• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.91-98
• /
• 2004

This paper is concerned with crash analysis for an auto-body member with the forming effect. Auto-body members such as a front frame assembly are fabricated with sheet metal forming processes that induce forming histories such as the plastic work hardening and non-uniform thickness distribution. Numerical simulation is carried out with LS-DYNA3D in order to identify the forming effect on the crashworthiness. The crash analysis of the front frame assembly with the forming effect leads to a different result from that without the forming effect. Crashworthiness such as the load-carrying capacity, the crash mode and the energy absorption are calculated to investigate and identify the forming effect. It is fully demonstrated that the design of auto-body members needs to consider the forming effect for accurate assessment of the load-carrying capacity and the deformation mechanism of the formed members.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.7-9
• /
• 1999

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.1
• /
• pp.61-76
• /
• 2024

The purpose of this study is the development of an experimental design that aims to implement three-dimensional fashion design by observing the human body, extracting and combining geometric shapes and forms, and focusing on attempts to decompose the geometry of the human body in art history. Considering the characteristics of fashion design, which inevitably reflect human images visually, this study considered works by deriving geometric shapes and forms of the human body and focusing on decomposition and combination to apply them to fashion design. The results obtained through the development of fashion design through decomposition and combination based on geometric human body analysis are as follows. First, geometric analysis of the human body as an object of expression continues from the history of Cubism to modern fashion design. Second, the geometric shapes of the human body that appear in contemporary fashion design maximize visual effects through three-dimensional composition, emphasizing simplicity while showing originality through various expressions. Third, when exploring the geometric shapes of a moving human body, it was possible to extract a wide variety of shapes and forms through drawing and simplifying the human body's movements. Fourth, the formative method of fashion design was introduced and used for the aesthetic combination of objects for fashion design through decomposition and combination. This study was able to show unique and diverse combinations of visually concise and ordered geometric shapes in the expression of fashion design by decomposing and combining them. The significance of these geometric forms is that they can diversify formative informativeness in the expression of fashion design with modern compositional beauty.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.79-84
• /
• 2011

In general, a valve body of the automatic transmission(AT) is controlled by the clutch, the brake and lubricating oil flow in a hydraulic system and lubricant flow for each valve can be adjusted independently. To increase the lifetime of AT, the lubrication flow rate in a valve body for a 6 speed AT based parallel hybrid electric vehicle must be provided with proper oil distribution and control. In this study, we carried out several experiments without the inner parts of AT and with a AT assembly. The variation of the flow rate on oil temperature and pressure between an oil supply port and the outlets of the lubrication port was evaluated and analyzed. In the case of AT without the inner parts, it was evident that as the oil required for an operation of the clutch and brake was discharged from the outlet port, the flow rate from each lubrication port is decreased. However, the flow rate of the AT assembly was slightly increased. In addition, the lubrication flow rate was increased with increasing the oil temperature, and also it was reduced with increasing the oil pressure. Details of the resulting data are discussed.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.75-82
• /
• 2021

The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm² was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.

• Korean Security Journal
• /
• no.50
• /
• pp.307-337
• /
• 2017

The freedom of assembly is the fundamental freedoms guaranteed by the Constitution. However, as far as our reality is concerned, the freedom of assembly is guaranteed only when it is under the control of the police, and otherwise it is perceived as an object to be suppressed. Police say even that they will not tolerate even a small illegal law while referring to the "broken window theory". Therefore, regardless of the peaceful nature of the rally, it is too obsessed with 'compliance'. This attitude is causing the citizens who participated in the assembly to be put to the object to be suppressed. This paper analyzes the requirements and current status of police force, focusing on the vehicle-wall-blocking and water cannon as a means of using the police force, which is a recent problem, and suggests ways to improve it. First of all, the installation of the wall cuts off the essential communication function of the assembly by separating the meeting place from the object of protest. Thus, despite the warning for prevention in the face of illegal acts, other than installing a barrier, it should be allowed only in the 'urgent case where there is a risk of causing damage to the life, body or property of the person'. Without this urgency, the vehicle-wall-blocking should not be allowed to be proactive as well as preventive. Secondly, the water cannon is a police force that is likely to harm people's life and body. Therefore, aiming shots, which could pose a significant risk to the human body, should in principle be prohibited. However, considering its risk, it should be supplementary used only when there is no other alternative, only when the direct risk to the legal interest of the other person or the order of public well-being is 'obvious'. In addition, as for the use standard of such a thing, it is necessary to be specified by law.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.1008-1012
• /
• 2012

Injection molds are fabricated by assembling a number of plates in which mold core and cavity components are inserted. The assembled structure causes a number of contact interfaces between each component where the heat transfer is affected by the thermal contact resistance. However, the mold assembly has been treated as a one body in numerical analyses of injection molding, which has a limitation in predicting the mold temperature distribution during the molding cycle. In this study, a numerical approach that considers the thermal contact effect is proposed to predict the heat transfer characteristics of an injection mold assembly. To find the thermal contact conductance between the mold core and plate, a number of finite element (FE) simulations were performed with the design of experiment (DOE) and statistical analysis. Thus, the heat transfer analyses using the obtained conductance values can provide more reliable results than conventional one-body simulations.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.95-109
• /
• 2020

In this paper, an optimal manufacturing system design problem in an automotive body assembly lines is introduced when various costs such as equipment investment costs are considered. Meta-model methodology based on simulation results has been used for estimating the performances of the system such as production rate and work-in-process levels. The objective function is minimizing total cost which satisfies the target production rate. The investment costs such as robots, buffers, transportation equipment, and the inventory holding cost of work-in-process have been included in the objective function. Harmony search method has been used for optimization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2555-2560
• /
• 1996

Inspecting the dimensional accuracy of a car-body in assembly line is a very important process to assure high productivity. Now there exist two common inspecting methods in practice. One is to measure a sampled car-body with three dimensional measuring machine, and the other is to measure car-body with three dimensional measuring machine, and the other is to measure car-body in assembly line using many sensors fixed to a large jig frame. The formal method takes too long to inspect a sampled car-body of a same sort, and cannot therefore give an useful error trend for the whole production. On the other hand, the latter lacks flexibility and is very cost-intensive. By using industrial robots and sensors, an in-line Car-Body Measuring(CBM) system which ensured high flexiblity and sufficient accuracy was developed. This CBM cell operates in real production line and measures the check points by the non-contact type using camera and laser displacement sensor(LDS). This system can handle about 15 Measuring points within a cycle time of 40 seconds. A process computer controls whole process such as data acquisition file handling and data analysis. Robot arms changes in length due to ambient temperature fluctuation affecting the measuring accuracy. To compensate this error, a robot arm calibration process was developed.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.6
• /
• pp.5-11
• /
• 2015

In a pressurized water reactor (PWR), control rod assembly (CRA) falls into the guide tubes of a fuel assembly due to gravity for scram. Various theoretical approaches and numerical analyses have been performed because its shape is simple and its design was completely developed several decades ago. A control rod assembly for a sodium-cooled faster reactor (SFR) which is geometrically more complicated is being actively developed in Korea nowadays. Drop time and impact velocity of a CRA are important parameters with respect to reactivity insertion time and the mechanical robustness of a CRA and a guide duct. In this paper, computational method considering simultaneously the equation of motion for rigid body and the Navier-Stokes equations for fluid is suggested and verified by comparison with theoretical analysis results. Through this valuable CFD analysis method, drop time and impact velocity of initially designed SFR CRA are evaluated before performing scram tests with it.