadriceps muscle the vastus lateralis muscle may only be remarkably improved when doing exercise with low angular velocity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.235-242
• /
• 1993

In order to investigate the effects of dietary cellulose and protein levels on chick performance, four semi-purified diets were formulated so as to contain cellulose at levels of 5% (LC) and 20% (HC) in combination with 10% (LP) and 20% (HP) protein, and fed ad libitum to 1-week-old White Leghorn male chicks for 3 weeks. There were no significant differences in feed intake, body weight gain and feed efficiency between the LC-HP and HC-HP groups. All parameters were lower in the LP groups; the HC-LP group consumed very small amount of feed and lost body weight during the experiment. The retention rates of DM, ash, nitrogen and energy were higher in the HP than the LP groups. The triglyceride concentration of carcass was lower in the HC-LP group and that of liver was higher in the LC-LP group. The carcass total cholesterol level was higher in the HC-HP group. The relative weight of most digestive organs was higher in the HP group irrespective of the cellulose level. In conclusion, the chick performance was primarily influenced by dietary protein level, and when the chicks were fed inadequate levels of protein, the low cellulose level gave a better performance than the high cellulose level.