• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.18-26
• /
• 1993

When designing workplaces, controls should be placed within the reach of operator's arm or foot to guarantee effective performance. The aviation industry is perhaps the chief user of anthropometric data for its need to weight minimization and space optimization. In designing a workplace which must cater to a wide range of operator size, it might be sufficient to plan only for the 'average person'. Static arm reach measurements which are taken in conventional, standardized positions provide the necessary information, but they cannot be directly applied to dynamic situations. In this research, an approximate algorithm to generate the workspace of the human body including foot reach and trunk motion is proposed and tested. The robot kinematics was employed to represent the human body as a multi-link system.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.1
• /
• pp.17-22
• /
• 2013

Lesser toe deformities such as mallet toe, hammer toe and claw toe are annoying problems not only to patients but also to orthopaedic surgeons because they are not easy to manage or treat. Though they occupy very small portion in whole body, they are notorious for unpredictable surgical results. It can make clinical results better to understand these deformities more comprehensively and to make strategic surgical plan for each target deformity.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.15 no.1
• /
• pp.7-9
• /
• 1978

In this calculation of statical stability of a ship, mechanical integrator was used most popularly and the direct calculation method such as a Barn's wedge method was also adopted in some cases. Both of the above method was developed for manual calculation which include mechanical integration or drafting procedure on body plan. Therefore, the computerization of stability calculation by the above method is very difficult. In this paper a simplified method for stability calculation is suggested, with based on hydrostatic data and immerged wedged characteristics.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.41-52
• /
• 2020

Purpose: To find out the dosimetric usefulness, setup reproducibility and efficiency of applying 3D Bolus by comparing two treatment plans in which Commercial Bolus and 3D Bolus produced by 3D Printing Technology were applied to the neck during VMAT treatment of Hypopahrynx Cancer to evaluate the clinical applicability. Materials and Methods: Based on the CT image of the RANDO phantom to which CB was applied, 3D Bolus were fabricated in the same form. 3D Bolus was printed with a polyurethane acrylate resin with a density of 1.2g/㎤ through the SLA technique using OMG SLA 660 Printer and MaterializeMagics software. Based on two CT images using CB and 3D Bolus, a treatment plan was established assuming VMAT treatment of Hypopharynx Cancer. CBCT images were obtained for each of the two established treatment plans 18 times, and the treatment efficiency was evaluated by measuring the setup time each time. Based on the obtained CBCT image, the adaptive plan was performed through Pinnacle, a computerized treatment planning system, to evaluate target, normal organ dose evaluation, and changes in bolus volume. Results: The setup time for each treatment plan was reduced by an average of 28 sec in the 3D Bolus treatment plan compared to the CB treatment plan. The Bolus Volume change during the pretreatment period was 86.1±2.70㎤ in 83.9㎤ of CB Initial Plan and 99.8±0.46㎤ in 92.2㎤ of 3D Bolus Initial Plan. The change in CTV Min Value was 167.4±19.38cGy in CB Initial Plan 191.6cGy and 149.5±18.27cGy in 3D Bolus Initial Plan 167.3cGy. The change in CTV Mean Value was 228.3±0.38cGy in CB Initial Plan 227.1cGy and 227.7±0.30cGy in 3D Bolus Initial Plan 225.9cGy. The change in PTV Min Value was 74.9±19.47cGy in CB Initial Plan 128.5cGy and 83.2±12.92cGy in 3D Bolus Initial Plan 139.9cGy. The change in PTV Mean Value was 226.2±0.83cGy in CB Initial Plan 225.4cGy and 225.8±0.33cGy in 3D Bolus Initial Plan 224.1cGy. The maximum value for the normal organ spinal cord was the same as 135.6cGy on average each time. Conclusion: From the experimental results of this paper, it was found that the application of 3D Bolus to the irregular body surface is more dosimetrically useful than the application of Commercial Bolus, and the setup reproducibility and efficiency are excellent. If further case studies along with research on the diversity of 3D printing materials are conducted in the future, the application of 3D Bolus in the field of radiation therapy is expected to proceed more actively.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.1 s.12
• /
• pp.51-56
• /
• 2004

In this study, the variation of water quality in Osan stream was investigated through continuous monitoring, and mass balance and metabolism occurred into water body were estimated to set up effective management plan for water quality of small urban stream. From the results of continuos investigation of water quality in Osan stream, the things written as follows must be previously done to improve water quality of main stream. Firstly, it need that effective management plan for tributaries must be set up to improve the water quality in main stream. Secondly, the counter plan for re-eruption of pollutants from sediment in main-stream is required to prevent inner pollution. In this study, we showed that small urban stream can be managed effectively by simple investigation to prevent deterioration of water quality. Therefore continuous monitoring for water quality in stream is important to improve water quality, furthermore matter cycle and mass balance happening in the stream environment must be correctly estimated to make up healthy stream environment.

• Radiation Oncology Journal
• /
• v.30 no.3
• /
• pp.146-151
• /
• 2012

Purpose: This treatment planning study was undertaken to evaluate the impact of beam angle configuration of intensity-modulated radiotherapy (IMRT) on the dose of the normal liver in hepatocellular carcinoma (HCC). Materials and Methods: The computed tomography datasets of 25 patients treated with IMRT for HCC were selected. Two IMRT plans using five beams were made in each patient; beams with equidistance of $72^{\circ}$ (Plan I), and beams with a $30^{\circ}$ angle of separation entering the body near the tumor (Plan II). Both plans were generated using the same constraints in each patient. Conformity index (CI), homogeneity index (HI), gamma index, mean dose of the normal liver (Dmean_NL), Dmean_NL difference between the two plans, and percentage normal liver volumes receiving at least 10, 20, and 30 Gy (V10, V20, and V30) were evaluated and compared. Results: Dmean_NL, V10, and V20 were significantly better for Plan II. The Dmean_NL was significantly lower for peripheral (p = 0.001) and central tumors (p = 0.034). Dmean_NL differences between the two plans increased in proportion to gross tumor volume to normal liver volume ratios (p = 0.002). CI, HI, and gamma indices were not significantly different for the two plans. Conclusion: The IMRT plan based on beams with narrow separations reduced the irradiated dose of the normal liver, which would allow radiation dose escalation for HCC.

• Ocean and Polar Research
• /
• v.37 no.2
• /
• pp.119-125
• /
• 2015

This paper focuses on the efficient arrangement plan of buoyancy modules, which plan is used to secure the safe operation and structural stability of a marine riser. The marine riser is connected between a vessel and seabed devices. The movement of the vessel and the seabed devices are affected by the motion of the riser. The riser of a deep-seabed integrated mining system exerts a strong influence on the healthy transfer of minerals. So, buoyancy modules must be equipped to compensate for the problem which is the structure stability and the dynamic motion. Installation locations and quantities of the buoyancy modules are determined by real sea experiments. But this is not easy to do because in real sea experimental conditions the cost is expensive as well as being, time-consuming and dangerous. Therefore, the locations and quantities should be determined by numerical simulation. This method is called simulation-based design. The dynamic analysis models of the riser and the buoyancy modules are built into the commercial software of DAFUL.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.40-44
• /
• 2006

This study is on the brassiere of reduce clothing pressure. To set the measurements of bras for women in their 20s, considering the comfortableness in wearing and tightness, this paper conducted a questionnaire survey concerning breasts and bras as well as measurements of body and contact surface pressure. As a result of comparing the discrepancies between the lower chest circumferences of the body and the bra, it was revealed that 67.0% were wearing one that was bigger than the body size. Most of them mentioned 'feeling of tightness' as a reason(60.4%), which suggests there are problems of the total length and elasticity in the process of making bras. The favorite bra types are wire type(57.9%), mold type(24.3%), and strapless type(10.4%).it is recommended that the total length of lower chest circumference be increased. The result and the recommendations of this study are as follows: First, the total length of brassiere be increased by 5cm from the current patterns in the process of manufacturing. Second, elasticity of the lower-side tapes be extended from 120% to 170%.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.17-25
• /
• 2018

Purpose : To compare the radiation doses of prostate cancer patients according to changes in abdominal body shape and energy during Volumetric modulated arc therapy(VMAT). Materials and Methods : Seven patients with prostate cancer were enrolled in this study. VMAT treatment plan was established at 6, 10, and 15 MV while changing from -2.0 cm to 2 cm by 0.5 cm. Conformal index(CI), homogeneous index(HI), $D_{max}$, $D_{95%}$, $D_{50%}$ and $D_{2%}$ of PTV were examined in order to evaluate the change of dose in the target organ according to body shape change. Normal organ of the femoral head, rectum and bladder was analyzed to evaluate dose changes. Results : The dose of $D_{max}$ 6 MV in PTV increased to 107.2 % in 1.0 cm body shape reduction, and 10 MV and 15 MV dose increased to 107.1 % and 107.0 % in 1.5 cm body reduction, respectively. The dose of $D_{50%}$ 6 MV in PTV decreased to 99.64 % in 1.0 cm body shape increase, and in 10 MV and 15 MV dose decreased to 99.79 % and 99.97 % in 1.5 cm body increase, respectively. In 2.0 cm body type increase, the dose was decreased to 99.30 % and 99.52 %, respectively. Doses for rectum and bladder gradually increased with decreasing weight, and dose decreased with decreasing weight. 6 MV, and $V_{70Gy}$ at 10 MV increased from 11.50 % to 12.76 % when the external shape decreased by 2.0 cm. The bladder $V_{70Gy}$ also increased from 14.0 % to 15.2 %. It was also shown that the dose increased as the body weight decreased in the femoral head. Conclusion : In the treatment of VMAT, dose distribution can be changed according to the change of abdominal shape. SSD and CBCT were used to decrease the body shape by more than 1cm or more than 1.0 cm at 6 MV and the body shape by more than 1.5 cm or more than 1.5 cm at 10 MV or 15 MV. It is considered that a new treatment plan should be established through re-simulation.

• Research in Community and Public Health Nursing
• /
• v.19 no.3
• /
• pp.431-442
• /
• 2008

Purpose: The Purpose of this study was to examine the degree of obesity stress and analyze factors having an effect on obesity stress among college women. Method: The subjects were 347 female students from a university in J City. Data were collected using a self-report questionnaire for general characteristics, health-related characteristics, and current and preferred somatotype. Obesity stress was measured using 10 items developed by Cho (1996) based on Body Attitudes questionnaire (BAQ) of Ben-Tovim and Walker (1991). The survey was conducted from September 4 to September 7, 2007. Data were analyzed by t-test, ANOVA, Scheffe test, Spearman's rank correlation test, and stepwise multiple regression using SPSS 14.0. Results: The average score of obesity stress was $2.78{\pm}0.90$ out of 5.00. Stepwise multiple regression analysis showed that the major factors that affect obesity stress of female college students were perceived body shape, disagreement between current and preferred somatotype, history of weight control, body mass index (BMI), and perceived health status, and these factors explained 38.4% of obesity stress. Conclusion: Subjective judgment in the perception of or preference for body shape was the most important factor affecting obesity stress in female college students. Therefore, a plan is necessary to mitigate obesity stress and evaluate individually subjects who perceive themselves to be fat or want to be thinner than the current somatotype. And consultation and constant management are needed to help the high risk group (experience of weight control, BMI ${\geq}23kg/m^2$, not good health status).