• 한국항공우주학회지
• /
• 제48권1호
• /
• pp.63-72
• /
• 2020

본 연구에서는 위성용 전장품 보드의 성능 요구조건과 설계 복잡도가 높아지면서 증가되는 노이즈 문제를 최소화하기 위해 전원 건전성(Power Integrity) 및 신호 건전성(Signal Integrity)의 설계 분석이 수행되었고 이를 통해 적용된 설계 개선 내용을 기술하였다. 전원 건전성은 정전류 전압강하(DC IR drop) 해석을 통해 정적 전원의 특성을 분석하였고, 각 전원의 임피던스 해석을 통해 동적 전원의 특성을 분석하여 각 분석 결과를 이용한 설계 개선 방안들이 적용되었다. 신호 건전성 측면에서는 주요 데이터버스 신호에 대한 시간영역 파형 분석과 PCB(Printed Circuit Board) 설계 수정을 통해 노이즈가 개선된 결과를 확인하였다. 또한 설계된 PCB 보드의 전원 층에 대한 공진모드를 분석하여 발생된 공진 영역들에 완화 조치를 적용하였고 조치결과를 시뮬레이션을 통해 확인하였다. 최종적으로 분석을 통해 설계 개선이 적용된 유닛에 대해 수정 전과 후의 EMC(Electro Magnetic Compatibility) RE(Radiated Emission) 노이즈 측정결과를 비교함으로써 방사성 노이즈가 감소되었음을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.19-22
• /
• 2004

In this paper, we present a way that can implement the vector control Algorithm of induction motor and PWM signal generation on the basis of Matlab Simulink environment. The overall system model is designed by Simulink toolbox for vector control of induction motor, and then implement experiment with the DS1103 board of dSPACE. Although we are not coding the system, it is capable of doing simulation and experiment simultaneously. That is why Matlab and dSPACE board compiler can generate the '*.c' and '*.obj' files on the designed system automatically. After considering about hardware structure and driving system in Ds1103 board we verify the availability of Proposed method through in a comparison/analysis between simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.729-732
• /
• 2001

Digital signal processors(DSP) are widely used in modern power conversion devices, ac motor drives. However, generating pulse-width modulation(PWM) gating signals requires so high sampling rates that most computation resources of the DSP must be devoted to generating them. This paper presents an ASIC realization of 2 channel space-vector PWM(SVPWM). The developed DSP(ECLDSP) board can transmit gating signals to 2 converter/inverter and control them. ECLDSP board is used for control the various kinds of power-quality improvement systems.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.321-323
• /
• 2009

When power failure occurs at multi-housing complex, auxiliary generator or emergency generator starts to provide power to households. This power is connected to emergency power ELB(Earth Leakage Breaker) at home distribution panel board and supplies power only for emergency light in living room but for heating system, refrigerator and other inevitable apparatuses that are in need of uninterruptible power. Since those domestic appliance are fed from common power line, they are inoperable during power failure. Our research is to resolve this problem by developing compatible relay-drive common/emergency-power ATS (automatic transfer switch) for home distribution panel board. In case of power failure, it transfers automatically and commences to provide power from emergency generator. Through this, Consumers can reach satisfaction where common power loads operate without any problem under both ordinary and power failure condition.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.371-374
• /
• 2009

본 논문은 대한민국 해군의 차세대호위함인 FFX(Fast Frigate eXperimental)에 장착/운용되는 LAS(Line Array Sensor, 예인배열형센서)로부터 A,B,C 그룹 수중음향신호의 시리얼 데이터를 입력받아 약속된 Protocol로 Packing하여, 고속 데이터통신과 Optic-fiber채널 장거리 전송이 가능한 SFM(Serial FPDP Module)을 통해 신호처리단으로 실시간 전송하는 센서데이터입출력처리보드의 설계/제작 및 시험에 관해 논한다. VME 6U크기의 한정된 보드 공간을 고려하여 Freescale사의 PowerPC계열인 MPC8265 CPU와, FIFO등의 외부디바이스를 줄이고 자체시뮬레이션 데이터생성등을 위해 Altera사의 CycloneIII 계열 FPGA등을 사용하여 설계하고, 실시간 데이터 전송을 보장하며 각종 Device Driver, Peripheral Controller등의 Library를 제공하는 RTOS인 VxWorks를 Porting하여 소프트웨어를 개발하였다.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.93-99
• /
• 2009

A new plasma display panel sustaining driver using single side sustaining technique with a dual resonant method is proposed in this paper. Since this circuit enables to keep device voltage stress same as the prior circuit, it can be a low cost circuit compared to a conventional driver. To integrate the sustaining function into one side with a single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and to achieve dual resonant energy recovery on the sustaining modes.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.

• 한국컴퓨터정보학회논문지
• /
• 제23권3호
• /
• pp.9-16
• /
• 2018

In this paper, I purpose one of the development methods for portable Automatic field Test Equipment(ATE) with VME form factor. Almost portable ATE have not used to standards form factor and they are connected by mechanical non-rigid general connectors and wire harnesses among the components. Furthermore, it is hard to reuse developed board. So, it decreases to reusability of developed board and it is hard to maintenance of ATE. Even those things have weakness for vibration and drop test especially in portable ATE. The XK9A1 ATE using VME form factor has environmental reliability through vibration, drop, temperature test. It consists of 5 developed board called the control board, the wire & wireless communication board, the power supply board, the load board and the mother board. It is connected by two wire harnesses between mother board and extern circular connectors. The control board send the data and address to other board though each 16-bit data and 20-bit address line. You can develop the function board what you want to using those data & address line when it comes to needing other function board.

• 항공우주기술
• /
• 제4권2호
• /
• pp.79-87
• /
• 2005

본 논문은 차세대 위성을 위한 탑재컴퓨터 구조, 설계에 대한 논문이다. 차세대 위성용 탑재 컴퓨터는 MCMERC32SC CPU를 사용하고 중앙 집중 처리 구조를 채택하고 있다. 이를 위해 PM32 Module, TC-TM Module, IO Module 및 Power Module로 구성되어 있다. 각 Module간의 통신은 IEEE-1355 DS/DE(SpaceWire) 통신 방식을 채택하였다. 간단한 cross-strap 방법을 사용함으로서 모듈들의 잉여성 관리와 재사용성 증가를 손쉽게 할 수 있도록 하고 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.851-854
• /
• 2004

This paper studies Optical Fiber(OF) - LED illuminated display board system for energy saving. The OF-LED illuminated display board system has PV modules, batteries, and charge & discharge system, and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant current controls (CCVC) are used In govern the charging system. It can be improve the charging efficiency of battery. The objective of this thesis paper is to build advertisement lighting system with OF-LED in to charge a 12-volts lead acid battery by using a field wired PV array. We saved the maintenance cost and developed of advertisement effectiveness. To verify the proposed OF-LED illuminated display board system for energy saving, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.