• Wind and Structures
• /
• v.12 no.4
• /
• pp.299-312
• /
• 2009

It has long been studied about the flow around bluff bodies, but the effect of aspect ratio on the sharp-edged bodies in thick turbulent boundary layers is still argued. The author investigates the flow characteristics around a series of rectangular bodies ($40^d{\times}80^w{\times}80^h$, $80^d{\times}80^w{\times}80^h$ and $160^d{\times}80^w{\times}80^h$ in mm) placed in a deep turbulent boundary layer. The study is aiming to identify the extant Reynolds number independence of the rectangular bodies and furthermore understand the surface pressure distribution around the bodies such as the suction pressure in the leading edge, when the shape of bodies is changed, responsible for producing extreme suction pressures around the bluff bodies. The experiments are carried out at three different Reynolds numbers, based on the velocity U at the body height h, of 24,000, 46,000 and 67,000, and large enough that the mean boundary layer flow is effectively Reynolds number independent. The experiment includes wind tunnel work with the velocity and surface pressure measurements. The results show that the generation of the deep turbulent boundary layer in the wind tunnel and the surface pressure around the bodies were all independent of Reynolds number and the longitudinal length, but highly dependent of the transverse width.

• Journal of the Korean Home Economics Association
• /
• v.40 no.3
• /
• pp.155-164
• /
• 2002

This study was conducted to investigate the differences in environmental and psychological factors in children with obesity and to offer useful information for obesity treatment and prevention. 123 children of 5-6th grade in elementary school and their mothers were included in this study and divided into either the obese group and normal group(obese group: 61, normal group: 62) according to the Weight-Length Index(WLI). Results showed that between the two groups there no significant differences in family income, mother's occupation status, educational level, and anthropometric measurement. Nutritional knowledge in the obese group was significantly higher than that of the normal group(p<0.05). The mothers of children with obesity had a higher level of nutritional knowledge than the mothers of normal children(p<0.05). There were no significant differences in food behavior between the obese and normal groups. There were no significant differences in maternal child-rearing practices and in maternal attitude on flood behavior of children. Considering psychological factors ; 72.1% of the children with obesity appraised their body image as obese(p<0.05), and 54.1% of the mothers in obese group perceived their child's body shape as obese(p<0.05). The level of self-esteem were not significantly different when compared between the obese and normal groups. From these results, it was suggested that effective measures for obesity treatment and prevention should include nutritional monitoring, and such efforts need to be maintained in order to help the obese children and their mothers.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• Child Health Nursing Research
• /
• v.28 no.1
• /
• pp.62-69
• /
• 2022

Purpose: This study explored the validity of a new type of thermometer and parent satisfaction with the new device. This 24-hour continuous monitoring smart wearable wireless thermometer (TempTraq^®) uses a very small semiconductor sensor with a thin patch-like shape. Methods: We obtained 397 sets of TempTraq^® axillary temperatures and tympanic temperatures from 44 pediatric patients. Agreement between the axillary and tympanic measurements, as well as the validity of the TempTraq^® axillary temperatures, were evaluated. Satisfaction surveys were completed by 41 caregivers after the measurements. Results: The TempTraq^® axillary temperatures demonstrated a strong positive correlation with the tympanic temperatures. The Bland-Altman plot and analysis of TempTraq^® axillary temperatures and tympanic temperatures showed that the mean difference was +0.45 ℃, the 95% limits of agreement were -0.57 to +1.46 ℃. Based on a tympanic temperature of 38 ℃, the results of validity of fever detection were sensitivity 0.85 and specificity 0.86. Satisfaction scores for TempTraq^® temperature measurement were all > 4 points (satisfactory). Conclusion: TempTraq^® smart axillary temperature measurement is an appropriate method for measuring children's temperatures since it was highly correlated to tympanic temperatures, had a reliable level of sensitivity and specificity, and could be used safely and conveniently.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.9
• /
• pp.1479-1490
• /
• 2010

This study provides basic data for the development of jacket patterns which reflect designs corresponding to the body shape features and preferences of obese women in their 20s and 30s by understanding problems they may encounter in wearing a ready-made jacket by researching the reality of ready-made tailored jacket wearing and their design preferences. A survey was conducted by sampling 82 obese women (over $25kg/m^2$ BMI) between the ages of 20 to 39. The details of the survey consists of general information, interest rate and importance rate on clothes, reality of wearing and purchasing jackets, measurement fits per each part, and preferred designs. SPSS 14.0 was used to analyze the data. The results showed that 76.8% of obese women wore their jackets less than 5 times a month. Those in the 20s wore the jackets more frequently than those in the 30s. The reasons for not wearing jackets frequently included uncomfortableness in activities and unavailability of the correct size. A total of 55% of the total preferred the fitting to be relatively smaller than the body size or tightly fitting. Although in the past, there was a tendency to wear a loose fit to cover the body shape, currently even obese body shapes avoided the loose fit as the tight fit is the trend. In terms of the satisfaction rate for the measurements per each part of jackets, there was a low satisfaction rate for most of the items. For the circumference items such as waist length and chest size, people responded that they were too small and for the length of items such as the length of jacket and sleeve length, people responded that they were too long. This was because the readymade clothes brands increase the length of items and circumference items in uniform in the same intervals when producing large sizes. Both those in the 20s and the 30s preferred a tight fit. In terms of preferred fabric, a wool/spandex mix was most popular and then cotton/spandex. This shows that they prefer those fabrics which allow an excellent activity while maintaining the exterior well. In addition, they preferred black color with no patterns because they wanted their body size to look reduced and did not want to receive any attention.

• Journal of Korean Medical classics
• /
• v.33 no.4
• /
• pp.1-19
• /
• 2020

Objectives : This paper aims to understand the meaning and utilitarian values of 'Jongyong(從容)' in medicine by studying its meaning in the 『Huangdineijing』. Methods : Examples of 'Jongyong(從容)' usages in Chinese literature and classical texts were studied first. Next, the similarities and characteristics of its contexts in discourses between Leigong and Huangdi were examined, followed by further examination of the overall meanings of the six chapters, 「Shicongronglunpian(示從容論篇)」, 「Zhuzhijiaolunpian(著至敎論篇)」, 「Shuwuguolunpian(疏五過論篇)」, 「Zhengsishilunpian(徵四失論篇)」, 「Yinyangleilunpian(陰陽類論篇)」, 「Jiejingweilunpian(解精微論篇)」 and the verses that include 'Jongyong(從容).' Results : Generally 'Jongyong(從容)' describes a resilient attitude that responds appropriately and calmly to difficult external situations while maintaining one's character, or refers to one's general behavior. In the 『Huangdineijing』, 'Jongyong(從容)' is only mentioned in discourses between Leigong and Huangdi, which talks about ancient East Asian clinical medicine in general, its transmission and education. Here, the meaning of 'Jongyong(從容)' could be summarized as an expansion of analogical thinking[引比類], medical work that involves the physician's commitment(人事), and detailed measurement of yinyang difference in the body(刑法, 陰陽, 治數). Discussion : In ancient East Asian medicine, the meaning of 'Jongyong(從容)' is closer to measurement of the yinyang difference rather than differentiation of the five element analogy. It is a medical practice that measures the shape, volume, length, area, height, concentration etc. of the human body in numerical figures to allow for the most subtle comparison, which was an important aspect of the physician's work that needed to be demonstrated, educated and transmitted to later generations to enable continuity of the medical profession.

• Journal of the Korean Society of Visualization
• /
• v.8 no.3
• /
• pp.41-48
• /
• 2010

A visualization study to evaluate bubble motion in a tab water filled cylindrical tank with a varying flow rate of compressed air is conducted. The flow rate of compressed air varies from 1 to 5 L/min. Time resolved images are acquired by a high speed camera in 10 bit gray level at 100 fps and the measurement volume is irradiated by a 230 W halogen lamp. It is observed that there are three different regions; the bubble formation region, the rising bubble region and the free surface region. During the rise of bubble, the shape is changed as if an elastic body. Based on the binarized bubble image, the mean diameters of rising bubbles are estimated at beneath of the free surface. As the gas flow rate increases, the mean diameter is increased and the rising velocity also increases with buoyancy force.

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.63-71
• /
• 1992

Generally, Web & Flange of I shape beam are composed of plane for optimization of measurement in investigating the behavior resistant to horizontal force and bending moment on large section Therefore, longitudinally traperzoidal web section beam has an important function as a body for carrying more load and ensuring more support area. There is only a limited usefulness for analyzing the behavior of web section with opening. It is experimentally verified that this traperzoidal web section has a good resistant caopacity. conclustions on the above research results are as follows : 1) resistant capacity on the above can be more 15% increased than normal case 2) stiffener welding work and complexity of shopdrawing can be excluded in advance 3) traperzoidal section can be applied in structural practice.

• Journal of the Korean Society of Visualization
• /
• v.10 no.3
• /
• pp.11-15
• /
• 2012

Inertial migration phenomena of phytoplankton in pipe flows were investigated using a digital holography technique. As the Reynolds number increases, the microorganisms suspended in a pipe flow are focused at a certain radial position which is called equilibrium position or pinch point. In this study, the effects of the size of microorganism and Reynolds number in the range of 1 < Re < 78 on the inertial migration were investigated and the results are compared with those for solid particles under similar experimental conditions. As a result, the equilibrium position for the elastic microorganisms is not so distinct, compared to the solid particles. This results from deformation of elastic body shape caused by shear-gradient of surrounding flow.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.68-74
• /
• 1998

The ESPI(Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique that allows static and dynamic deformation analysis and surface shape measurements of engineering structures. e .g. turbine blades. vehicle engine components, body panels, etc. This technique is very similar to holographic interferometry, but uses a solid static camera and an image processing board for recording and digital processing of speckle patterns. In this paper it is presented that FEM results for the free vibration of symmetrically laminated composite as [30/-30/90]s. The natural frequencies of laminated composite rectangular plates having the particular boundary condition are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculation by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.