• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.102-108
• /
• 2004

The anthropometric measurement and the photometric measurement for have been conducted 358 children from 4 years old to 6 years old to design children's clothing. The characteristics of body type were grasped among total 44 measurement items according to the aging, being extracted seven factors from factor analysis. From cluster analysis among the seven factors the three body types were classified. Type 1 shows low fat body with a small figure and short upper body. The body has a round belly and waist. Type 2 shows the fattest body with an average height. The body has been backed with lower shoulders. Type 3 shows common fat body with a high height and a big figure. The body shows crooked round back with a big upper body and rising shoulders.

• The Research Journal of the Costume Culture
• /
• v.2 no.1
• /
• pp.29-38
• /
• 1994

This research has been to perform with various methods of measurement of human body. As experiment methods, performed the body measurement method with Martin's measurer, took pictures for he observation of body gesture and body shape, and applied the cross-section measurement method of each body part for the making of body pivot. In the making of body pivot. used several sheets of styroform, and attached some gypsum power on the surface of the body pivot for he body silhouette of body. Eventhough, there were not enough subjects for this study, these methods will be continuously conducted with enough subjects, there will be to develop the body measurement method for Korean women, and will find to solve a suitable manufacturing body and the study of body for Korean women.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2023

The purpose of this study was to characterize the upper body shape of men in their 50s and 60s by analyzing direct measurement data. Sixty one direct measurement items were analyzed. Subjects (n = 752) were classified based on 5 factors into 4 body types. In order to acquire accurate upper body shape information by analyzing body type using the 8th Size Korea direct measurement data, body shapes were classified through factor and cluster analysis. As a result of the comparative analysis of the upper body measurements from the 5th to the 8th Size Korea measurement, it was found that waist circumference item tended to increase significantly from the 5th Size Korea measurements. The upper body type of middle aged males were classified using five factors: the trunk obesity factor, the trunk vertical factor, the width of the back shoulder, the vertical factor behind the back, and the length factor of the upper body. Middle-aged men were classified into four body types through cluster analysis. Type 1 is relatively short with big arms, Type 2 has wide shoulders and thin arms, and in Type 3, the upper body is relatively long. Type 4 is the most obese upper body.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.43-52
• /
• 1989

This study deals with the standardization of anthropometric terms related to body measurement points and lines that are to be the basis in body measurement. It investigates the state-of-the art of anthropometric terms used among middle and high schools, universities, dressmaking schools, and experts and set up the directions of standardization. According to the directions, 39 body measurement points and 9 body measurement lines were studied and a draft standards on anthropometric terms was suggested.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.243-248
• /
• 2006

The purpose of this study is to design a body-fat measurable electronic scale which can measure body impedance and weight. The hardware configuration of this system for the body-fat measurement includes a sinewave constant current generator, a analog switch circuit and a microprocessor with peripheral interface as well as electronic scale circuit. And the dedicated software is also designed for calculating body fat and body composition analysis from the result of the measurement.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.88-99
• /
• 2003

The body changes of the elderly women are the forward tilt of the neck and shoulder point shrinkage of the spinal column, and protrusive abdomen. Unfortunately, few data based on body measurements for elderly women existed and a few studies are limited to the body figure of the elderly women. If these changes are not applied to the manufacturing of the clothing, almost of the elderly women will be unfitted with their clothing. So to improve the fitting of the elderly women, it is necessary to use the standard size systems for elderly women. This report is the first study to develop the standard tables of body measurements to be used for improving the fit of garments and patterns for women aged 60 and older. This study drew from anthropometric measurements of 337 and photographic measurements of 276 women aged 60 and older. It described the protocol of anthropometric measurement, the comparison between the measured data and the data on which National anthropometric survey of Korea 1997 is based, and the development of body measurement standard tables for elderly women. And we also considered the regional difference of body dimensions in order to develop the national size standards for elderly women. Further study would include the classification of body dimensions and description of each figure type for sizing apparel of women aged 60 and older.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.895-906
• /
• 2000

The study planned to testify the accuracy of the 3D scanner through analyzing the human body measurement method and the evaluation of flare skirt with 3D scanner. The results obtained from this study were as follows; First, the results of measurement for the dress form and human body by 3D scanner were more accurate than one or two dimensional measurement method. Second, from the results of the scan for the flare skirts as worn the human body, we could obtain very accurate horizontal section map. Third, in the clothing ergonomics viewpoint, the accuracy of the 3D scanner was very excellent and its utility was higher than that of the moir photography method. Therefore, the 3D scanner is very useful for the human body measurement and the wearing evaluation. In a nutshell, this study illustrates that we have to develop a program of automatic human body measurement system which will enhance the application of the 3D scanner.

• The Research Journal of the Costume Culture
• /
• v.6 no.2
• /
• pp.141-152
• /
• 1998

In the result of classification body types for 100 adult women by direct measurements and antropometric measurements, the mean of weight is bigger than he mean of weight of 97'. So modern 20's women is more than than 94'. In the result of factor analysis, 5 factors were extracted (horizontal sizes, vertical sizes, and degree of shoulder) from exponent sizes of the antropometric measurements item, and another 5 factors were extracted (thick of body, horizontal form of the torso, silhouette of the torso, and size of abdomen) from direct measurements item. The body types are classified into 4 types by cluster analysis in the result of direct measurement item, and another body types are classified into 5 types by antropometric measurement item, it was classified into the horizontal size and the shape and silhouette of torso, and by direct measurement item, it was only classified into the vertical and horizontal size. So for the patternmaking of clothing, it is more adoptable the classification of body by antropometric measurement item than direct measurement item.