• 제목/요약/키워드: Body Movement

검색결과 1,535건 처리시간 0.03초

Measurement of Variation in Water Equivalent Path Length by Respiratory Organ Movement

  • Minohara, Shinichi;Kanai, Tatsuaki;Endo, Masahiro;Kato, Hirotoshi;Miyamoto, Tadaaki;Tsujii, Hirohiko
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.90-93
    • /
    • 2002
  • In particle radiotherapy, a shape of the beam to conform the irradiation field is statically defined by the compensator, collimator and potal devices at the outside of the patient body. However the target such as lung or liver cancer moves along with respiration. This increases the irradiated volume of normal tissue. Prior discussions about organ motions along with respiration have been mainly focused on inferior-superior movement that was usually perpendicular to beam axis. On the other hand, the change of the target depth along the beam axis is very important especially in particle radiotherapy, because the range end of beam (Bragg peak) is so sharp as to be matched to distal edge of the target. In treatment planning, the range of the particle beam inside the body is calculated using a calibration curve relating CT number and water equivalent path length (WEL) to correct the inhomogeneities of tissues. The variation in CT number along the beam path would cause the uncertainties of range calculation at treatment planning for particle radiotherapy. To estimate the uncertainties of the range calculation associated with patient breathing, we proposed the method using sequential CT images with respiration waveform, and analyzed organ motions and WELs at patients that had lung or liver cancer. The variation of the depth along the beam path was presented in WEL rather than geometrical length. In analyzed cases, WELs around the diaphragm were remarkably changed depending on the respiration, and the magnitude of these WEL variations was almost comparable to inferior-superior movement of diaphragm. The variation of WEL around the lung was influenced by heartbeat.

  • PDF

공중으로 점프한 차량의 최대 높이 및 속도 (Maximum Height and Velocity of Jumping Car in The Air)

  • 신성윤;이현창
    • 한국컴퓨터정보학회논문지
    • /
    • 제17권10호
    • /
    • pp.55-60
    • /
    • 2012
  • 자유 낙하하는 물체가 받는 힘은 중력뿐이다. 우리는 중력만을 받아서 운동하는 것을 자유 낙하 운동이라고 하고 자유 낙하하는 물체를 자유낙체라 한다. 즉, 자유낙체란 물체의 초기 운동 상태와 무관하게 중력의 영향으로만 자유롭게 낙하하는 물체를 말하는 것이다. 본 논문에서는 공기의 저항을 무시하고, 수직방향으로 짧은 거리의 범위내에서 고도에 의한 자유낙하 가속도의 변화가 없다는 가정을 한다. 이러한 가정 하에서 자동차가 수직 상 방향으로 도약하여 최고점에 도달하는 시간, 최대높이, 자동차가 출발 위치로 돌아오는 시간과 자동차의 속도, 자동차가 땅에 떨어질 때의 시간 및 속도에 대해 알 수 있다. 이는 텔레매틱스에서 자동차나 오토바이가 도약하는 정도와 사고의 위험을 측정할 수 있다.

엉덩관절 굽힘근 유연성이 컨벤셔널 데드리프트 동작 수행에 미치는 영향 (The Effect of Hip Flexor Flexibility on Performing the Conventional Deadlift)

  • Ji, Young Sung;Yoon, Sukhoon
    • 한국운동역학회지
    • /
    • 제30권3호
    • /
    • pp.275-283
    • /
    • 2020
  • Objective: The purpose of this study was to investigate the effect pf flexibility of hip flexor muscles on a conventional deadlift movement. Method: Eighteen healthy male were participated in this study and were divided into normal group (NG: age: 24.0±1.8 yrs, height: 174.5±2.37 cm, body mass: 74.4±5.5 kg, 1RM: 138.0±23.8 kg) and restricted group (RG: age: 24.6±1.7 yrs, height: 171.5±5.3 cm, body mass: 74.0±5.7 kg, 1RM: 137.5±18.3 kg) by Thomas test, which measure flexibility of hip flexor muscles. A 3-dimensional motion analysis with 8 infrared cameras and 3 channels of EMG was performed in this study. A two-way ANOVA (group x load) with repeated measure was used for statistical verification. The significant level was set at α=.05. Results: RG revealed significantly increased muscle activation in erector spinae on 70% and 90% of 1RM and decreased muscle activation in gluteus maximus on 90% of 1RM compared to NG (p<.05). For the muscle activation ratio for agonist to synergist, erector spinae showed the difference in 90% of 1RM while hamstring was observed differences in all loads (p<.05). Conclusion: Our results indicated that hip flexibility affects conventional deadlift movement. Therefore, it is necessary to assess the flexibility of the hip flexor muscles before performing the movement and, as needed, to train to address the lack of flexibility.

형기(形氣)의 개념으로 이해한 체질치료 연구 (A Study on Constitution Therapy Based on Hyeong-Gi Concept)

  • 정희석;김도훈
    • 대한한의학원전학회지
    • /
    • 제28권2호
    • /
    • pp.67-85
    • /
    • 2015
  • Objectives : To find appropriate constitutional therapy by understanding Hyeong and Gi from the perspective that "Gi is inner position, and Hyeong is outer position, and Yang converts to Gi, Eum makes Hyeong(氣裏形表, 陽化氣 陰成形)". Methods : 1. Defined Hyeong(形)and Gi(氣)and studied Wonhyeong(圓形) and Banghyeong(方形), the shapes that are formed as a result of Gi-movement. 2. Used 'Hyeong-Gi' concept to analyze physiological and pathological phenomena; classifies parts of the body into Sasang by extrapolating from WonBang concept; and studied Sasangchejil. 3. Based on the above 1 and 2, studied medical direction of Sasangchejil written in Hwangjenaegyeongsomun Tongcheon Results : 1. Wonhyeong is the result of Yang(陽) movement, whereas Banghyeong is the result of Eum (陰) movement. 2. Hyeong(body) can be classified into Won(圓, circle) and Bang(方, square) or more specifically into Won of Won, Bang of Won, Won of Bang, Bang of Bang. Each corresponds to Taeyang(太陽), Soyang(少陽), Taeeum(太陰), and Soeum(少陰). 3. The constitutional therapy can be formulated by refering to "Tongcheon(通天)" and by taking into consideration that each Sasang constitution has a bias toward Mok(木), Hwa(火,) Gum(金), Su(水). Conclusions : Basic treatment for round shaped people needs to be focused on a cure of Boeum(補陰) and Bojeong(補精), whereas for angular shaped people, treatment should be about Bogi(補氣) and Boyang(補陽). Treatment for Taeyangin(太陽人) should be about strengthening Ganeum(肝陰) and reducing Paeyang(肺陽) and for Soyangin(少陽人), the treatment needs to be strengthening Sineum(腎陰) and diminish Biyang(脾陽). Taeeumin(太陰人) should receive a cure that reinforces Pyeyang(肺陽) and brings Ganeum(肝陰) down, whereas Soeumin(少陰人) should have a cure that strengthens Gi and increases Yang.

슬랙스 대퇴부 둘레와 허리선 위치에 따른 동작기능성 (The Moving Function for Slacks Related to Thigh Circumference and Crotch Length)

  • 연지연;권수애
    • 한국생활과학회지
    • /
    • 제8권3호
    • /
    • pp.551-563
    • /
    • 1999
  • In this study, university students were allowed to wear the slacks varying the thigh circumference(slim/straight type) and crotch length(long, middle, short crotch type). Tightness and uncomfortability for each slacks were measured to be expressed 5point-likert type. The results can be summarized as follows: 1. At the research for measuring uncomfortability, measures of slim types and straight types of thigh circumference, crotch length B and C, and the body movement such as sitting down on the chair, sitting down with their body curling like a ball, and getting down on their knees were higher in slim types than in straight types. 2. Only crotch length C had different measures between these two types in tightness. 3. In uncomfortability, each of them had different measures among three kinds of crotch length and two types of thigh circumference had different measures among three kinds of crotch length. Four kinds of movement had different measures among three kinds of crotch length in uncomfortability. While uncomfortability of crotch length B was the highest one, that of crotch length A was the lowest one. 4. In tightness, each of them had different measures among three kinds of crotch length. While tightness of crotch length C was the highest one, that of crotch length A was the lowest one. Four kinds of movement had different measures among three kinds of crotch length in tightness.

  • PDF

에어로빅복의 유니버설 디자인을 위한 동작 적합성 평가 (An Evaluation of Aerobic Exercise Wear Mobility as a Basic Criterion for Universal Design)

  • 손주희;최정화;강태진
    • 한국의류학회지
    • /
    • 제31권3호
    • /
    • pp.343-350
    • /
    • 2007
  • This study compared and studied the clothing mobility of two types of aerobic clothes - those made of currently popular stretch materials and those made of new stretch materials that were specially developed for this study. The focus of the comparison was on the range of joint movement during activity, and the physiological burden imposed on the body by the clothes. In total, 18 experiments were carried out under controlled conditions in an artificial climatic chamber with a temperature of $25{\pm}1^{\circ}C$, air humidity of $60{\pm}5^{\circ}C$ and negligible air movement. Each exercise program consisted of a 30-minute of aerobic workout and a 20-minute rest following the exercise. Measurements were taken to determine the following: physiological reactions (whole-body and local sweat rates), subjective sensations(of temperature, humidity, comfort, tightness, and clothing wetness), joint angle(measured with a goniometer), and so on. The results of the study us as follows: Material B excels in clothing mobility. Material C excels in sweat absorbency and drying speed. Material A was found to be the hottest material, while material C was found to be slightly hot through the analysis of the change in pre- and post-exercise bodyweight(= amount of sweat). Regarding the amount of evaporated sweat, material A>material C>material B. Material B produced the smallest amount of evaporated sweat. The wider the range of joint movement, the smaller the amount of sweat and the lower the average skin temperature.

중년 여성을 위한 한복 저고리의 체형별 원형 연구 (A study model standardization by he body types of Jugori of Hanbok for middle-aged women)

  • 진현선;권미정
    • 한국의상디자인학회지
    • /
    • 제5권1호
    • /
    • pp.13-24
    • /
    • 2003
  • The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

  • PDF

『황금용』(The Golden Dragon) 역할창조 연구 - LMA를 적용한 프로덕션 과정을 중심으로 - (A Study on the Creating Roles in The Golden Dragon - Focused on Production Processes with LMA -)

  • 정인영;조준희
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제14권8호
    • /
    • pp.117-130
    • /
    • 2020
  • 『황금용』(The Golden Dragon)은 아시아계 노동자들의 낯선 도시 베를린에서의 생존에 관한 이야기를 통해 세계화의 비극적 허상에 대해 다시 생각해보게 하는 작품이다. 이 작품의 포스트 서사극적 특성은 관객에게 이전과 다른 새로운 방식으로 관극할 것을 요구한다. 하지만 국내에서는 포스트 서사극적 특성과 포스트 서사극의 개념에 관한 이론적 연구는 진행되었으나 구체적인 연기적 접근 방법 연구는 거의 전무하다. 따라서 본 연구자는 연기적 접근 방법을 제시하기 위하여 먼저 『황금용』의 포스트 서사극적 특성을 분석하였다. 그 결과 포스트 서사극에서는 사실주의 연극과는 다른 일인다역을 실행하기 위한 신체중심의 연기 접근법이 요구됨을 확인하였다. 따라서 루돌프 본 라반(Rudolf von Laban)의 라반 움직임 분석(Laban Movement Analysis)을 적용하여, 몸의 활용을 통해 자연스럽게 내적 충동이 유발될 수 있도록 실행하였다. 특히 라반의 움직임의 네 가지 카테고리(BESS) 중 에포트를 통해 포스트 서사극을 연기하기 위한 신체 중심의 연기적 접근 방법을 고찰하고자 한다. 최종적으로 실제 프로덕션 과정을 통해 라반의 움직임 이론이 포스트 서사극의 역할 창조를 위한 신체 중심의 연기적 접근 방법으로 활용될 수 있음을 확인하였다.

Pb(Sn1/2Sb1/2)O3-PbTiO3계 소결체의 직경변화가 공진 및 필터특성에 미치는 영향 (Effect of Size of Sintered Body on Resonant and Filter Characteristics in Pb(Sn1/2Sb1/2)O3-PbTiO3 Piezoelectric Ceramics)

  • 임진호;조상희
    • 한국세라믹학회지
    • /
    • 제25권4호
    • /
    • pp.309-314
    • /
    • 1988
  • In this study, the effect of the size of sintered body on resonant and filter characteristics in Pb(Sn1/2Sb1/2)O3-PbTiO3 piezo-electric system were investigated. The attenuation characteristics of ring-dot type and ladder type filter were also investigated. As the size of sintered body was decreased, the resonant characteristic(Fr, Fa) and the center frequency(Fo) were increased. As the poling field was increased, the Kp and bandwidth were increased. The big difference between rign-dot type and ladder type was the sharpness of bandwidth, selectivity and the movement of center frequency.

  • PDF

3축 이송용 로봇의 동적 해석 (Dynamic Analysis of a Three-Axis Mechanism for Transfer Robots)

  • 이석영
    • 에너지공학
    • /
    • 제24권3호
    • /
    • pp.128-134
    • /
    • 2015
  • 본 연구는 연성체와 강체로 구성된 다물체 시스템을 분석한 것이다. 이송용 로봇은 주로 빠른 속도와 넓은 범위의 이동거리의 장점으로 무거운 부품으로 구성된 자동화산업에 사용된다. 주로 3축으로 구성되어 사용되는 이송용 로봇은 커다란 부하를 담당하기 위해 최근에 강도와 강성을 고려하여 개발되어진다. 따라서, 이러한 목적으로 과도모드가 적용된 동적해석을 수행하여 어느 시간과 위치에서 항복되는지 찾기 위해 수행되었다. 이러한 연구의 결과로 로봇의 응력과 변형량을 분석할 수 있었다.