• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.297-308
• /
• 2011

The purpose of this study was to investigate the relationship among isometric and isokinetic muscle strength, lean body mass(LBM) and bone mineral density(BMD) in the elderly. Eleven males(age, 70.27${\pm}$5.78yr; height, 167.36${\pm}$6.68 cm; weight, 68.34${\pm}$8.23 kg) and thirteen female(age, 69.77${\pm}$4.13yr; height, 152.80${\pm}$4.45 cm; weight, 56.86${\pm}$7.40 kg) participated in this study. In all subjects, LBM and BMD segments was measured by using Dual-energy x-ray absorptiometry(DEXA, Lunar DPS-DM, U.S.A.). Maximum isometric and isokinetic muscle strength of flexion and extension at the knee and elbow, ankle, trunk joints were measured by using an isokinetic dynamometer(CON-TREX(R) Multi Joint Testing Module, Switzerland). The results of this study showed that isometric and isokinetic muscle strength was significantly higher in extension than flexion. In the male and female, hamstring to quadriceps strength ratio(H:Q ratio) was increased as contraction velocity increased. BMD was correlated significantly with trunk extension in the male, but not in the female. LBM was correlated significantly in the male and female with knee extension strength. This study suggests that in the elderly muscle strength training program should put more weight on extensor muscles of the body.

• Journal of Korean Medical classics
• /
• v.33 no.4
• /
• pp.167-182
• /
• 2020

Objectives : The relationship between the Lungs, Stomach and Kidneys were examined in relation to their pulses continuously beating without rest as discussed in the 『Lingshu·Dongshu』, with other chapters in the 『Huangdineijing』. Methods : Chapters in the 『Huangdineijing』 and annotations were referenced in relation to the contents in question of the 『Lingshu·Dongshu』. Results & Conclusions : In 『Lingshu·Dongshu』, the Stomach of the Zuyangming is central. In the flow of Qi that is produced and circulated from the Stomach, we can see that Ancestral qi that is created in the Stomach ascends and accumulates in the chest area to disperse Qi throughout the entire body according to breathing and pulsation, while Nutrient qi exits from the middle energizer and ascends to the Lungs, circulates the entire body and Qi that is partially similar to Defense qi moves upwards to the head and circulates. In the lower part of the body, Qi flows to the Zushaoyin that is associated with Jing qi to assist with actions of the Extra meridians, while it connects to the Ancestral sinew through Zujueyin allowing for smooth movement of the muscles and joints. The special emphasis on the pulsation points of the three meridians, Shoutaiyin, Zuyangming and Zushaoyin, is based on the Qi thoroughfare[氣街] theory, where production and circulation of all Qi in the upper, middle, and lower energizers of the body manifest as pulse movement of the three meridians, which are the fundamental rhythms and movements of life.

• Journal of KIISE:Software and Applications
• /
• v.36 no.12
• /
• pp.996-1008
• /
• 2009

This paper proposes a novel approach for the model-based pose matching of a human body using Active Shape Models. To improve the processing time of model creation and registration, we use a skeleton-type model instead of the conventional silhouette-based models. The skeleton model defines feature information that is used to match the human pose. Images used to make the model are for 600 human bodies, and the model has 17 landmarks which indicate the body junction and key features of a human pose. When applying primary Active Shape Models to the skeleton-type model in the matching process, a problem may occur in the proximal joints of the arm and leg due to the color variations on a human body and the insufficient information for the fore-rear directions of profile normals. This problem is solved by using the background subtraction information of a body region in the input image and adding a 4-directions feature of the profile normal in the proximal parts of the arm and leg. In the matching process, the maximum iteration is less than 30 times. As a result, the execution time is quite fast, and was observed to be less than 0.03 sec in an experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.693-699
• /
• 2004

Live animal selection programs that favor animals with a minimum amount of carcass fat are used for improving breeding flocks of sheep. To predict carcass characteristics of live sheep using body measurements in breeding flocks, 200 male and female lambs of two fat-tailed Iranian sheep breeds (Moghani and Makui) were used. Depth of soft tissue over the 12th rib of the live animals was measured with ultrasound (ULGR) and with hypodermic needle (NGR). The height at withers (HW), body length (BL), circumference of heart girth (CH) and width of hooks (WH), were measured. All animals were slaughtered; carcasses were cut into joints and dissected. Breed had a significant effect on all of the live easurements. The Moghani breed showed a higher value for HW, CH, ULGR and NGR, compared to that of Makui. Except for soft tissue depths; ULGR, NGR and GR, the male lambs showed higher values in live and carcass measurements than females. Percentages of carcass, total fat and intermuscular fat in females were higher than that of male lambs. In spite of the higher amount of subcutaneous and intermuscular fat in female (which is usually used for their physiological need, such as pregnancy and lactation), the male lambs had a heavier fat-tail than females. There was a wide range of variation of percentage of total carcass fat and total chemical fat content of carcass in the two breeds. Eventually this wide variation could be use by animal breeders for selection of animals with a lesser amount of carcass fat. Live weight of lambs showed a relatively low correlation with percentage of carcass lean, total fat and subcutaneous and intermuscular fat. Total lean meat was predicted with relatively high coefficients of determination in the two breeds ($R^2$=0.61 and 0.89, respectively). Live weight and carcass traits were predicted using simple measurements, but with $R^2$ ranging from 0.53 to 0.93.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.785-790
• /
• 2011

The goal of this study is to estimate the force acting on the knee joint in the human body by using the Hilltype muscle model based on a musculoskeletal model of the human lower extremity in the sagittal plane. For estimating the force applied, the human leg is modeled using multi-body modeling. This leg model comprises biarticular muscles acting on two joints of the upper and lower limbs, and the muscles include some of the major muscles such as the hamstring. In order to analyze the uncertainty of the applied forces acting on the knee joint, statistical distributions of human body, leg part, parameters are required and to obtain the parameter's statistical characteristic of the part sample survey method is employed. Finally, by using the sensitivity information of the parameters, the force acting on the knee joint can be estimated.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.85-90
• /
• 2013

Efficient gait is compensate for a lack of exercise, but the wrong walking can cause disease that joints, muscles, brain and body structure(Scott & Winter, 1990). Also many researchers has been studied gait of positive mechanism using analytical methods kinetic, kinematic. This study is to identify nature of knee adduction moment, depending on different foot progression angle and the movement of rotation of pelvis and body. Health study subject conducted intended walking with three different angles. The subjects of this study classified three types of walking; walk erect, pigeon-toed walk and an out-toed gait. Ten university students of K without previous operation and disease record selected for this study. For accuracy of this study, three types of walking carried out five times with 3D image analysis and using analysis of ground reaction force to analyze nature of knee adduction moment and the movement of rotation of pelvis and body. Firstly, the HC(heel contact) section value of intended walk erect, pigeon-toed walk and an out-toed gait was not shown statistically significant difference but TO(toe off) section value was shown that the pigeon-toed walk statistically significant. The value of pigeon-toed walk was smallest knee adduction moment(p< 0.005). Secondly, X axis was the change of rotation movement body and pelvis when walk erect, pigeon-toed walk and an out-toed gait. Shown statistically Y axis was not shown statistically significant but Z axis statistically significant(p<0.05). These result show the significant differences on TO section when walking moment reaches HC, it decides the walking types and rotates the foot.

• Journal of Korea Game Society
• /
• v.13 no.1
• /
• pp.19-30
• /
• 2013

This paper proposes a serious game for rehabilitation training targeting old persons and patients for rehabilitation. The serious game suggested for rehabilitation training provides the whole body movement recognition-based interface using the 3D depth camera. When the user stands before the camera, it distinguishes the user from the background and then recognizes the user's whole body with 15 joints. By analyzing the changes of location and direction of each joint, it recognizes gestures needed for the game. The game contents consist of the games for upper limb training, lower limb training, whole body training, and balance training, and it was realized in both 2D and 3D games. The system suggested in this article works robustly even with the environmental changes using the 3D depth camera. Even with no separate device, the game recognizes the gestures only using the whole body movement, and this enhances the effect of rehabilitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.247-252
• /
• 2005

This research presents a three-dimensional modeling technique for a flexible sheet. A relative coordinate formulation is used to represent the kinematics of the sheet. The three-dimensional flexible sheet is modeled by multi-rigid bodies interconnected by out-of-plane joints and plate force elements. A parent node is designated as a master body and is connected to the ground by a floating joint to cover the rigid motion of the flexible sheet in space. Since the in-plane deformation of a sheet such as a paper and a film is relatively small, compared to out-of-plane deformation, only the out-of-plane deformation is accounted for in this research. The recursive formulation has been adopted to solve the equations of motion efficiently. An example is presented to show the validity of the proposed method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.449-456
• /
• 2000

Remediation grouting has been widely used for the rehabilitation of various civil works like hydraulic and traffic structures. Recently there were some cases of remediation grouting for repairing old dams in korea. So this study will describe the case of remediation grouting of the concrete dam base located east-northern part of Seoul. We use Lugeon Test and Borehole Image Processing System(BIPS) for estimating the effectiveness of remediation grouting of this project. As the results of this study, we could find the lots of joints between the old concrete body and the weathered rock base. So the about 30% quantity of total cement grouts was injected at the boundary surface between concrete and rock base. And Lugeon Test and BIPS could be compared relatively because BIPS results could be presented quantitatively as well as qualitative analysis. Finally, we could find microfine cement was very effectively injected to the fine fissured concrete body compared with ordinary portland cement, but there was little injectability differences beteween microfine cement and ordinary portland cement at the large cracks or cavities were developed rock base.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.160-166
• /
• 2011

Weight reduction while maintaining functional requirements is one of the major goals in the automotive industry. The use of lightweight magnesium alloys offers great potential for reducing weight because of the low density of these alloys. However, the formability and the surface quality of the final magnesium alloy product for auto-body structures are not acceptable without a careful optimization of the design parameters. In order to overcome some of the main formability limitations in the stamping of magnesium alloys, a new approach, the so-called "hybrid technology", has been recently proposed for body-in-white structural components. Within this approach, necessary level of mechanical joining can be obtained through the use of lightweight material-steel adhesion promoters. This paper presents the development process of an automotive hybrid hood assembly using magnesium alloy sheets. In the first set of material pairs, the selected materials are magnesium alloy AZ31B alloy and steel(SGCEN) as inner and outer panels, respectively. In order to optimize the design of the inner panel, the stamping process was analyzed with the finite element method (FEM). Laser welding by CW Nd:YAG were used to join the magnesium alloy sheets. Based on the simulation results and mechanical test results of the joints, the determination of die design variables and their influence on formability were discussed. Furthermore, a prototype based on the proposed design was manufactured and the static stiffness test was carried out. The results demonstrate the feasibility of the proposed hybrid hood with a weight reduction of 25.7%.