• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.786-791
• /
• 2007

Statistical differences between men and women are investigated for a total of eleven joint motions during level walking. Human locomotion which exhibits nonlinear dynamical behaviors is quantified by the chaos analysis. Time series of joint motions was obtained from gait experiments with ten young males and ten young females. Body motions were captured using eight video cameras, and the corresponding angular displacements of the neck and the upper body and lower extremity were computed by motion analysis software. The maximal Lyapunov exponents for eleven joints were calculated from attractors constructed and then were analyzed statistically by one-way ANOVA test to find any difference between the genders. This study shows that sexual differences in joint motions were statistically significant at the shoulder, knee and hip joints.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.8 no.2
• /
• pp.75-86
• /
• 2004

In this study, a recursive algorithm for generating the equations of motion of a chain of rigid rods is presented. The methods rests upon the idea of replacing the rigid body by a dynamically equivalent constrained system of particles. The concepts of linear and angular momentums are used to generate the rigid body equations of motion without either introducing any rotational coordinates or the corresponding transformation matrices. For open-chain, the equations of motion are generated recursively along the serial chains. For closed-chain, the system is transformed to open-chain by cutting suitable kinematic joints with the addition of cut-joints kinematic constraints. An example of a closed-chain of rigid rods is chosen to demonstrate the generality and simplicity of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2339-2348
• /
• 1994

The objective of this paper is to develop a solution method for the differential-algebraic equation(DAE) derived from constrained muti-body dynamic systems. Mechanical systems are often modeled as bodies and joints. Differential equations of motion are formulated for bodies. Since the bodies are connected by joint, the differential variables must satisfy the kinematic constraint equations that come from the joints. Difficulties are arised due to drift of the differential variables off the constraint equations. An optimization method is adopted to correct the drift of the differential variables. To demonstrate the efficiency of the proposed method a slider-crank mechanism is analyzed dynamically. Identical results are obtained as these from the commercial program DADS. Dynamic analysis of a High Mobility Multi-purpose Wheeled. Vehicle(HMMWV) is carried out to show the practicalism of the proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.2 s.191
• /
• pp.64-72
• /
• 2007

Many human-body motions such as walking, running, jumping, etc. require a significant amount of power. To achieve a high power-to-weight ratio of the humanoid robot system, this paper proposes a new design of the bio-mimetic leg mechanism resembling musculoskeletal system of the human body. The hip joints of the system considered here are powered by 5 human-like bi-and mono-articular muscles, and the joints of knee and ankle are redundantly actuated by both bi-articular muscles and joint actuators. The kinematics for the leg mechanism is derived and a kinematic index to measure force transmission ratio is introduced. It is demonstrated through simulation that incorporation of redundant muscles into the leg mechanism enhances the power of the mechanism approximately 2 times of the minimum actuation.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.333-342
• /
• 2010

This paper describes a novel quantitative discomfort evaluation method based on motion data and its application to discomfort analysis of ingress/egress motions for cars. To develop the discomfort evaluation model, we introduced the discomfort regression curve and the range of motion for each degree-of-freedom of the joints of a whole human body. The maximum discomfort value for the joints at a specific time is selected to represent the discomfort value of the whole body at the time. The results of the experiments and questionnaires support the claim that our discomfort measure matches experimental subjective discomfort levels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.114-123
• /
• 2007

We are going to propose equations for stable static and endurance strength design of driveshafts. It is very important to decide the contact normal stress of internal components of CV joints. We can estimate the strength, torque capacity, endurance life of CV joints from contact normal stress by presented equation in this paper. Besides it can be shown the equation for shaft design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.121-133
• /
• 2008

We presented design methodology of constant velocity joint for passenger cars using design of experiment. On the basis of contact normal stress of internal components of constant velocity joints, we performed a sensitivity analysis of several design parameters. And then we performed robust design and optimization design process. As a result, we could find robust design and also propose the optimized design. Presented design process would be very helpful for engineers who are suffer for new constant velocity joint design.

• 연구논문집
• /
• s.22
• /
• pp.21-26
• /
• 1992

Dynamic analysis is important in structural design of SCARA or articulated type industrial robots and is' usually done to main three axes. In this paper, robot arm dynamics was analyzed using FBD(free body diagram). Though the proposed scheme becomes complex as DOF(degree of freedom)increases, it allows to see types and directions of forces and moments acting on the body. Therefore, the strength analysis of robot arm can be done relatively easy in a case of either closed or open loop chain. This method can be used for obtaining dynamic simulation at off-line programming system and calculating required torques at joints at on-line system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.532-533
• /
• 2011

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.513-518
• /
• 2016

The Mechanisms of whole body vibration on the human body is not clearly presented despite of the research result and there is not enough research that shows the effects of vibration on the kinetic changes of the lower joint. Therefore, this study focuses on finding out which lower joint is related with kinetic vertical jump ability. Five male and five female who didn't have orthopedic history were selected as the subjects. The subjects carried out three squat jumps before and after 5minutes of 30Hz whole body vibration. We have utilized a 3D motion analysis system to analyze the kinetic changes of the lower joint in the vertical jump. The height of subjects squat jump was improved after whole body vibration treatment. Also, the lower joint moment and power increased. However, there were no statistically significant changes in GRF, hip joint moment and power after the whole body vibration proved to have positive effect on the ankle and knee joints but showed negative effect on the hip joint.