• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.654-664
• /
• 2017

The temperature profiles upon high speed impact of reactive structural materials were analyzed. A two color pyrometer, which included high-speed camera, spectral splitter, and band pass filters, was utilized to measure transient temperature profiles during and after reactive metal samples impacted into steel plate with velocities of 1600~1700 m/s. The spatial temperature distribution was analyzed from the ratio of spectral radiances at two different wavelength in infrared zone, i.e. 700 and 900 nm. The measured temperatures were calibrated with black body source. Two different types of metal samples, namely aluminum and nickel, were employed to understand reaction behavior upon the impact of samples in ambient condition. According to our experiments, the Ni sample appeared to barely react with ambient air producing an instant small fireball, while Al sample reacts violently with air generating a relatively prolong fireball.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.94-101
• /
• 2009

The physical properties of artificial aggregates made from clay and inorganic wastes with poor plasticity depends largely on forming method. The artificial aggregates composing of coal fly ash, stone sludge and clay were fabricated using 4 different forming methods and those physical properties were comparatively analyzed. The surface of aggregates made through the extrusion forming process was dense and smooth but was rough for the aggregates obtained by crushing a tile-shaped green body. The aggregates made by pelletizing process had a weak green strength and bumpy surface. The shell generated at surface during a high temperature sintering process induced the most aggregates to be bloated due to a dense shell. But the aggregates made through pelletizing process with dense surface layer showed no significant change in bulk density with sintering temperatures. The water absorption of aggregates decreased with sintering temperature, and that of pelletized specimen was standing $1.8{\sim}2.2$ times higher than that of made by other forming methods. It is concluded that the aggregates having various properties could be fabricated from one batch by using different forming methods.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권3호
• /
• pp.426-433
• /
• 2008

Heat stress is major welfare problem in the poultry industry. Huge economic losses occur every year because of mortality and decreased production due to high environmental temperatures. This experiment was conducted to determine the effects of level of inclusion of ascorbic acid supplementation to the diet on performance, carcass composition and bone characteristics of male turkeys during high summer temperature. A total of 120 day-old turkey chicks were wing banded at hatch and randomly distributed into 3 treatment groups. Three diets were formulated to provide a similar nutrient profile with the exception of using three graded levels of ascorbic acid, namely 0, 150 and 300 mg/kg of the diet. The experimental diets were used from 0 to 18 weeks of age. Body weights, feed intake and feed conversion ratio, slaughter weight, carcass yield, portions, composition and thigh and breast pigmentation of the turkeys were not affected by ascorbic acid (p>0.05). Also, shank and tibia bone characteristics were not affected by ascorbic acid (p>0.05).

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.45-51
• /
• 2015

Grade 91 steel is used for the major structural components of Generation-IV reactor systems such as a very high temperature reactor (VHTR) and sodium-cooled fast reactor (SFR). Since these structures are designed for up to 60 years at elevated temperatures, the prediction of long-term creep life is very important to determine an allowable design stress of elevated temperature structural component. In this study, a large body of creep rupture data was collected through world-wide literature surveys, and using these data, the long-term creep life was predicted in terms of three methods: Larson-Miller (L-M), Manson-Haferd (M-H) and Wilshire methods. The results for each method was compared using the standard deviation of error. The L-M method was overestimated in the longer time of a low stress. The Wilshire method was superior agreement in the long-term life prediction to the L-M and M-H methods.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권4호
• /
• pp.471-474
• /
• 1994

Five experimental groups with five adult male rats in each, were exposed to 20, 35, 40 and $45^{\circ}C$ air temperature for 50-70 minutes, and to $50^{\circ}C$ for 30-50 minutes, respectively. Food and drinking water were not permitted during the exposure. Blood samples were obtained by heart puncture immediately after the thermal treatment. All the rats were hyperthermic (p<0.01) as compared to the controls ($20^{\circ}C$). Hyperthermia was associated with hypoglycemia which was significant (p<0.01) at 45 and $50^{\circ}C$ exposures. Plasma levels of GOT and GPT declined at 35 and $40^{\circ}C$ reaching the lowest (p<0.05) level at $45^{\circ}C$, while at $50^{\circ}C$ GOT level was elevated by 45% but GPT was normal as compared to the controls. Differences between groups were significant (p<0.01) for GOT and insignificant for GPT. Hematocrit value increased significantly (p<0.01) at 45 and $50^{\circ}C$, indicating hemoconcentration. It could be concluded that severe heat stress (45 and $50^{\circ}C$) resulted in critical hyperthermia, hypoglycemia, disturbed liver function, body dehydration, and hemoconcentration leading to death.

• 한국패류학회지
• /
• 제24권1호
• /
• pp.1-10
• /
• 2008

Spermatogenesis and the reproductive cycle in male Spisula sachalinensis were investigated by cytological and histological observations. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves in that it contains a short midpiece with four mitochondria surrounding the centrioles. But spermatozoon of this species has not axial rod and satellite body in the midpiece. The morphologies of the sperm nucleus type and the acrosome shape of this species have a globe-shape type and modified cap-like shape, respectively. The spermatozoon is approximately $40-45{\mu}m$ in length including the sperm nucleus length (about $1.35{\mu}m$), acrosome length (about $1.50{\mu}m$) and tail flagellum. The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure. The spawning period of these species lasts from June to July, and the main spawning occurs in July when seawater temperatures are greater than $20^{\circ}C$. The male reproductive cycle of this species can be categorized into five successive stages: early active stage (October to January), late active stage (February to April), ripe stage (April to June), partially spawned stage (June and July), and spent/inactive stage (August to September).

• 대한한의진단학회지
• /
• 제19권2호
• /
• pp.101-108
• /
• 2015

Objectives This paper focused on developing the acupuncture-moxibustion device for head. Disadvantages of the existing devices for head moxibustion are its hume and inconvenience in operating because of the hair. Methods The proposed acupuncture-moxibustion device for GV20(Baihui) is 10mm long as needle body and 6mm long as needle root whose feature are 1~2 turns spiral coil. The spiral coil contains the moxa in order not to drop the moxa while operating Results The direct temperature on the burning moxa were measured by TK-305 infrared thermometer. But the direct temperature on the needle of acupuncture-moxibustion device were not able to measure by TK-305 infrared thermometer. By definition equation, the indirect temperatures on the needle of acupuncture-moxibustion device were able to be calculated. Conclusion A very safe, small and cheap acupuncture-moxibustion device for GV20(Baihui) of head is proposed. It will be useful to generate the heat shock protein and to operate in preventing and curing the Alzheimer's disease.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.238-244
• /
• 2008

A numerical and experimental studies are carried out to investigate the heat transfer characteristics of 5kWth dish-type solar air receiver. Measured solar radiation and temperatures at several different locations are used as boundary conditions for numerical simulation. Many parameters' effects (reflectivity of the reflector, the thermal conductivity of the receiver body, transmissivity of the quartz window, etc.) on the thermal performance are investigated. Discrete Transfer Method is used to calculate the radiation heat exchange in the receiver. A heat transfer model is developed and the rate of radiation, convection and conduction heat transfer are calculated. Using the numerical model, the heat transfer characteristics of volumetric air receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.43-46
• /
• 2003

Prediction of final microstructures after high temperature forming of Ti-6Al-4V alloy was attempted in this study. Using two typical microstructures, i.e., equiaxed and $Widmanst\ddot{a}tten$ microstructures, compression test was carried out up to the strain level of 0.6 at various temperatures $(700\~1100^{\circ}C)$ and strain rates $(10^{-4}\~10^2/s)$. From the flow stress-strain data, parameters such as strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equations for both microstructures. Then, finite element analysis was performed to predict the final microstructure of the deformed body, which was well accorded with the experimental results.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.149-154
• /
• 2015

Biometric techniques for authentication using body parts such as a fingerprint, face, iris, voice, finger-vein and also photoplethysmography have become increasingly important in the personal security field, including door access control, finance security, electronic passport, and mobile device. Finger-vein images are now used to human identification, however, difficulties in recognizing finger-vein images are caused by capturing under various conditions, such as different temperatures and illumination, and noise in the acquisition camera. The human photoplethysmography is also important signal for human identification. In this paper To increase the recognition rate, we develop camera based identification method by combining finger vein image and photoplethysmography signal. We use a compact CMOS camera with a penetrating infrared LED light source to acquire images of finger vein and photoplethysmography signal. In addition, we suggest a simple pattern matching method to reduce the calculation time for embedded environments. The experimental results show that our simple system has good results in terms of speed and accuracy for personal identification compared to the result of only finger vein images.