• Animal Bioscience
• /
• v.37 no.4
• /
• pp.555-566
• /
• 2024

Objective: This study aimed to assess the genetic parameters and accuracy of genomic predictions for twenty-four linear body conformation traits and overall conformation scores in Korean Holstein dairy cows. Methods: A dataset of 2,206 Korean Holsteins was collected, and genotyping was performed using the Illumina Bovine 50K single nucleotide polymorphism (SNP) chip. The traits investigated included body traits (stature, height at front end, chest width, body depth, angularity, body condition score, and locomotion), rump traits (rump angle, rump width, and loin strength), feet and leg traits (rear leg set, rear leg rear view, foot angle, heel depth, and bone quality), udder traits (udder depth, udder texture, udder support, fore udder attachment, front teat placement, front teat length, rear udder height, rear udder width, and rear teat placement), and overall conformation score. Accuracy of genomic predictions was assessed using the single-trait animal model genomic best linear unbiased prediction method implemented in the ASReml-SA v4.2 software. Results: Heritability estimates ranged from 0.10 to 0.50 for body traits, 0.21 to 0.35 for rump traits, 0.13 to 0.29 for feet and leg traits, and 0.05 to 0.46 for udder traits. Rump traits exhibited the highest average heritability (0.29), while feet and leg traits had the lowest estimates (0.21). Accuracy of genomic predictions varied among the twenty-four linear body conformation traits, ranging from 0.26 to 0.49. The heritability and prediction accuracy of genomic estimated breeding value (GEBV) for the overall conformation score were 0.45 and 0.46, respectively. The GEBVs for body conformation traits in Korean Holstein cows had low accuracy, falling below the 50% threshold. Conclusion: The limited response to selection for body conformation traits in Korean Holsteins may be attributed to both the low heritability of these traits and the lower accuracy estimates for GEBVs. Further research is needed to enhance the accuracy of GEBVs and improve the selection response for these traits.

• Animal Bioscience
• /
• v.35 no.4
• /
• pp.517-526
• /
• 2022

Objective: The growth differentiation factor 8 (GDF8) gene plays a key role in bone formation, resorption, and skeletal muscle development in mammals. Here, we studied the genetic variants of GDF8 and their contribution to body conformation traits in Chinese Dabieshan cattle. Methods: Single nucleotide polymorphisms (SNPs) were identified in the bovine GDF8 gene by DNA sequencing. Phylogenetic analysis, motif analysis, and genetic diversity analysis were conducted using bioinformatics software. Association analysis between five SNPs, haplotype combinations, and body conformation traits was conducted in 380 individuals. Results: The GDF8 was highly conserved in seven species, and the GDF8 sequence of cattle was most similar to the sequences of sheep and goat based on the phylogenetic analysis. The motif analysis showed that there were 12 significant motifs in GDF8. Genetic diversity analysis indicated that the polymorphism information content of the five studied SNPs was within 0.25 to 0.5. Haplotype analysis revealed a total of 12 different haplotypes and those with a frequency of <0.05 were excluded. Linkage disequilibrium analysis showed a strong linkage (r²>0.330) between the following SNPs: g.5070C>A, g.5076T>C, and g.5148A>C. Association analysis indicated these five SNPs were associated with some of the body conformation traits (p<0.05), and the animals with haplotype combination H1H1 (-GGGG CCTTAA-) had greater wither height, hip height, heart girth, abdominal girth, and pin bone width than the other (p<0.05) Dabieshan cattle. Conclusion: Overall, our results indicate that the genetic variants of GDF8 affected the body conformation traits of Chinese Dabieshan cattle, and the GDF8 gene could make a strong candidate gene in Dabieshan cattle breeding programs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.311-317
• /
• 2015

Phenotypic characterization and body biometric in 13 traits (height at withers, body length, chest girth, paunch girth, ear length, tail length, length of tail up to switch, face length, face width, horn length, circumference of horn at base, distances between pin bone and hip bone) were recorded in 233 adult Gojri buffaloes from Punjab and Himachal Pradesh states of India. Traits were analysed by using varimax rotated principal component analysis (PCA) with Kaiser Normalization to explain body conformation. PCA revealed four components which explained about 70.9% of the total variation. First component described the general body conformation and explained 31.5% of total variation. It was represented by significant positive high loading of height at wither, body length, heart girth, face length and face width. The communality ranged from 0.83 (hip bone distance) to 0.45 (horn length) and unique factors ranged from 0.16 to 0.55 for all these 13 different biometric traits. Present study suggests that first principal component can be used in the evaluation and comparison of body conformation in buffaloes and thus provides an opportunity to distinguish between early and late maturing to adult, based on a small group of biometric traits to explain body conformation in adult buffaloes.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.740-750
• /
• 2021

This study was performed to investigate genetic relationship of age at first calving (AFC) with body development and reproduction capacity in female Hanwoo. The data sets of 52,299 reproduction records of 19,566 heads calved from 2011 to 2019 and conformation records of 19565 heads born from 1997 to 2017 were analyzed by separating them based on age at first calving. In the analysis, conformation traits included the body condition score (BCS), height (HT), body width (BW), hip bone length (HL), hip bone width (HW), and final score (FS). The heritability and genetic correlation of AFC with conformation traits and calving interval (CI) were analyzed. The heritability for AFC was 0.716, 0.087, and 0.097 for the before and after 24 months and combined data, respectively. The genetic correlation of AFC before 24 months with BCS was -0.778, -0.600 with BW, and 0.442 with HT. The genetic correlation of AFC after 24 months with HT was -0.826, -0.706 with BW, -0.623 with HL, -0.456 with HW, and -0.675 with FS. When the first calving age of young heifers approached 24 months, BCS and BW decreased, and HT increased. When first calving is delayed to after 24 months, the conformation traits become smaller, which indicates that conformation to some extent affects the delay in AFC. The genetic correlation between CI and AFC was -0.116, 0.307, and 0.250 for the before and after 24 month of AFC and combined data, respectively. When first calving date approached 24 months, CI was reduced. The obtained results suggest that it is important that first calving occurs at an appropriate age. Additional research is needed to perform proper genetic evaluation of first calving age in Hanwoo cattle in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.449-456
• /
• 2011

Eighteen different biometric traits in 407 Kankrej cows from their breeding zone, i.e. Palanpur district of Gujarat, India, were recorded and analyzed by factor analysis to explain body conformation. The averages of body length, height at withers, height at shoulder, height at knee, heart girth, paunch girth, face length, face width, horn length, horn diameter, distance between horns, ear length, ear width, neck length, neck diameter, tail length with switch, tail length without switch and distance between hip bones were $123.44{\pm}0.37$, $124.49{\pm}0.28$, $94.68{\pm}0.30$, $38.2{\pm}0.14$, $162.56{\pm}0.56$, $178.95{\pm}0.70$, $44.09{\pm}0.10$, $15.91{\pm}0.05$, $42.47{\pm}0.53$, $26.07{\pm}0.19$, $13.34{\pm}0.08$, $31.24{\pm}0.12$, $16.10{\pm}0.05$, $50.63{\pm}0.18$, $73.21{\pm}0.32$, $111.62{\pm}0.53$, $89.34{\pm}0.34$ and $17.28{\pm}0.10\;cm$, respectively. The correlation coefficients between different traits ranged from -0.806 (horn diameter and distance between horns) to 0.815 (heart girth and paunch girth). Most of the correlations were positive and significant. Factor analysis with promax rotation with power 3 revealed three factors which explained about 66.02% of the total variation. Factor 1 described the cow body and explained 38.89% of total variation. The second factor described the front view/face of the cow and explained 19.68% of total variation. The third factor described the back of the cow and explained 7.44% of total variation. It was necessary to include some more variables for factor 3 to obtain a reliable estimate of the back view of the cow. The lower communities shown for distance between horns, horn diameter, ear width and neck diameter indicated that these traits did not contribute effectively to explaining body conformation and can be dropped from recording, whereas all other traits are important and needed to explain body conformation in Kankrej cows. The result suggests that principal component analysis (PCA) could be used in breeding programs with a drastic reduction in the number of biometric traits to be recorded to explain body conformation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.322-329
• /
• 2011

A whole genome association (WGA) study was conducted to identify quantitative trait loci (QTL) for body conformation traits in Hanwoo cattle. The phenotypes of 497 steers were recorded from the Hanwoo Improvement Center of National Agricultural Cooperative Federation, Seosan, Korea, and analyzed using the Illumina Bovine 50 k SNP chip. A set of 35,987 SNPs that were available in the Hanwoo population was selected from the chip. After adjustments for the effects of year-season of birth, region and sire, phenotypes were regressed on each SNP using a linear regression model. Three hundred nineteen SNPs were detected for the ten conformation traits (p<0.003). For the significant SNPs, stepwise regression procedures were applied to determine best sets of markers. A total of 72 SNPs were selected (p<0.001), for which the sets of 5, 9, 10, 9, 8, 11, 4, 6, 3 and 7 SNPs were determined for height at withers, rump height, body length, chest depth, chest width, rump length, hip width, thurl width, pinbone width and heart girth, respectively. About 7-26% of the total phenotypic variation was explained by the set of SNPs for each trait. QTL for the conformation traits were harbored on most bovine chromosomes (BTAs). Four SNPs with pleiotropic effects on height at withers and rump height were detected on BTAs 3, 4, 6 and 16. A SNP with pleiotropic effects on chest width and rump length was also detected on BTA10. Two QTL regions, i.e. between 87 and 97 Mb in BTA3 and between 41 and 44 Mb in BTA7, were found, in which SNPs were detected for the five and three conformation traits, respectively. The detected SNPs need to be validated in other Hanwoo populations for commercial application to the genetic improvement of conformation characteristics in Hanwoo via marker-assisted selection (MAS).

• Korean Journal of Acupuncture
• /
• v.28 no.1
• /
• pp.157-169
• /
• 2011

Objective : Nine classical needles have been recorded in oriental medical classics as a diversified instrument for acupuncture to treat patients with various symptoms. Recently, it has suggested that doctors didn't make full use of acupuncture and that poor understanding of the nine needles has caused the lack of usage. Methods : It has studied bibliographically about the conformation including a length & shape and application & usages of the nine classical needles presented in oriental medical classics. Results : Chamchim (shear needle) has 1.6 chon (寸) length, sharp apex treating fever in the head and trunk; Wonchim (roun-pointed needle) has 1.6 chon, eggshaped apex treating disease of flesh by massaging with it; Sichim (spoon needle) has 3.5 chon, thick body with round sharp apex treating weakness of Qi; Bongchim (lance needle) has 1.6 chon, a triangled apex treating chronic disease with bleeding; Pichim (stiletto needle) has 4 chon, razor sharp applying to surgery of big pus; Wonlichim (round-sharp needle) has 1.6 chon, thin body, sharp apex treating acute arthralgia syndromes; Hochim (filiform needle) has various lengths which treats various disease of meridians and organs; Jangchim (long needle) has 7 chon, sharp apex treating chronic arthralgia syndromes in deeper place of body; Daechim (large needle) has 4 chon, nail like apex applying to excrete artheredema in joints. Conclusions : The conformation of nine classical needles has been changed from those recorded in oriental medical classics since it was developed. However, the usage of nine classical needles has remained the same. Therefore it is considered that intrinsic attribute of the nine needles has preserved even though the conformation of nine classical needles has changed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1250-1253
• /
• 2014

The objective of this study was to estimate the parameters of Gompertz growth curves with the measurements of body conformation, real-time ultrasound longissimus dorsi muscle area (LMA) and backfat thickness (BFT) in Hanwoo cows. The Hanwoo cows (n = 3,373) were born in 97 Hanwoo commercial farms in the 17 cities or counties of Gyeongbuk province, Korea, between 2000 and 2007. A total of 5,504 ultrasound measurements were collected for the cows at the age of 13 to 165 months in 2007 and 2008. Wither height (HW), rump height (HR), the horizontal distance between the top of the hips (WH), and girth of chest (GC) were also measured. Analysis of variance was conducted to investigate variables affecting LMA and BFT. The effect of farm nested in location was included in the statistical model, as well as the effects of HW, HR, WH, and GC as covariates. All of the effects were significant in the analysis of variance for LMA and BFT (p<0.01), except for the HR effect for LMA. The two ultrasound measures and the four body conformation traits were fitted to a Gompertz growth curve function to estimate parameters. Upper asymptotic weights were estimated as $54.0cm^2$, 7.67 mm, 125.6 cm, 126.4 cm, 29.3 cm, and 184.1 cm, for LMA, BFT, HW, HR, WH, and GC, respectively. Results of ultrasound measurements showed that Hanwoo cows had smaller LMA and greater BFT than other western cattle breeds, suggesting that care must be taken to select for thick BFT rather than an increase of only beef yield. More ultrasound records per cow are needed to get accurate estimates of growth curve, which, thus, helps producers select animals with high accuracy.

• Journal of Microbiology
• /
• v.34 no.1
• /
• pp.54-60
• /
• 1996

Taking advantage of the heat inducible HSP82 gene in yeast, chromatin structure after transcription cessation was investigated. Alteration of chromating conformation within the HSP82 gene transcription unit into an active state has been shown to correlate with its transcriptional induction. It was thus of interest to examine whether the active chromatin state within the HSP82 mRNA analysis, the gene ceased its transcription within a few hours of cultivation at a normal condition after heat induction. In this condition, an active chromatin conformation in the HSP82 gene body was changed into an inactie state which was revealed by DNase I resistance and by typical nucleosomal cutting periodicity in the corresponding chromatin. These results thus ruled out the possibility of a long-term maintenance of the DNase I sensitive chromatin after transcription cessation. DNA replication may be a critical event for the chromatin reprogramming.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.119-122
• /
• 1995

A total of 6 tamaraws were observed for determining coat color and measured for body conformation. Banding pattern of 4 blood proteins and 2 isozymes were analysed from the peripheral blood of two tamaraws. The coat colour of younger tamaraws were observed to be brown and adult was found to be complete black. The body weight, body length, withers height, head length, head width, horn length and tail length of adult male and female tamaraws were: 236 kg and 208 kg; 113.5 cm and 112.5 cm; 19.5 cm and 20 cm; 30.0 cm and 28.5 cm and 36.0 cm and 35.5 cm, respectively. The electrophoretic banding pattern, distance migrated and the allelic frequencies obtained in tamaraws were similar compared with that reported in swamp buffaloes. Although the sample size was very small, results of this study could be an important source of informations based on which a breeding programme can be designed to exploit some of the economic characters of tamaraw.