• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.96-101
• /
• 2006

In ship operation the consequence of roll and pitchingmotion can seriously degrade the performance of mechanical and personnel effectiveness. So many studies for the roll stabilization and trimming control system design have been performed and good results have been achieved where the stabilizing fins, tanks, rudders and flaps are used. However the ultimate objective of such approach should be focused on improving the boarding sensitivity. But there may exist many unsolved problems, for examples, ship control performance degradation and increasing of system complexity. So, the achieved control performance could not give us enough comfortable boarding sensitivity where the residual rolling and pitching motion are main drawbacks. To get rid of these disadvantages, the main hull control systems design approach has been considered using semiactive absorber. In this system, dampers, spring, dynamic dampers and control system with sensors are incorporated. In our system considered in this study, just two motors and control system with sensors are used for the bed. And the control system can be installed on each bed. So, we can control every bed on the specified control objective respectively. Above all, the good advantages of this system are the facts followed from simple idea and usefulness. Of course the structural modifications are needed. Considering disturbances, we design control system and verify the usefulness of developed system from the experimental study.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.126-133
• /
• 2014

For boarding comfort and pleasant boarding sensitivity of passenger in passenger ship, there are a few methods such as motion sickness rate or MSI(Motion Sickness Incidence) to assess safety of passenger ship. To find out MSI or motion sickness rate of the training vessel Kaya of Pukyong National University, we use lots of various factors: sea condition, incident angle in main sail way, economic speed, calculation position of motion sickness, sea state, work place and reduce zone of ship. In this paper, we adopted Maxsurf Seakeeper program based on Strip Theory and carefully compared theoretical results with experimental results.

• Journal of Power System Engineering
• /
• v.18 no.4
• /
• pp.112-116
• /
• 2014

Roll and pitching motions of a vessel can seriously degrade the performance of mechanical systems and the effectiveness of personnel. Many studies on roll stabilization and trimming control system design have focused on stabilizing the vessel through the use of fins, tanks, rudders and flaps. However the ultimate objective of such approaches must be to improve boarding sensitivity. This paper presents an anti-seasickness bed that consists of a rotator and bearing system that does not make use of electric power. The advantages of this system are its simple construction, usefulness, and safe operation. In this study, the rotation angles of the upper plate of a bed according to change weight of the rotator have been calculated to determine the stability. As a result, it can be concluded that proposed stabilizing bed can be of practical use in the field.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3289-3298
• /
• 2011

The region trunk line railroad route considering regional characters is the final aim of railroad management to operators and passengers. For reflecting these aspect to make policies, The study has been performed by defining and analyzing the informations. According to the methodological and political research, First of all, The feature for demand and supply of railroad in the region trunk line railroad route is that demand aspect was excessively influenced by supply aspect. The demand sensitivity was measured very high on the supply changes. The survey, Containing the regional characters, result the railway and bus use patterns are clearly different and this feature is simiral to that of janghang and pohang district. also, In railroad case, Demand shifts from railroad to other transport sensitively. Therefore, We make some new index besides existing index, which like to management index, rate of boarding, rate of using. After that, We suggest passengers and operator's win-win alternatives.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.2
• /
• pp.5-9
• /
• 2013

The aim of present study is to evaluate the stability of GM(Metacentric Height) calculation and investigate the damping effect of free rolling test. Moreover, GZ(Righting arm in stability) curve shows that it can provide reasonable design conditions for Fish boat. The roll damping characteristics of the improved model for an 7.9 ton class fishing boat are investigated through the free roll test in towing tank. The safety and boarding sensitivity are evaluated by GM calculation and roll motion period. Therefore, the results in this paper describe that the effect for improved hull is more improved than the original hull.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.4
• /
• pp.275-284
• /
• 2010

Deliberate self-harm (DSH) is the act of deliberately harming your own body, such as cutting or burning yourself, without suicidal intent. It has especially become a problem among adolescents and college-age students in institutional settings such as boarding schools, Greek houses, detention centers and hospitals. We focus on contagion of DSH among adolescents and young adults by creating a deterministic epidemiological model. We study the impact of actual peer pressure, virtual peer pressure (the Internet) and treatment analytically in terms of a basic reproduction number through stability analysis of a system of ordinary differential equations. All parameters are approximated and results are also explored by simulations. The model shows that DSH is present in an endemic state in the population considered, and the control strategies are discussed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.255-255
• /
• 2017

본 연구에서는 고속으로 활주하는 선박의 승선감 향상 및 운항성능 특성 연구를 위해 30ton급 세관감시정의 측정위치에 따른 멀미도 해석을 수행하였다. 특히, 관공선내의 선원들은 유사시에 신속 정확한 판단이 요구되므로 측정위치에 따른 멀미도의 영향에 대한 연구가 필요할 것으로 판단하였다. 멀미도 평가는 ISO 2631-3(1985)을 기준으로 하였다. 평가 기준은 30분, 2시간, 8시간 이후 성인 100명 중 10명이 멀미를 한다는 국제표준 지표이며 조우주파수와 수직가속도 성분으로 나타난다. 멀미도 해석은 Maxsurf Motion 모듈을 이용하였다. 30ton급 세관감시정은 고속활주형 선박의 특성을 갖기 때문에 선속에 따른 트림변화를 고려하였다. 입사각은 선체 전 방향에서의 영향을 고려한 범위로 선정하였다. 선속의 경우 선박 운용상태(정박, 저속, 고속)을 고려하여 적용하였다. 측정위치의 경우 선원들의 주 활동 구역을 고려하여 선정하였다. 해석결과 멀미도의 영향은 30knot, $180^{\circ}$의 경우에 가장 크게 분석되었다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.55-65
• /
• 2023

Due to extreme urbanization, ground transportation in the city center is saturated, and problems such as the lack of expansion infrastructure and traffic congestion increase social costs. To solve this problem, a 3D mobility platform, Urban Air Mobility (UAM), has emerged as a new alternative. A vertiport is a physical space that conducts a similar role to an airport terminal. Vertiport consists of take-off and landing facilities (TLOF, Touchdown and Lift-Off area), space for boarding and disembarking from UAM aircraft (gates), taxiways, and passenger terminals. The type of vertiport (structure, number of facilities) and concept of operations are key variables that determine the number of UAM aircraft that can be accommodated per hour. In this study, a capacity calculation method was presented using an optimization technique (Deterministic Integer Linear Programming). The absolute capacity of the vertiport was calculated using an optimization technique, and a sensitivity analysis was also performed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.412-418
• /
• 2014

In this paper, for better boarding performance and pleasant boarding sensitivity of the ship, comparison and analysis was performed of motion sickness questionnaire with MSI(Motion Sickness Incidence) calculation based on ship motion theory(Strip Method) due to sea condition, incident angle in main sail way, economic speed, and calculation position of the training ship Kaya of Pukyong National University. On theses works, the rougher sea conditions became, the higher total motion sickness rate was occurred. The weights of vertical acceleration and the rates of MSI were higher at the bridge and the accommodation, which were located farther from the center of gravity of the ship. And effects of the vertical acceleration of the ship were increased in rolling then in head sea. In comparison between motion sickness questionnaire with MSI calculation, when the vertical acceleration increased, the motion sickness rate increased. The location to increase vertical acceleration and the location to cause motion sickness were agreed.